BRINKS DCU-500 Manuel utilisateur
TABLE OF CONTENTS
HOW TO AVOID FALSE ALARMS............................................................ 1
THE BRINK’S HOME SECURITY SYSTEM
Equipment in the Standard Systems....................................................... 2
Optional Equipment................................................................................. 3
Description of the Keypad........................................................................ 5
OPERATING THE BRINK’S SYSTEM
Normal Operating Mode.......................................................................... 6
Turning the System ON........................................................................... 6
Not Ready Status.................................................................................... 7
Turning the System OFF.......................................................................... 7
Turning System OFF and Canceling a Sounding Alarm.......................... 8
Turning System OFF After an Alarm in Your Absence............................. 8
What to do in an Actual Emergency......................................................... 9
Turning System ON with Motion Detectors Off........................................ 9
Turning System ON with Delay Doors Instant.......................................... 9
Turning System ON with Motion Off and Doors Instant........................... 9
Using the Keypad’s Emergency Buttons................................................ 10
USING SYSTEM OPTIONS
Bypass.................................................................................................. 11
Door Chime........................................................................................... 11
Adding Auxiliary Codes......................................................................... 12
Deleting Auxiliary Codes....................................................................... 12
Viewing Alarm Memory.......................................................................... 12
TESTING THE BRINK’S SYSTEM
Transmission and Siren Test.................................................................. 13
Testing the Door and Window Sensors.................................................. 13
Testing the Motion Detector................................................................... 14
Testing the Smoke Detector (Optional Feature).................................... 14
TROUBLE MESSAGES
No AC Power Indication........................................................................ 15
Low Battery Indication........................................................................... 15
Trouble on Fire Zone Indication............................................................. 16
Communication Problem Indication....................................................... 16
CLEANING THE SMOKE DETECTOR (Optional Feature)................... 17
EMERGENCY EVACUATION PLANS................................................... 18
QUESTIONS AND ANSWERS.............................................................. 20
1
How to Avoid False Alarms
Avoiding false alarms is critical to better monitoring service and preventing
false alarm fines from your local municipality. Below are tips to help you
receive better alarm response.
• Select the seven day training period on your Emergency Information
Schedule.
• Select the “standard” procedure for intrusion alarms on the Emergency
Information Schedule.
• Make sure everyone in your house knows how to use the alarm system.
They should all know a valid three-digit code and the codeword. Notify
Brink’s if you are going to sell or rent your home, so we can assist the
new residents.
• Cancel all accidental alarms by entering your three-digit code, then press
CANCEL. (You can also cancel accidental alarms in reverse order by
first pressing CANCEL then entering your three-digit code.) See page 10
for more details.
• Test the system each week and promptly notify Brink’s Customer Service
of any problems at 1-800-445-0872. Customer Service is available 24
hours a day, seven days a week.
• If you experience any unexplained false alarms, immediately contact
Brink’s Customer Service.
• If you are going to fumigate your home or do any other work, which will
create a large amount of dust, completely cover all motion detectors and
smoke/heat detectors. (Don’t forget to uncover the smoke detectors and
motion detectors when you are finished.) Excessive smoke from cooking
or the fireplace can also cause a false fire alarm.
• If you know the motion detector is the cause of your false alarms, you
may turn the system on with the motion detector off.To do this, follow the
steps described on page 11 of this manual. Promptly notify Brink’s
Customer Service for further assistance.
• If you get an indoor pet after the alarm system is installed, you should
contactBrink’sCustomerService.Aservice callmayneedtobe scheduled
to adjust the motion detector.
• The motion detector can detect movement of balloons, plants, curtains
and other decorations. Be sure air currents do not cause movement of
these items in the area covered by a motion detector.
1. One Master Control Panel - This device
processes information sent to it by all the other
components of the system. When an alarm is
tripped, the master control panel interprets the
signal and sends a message to the Brink’s
Monitoring Center. This message is sent over
telephonelines.Thispanel also contains abackup
battery incaseyour homeloses power.Youshould
not open the cover to the master control panel
unless instructed to do so by a Brink’s
representative.
2. One Keypad -This keypad is used to turn the
systemon andoffandtouse othersystem options.
It also includes three emergency panic buttons -
police, fire, and medical (See note on page 7.),
which can be used if emergency assistance is
needed.Whenpressed, thepoliceand fire buttons
will cause the siren to sound. When the medical
button is pressed, the keypad beeps, but the siren
does not sound. In all cases, an alarm signal is
senttothe Brink’s Monitoring Center.(Fire buttons
are not available in commercial installations.)
3. Two Door/Window Sensors - These sensors
are placed in or on the frame and body of each
door or window to be protected. If the protected
door or window is opened while the system is on,
an alarm will trip, and an alarm signal will be sent
to the Brink’s Monitoring Center.
4. One Motion Detector - This device is used to
detect motion on the inside of your house. If
someone enters the area covered by the motion
detector while the system is on, an alarm will trip,
and an alarm signal will be sent to the Brink’s
Monitoring Center.
The Brink’s Home Security Standard System
2
5. One Siren - This device sounds a warning
when the alarm system is tripped. The siren is
designedtobe located inside the house to frighten
intruders. It may also sound when using other
special features.
6. OnePowerTransformer-Thisdeviceconnects
the alarm system to the electricity in your home.It
isplugged into aregular (110VAC)electrical outlet.
7. One RJ-Block & Dialer Cable Connection -
This device connects the alarm system to the
phone line in your home.The phone line is used to
send alarm signals to the Brink’s Monitoring
Center.
8. One“Protected byBrink’sHome Security”yard
sign - This high visibility sign warns potential
intruders thatthepremisesisprotected byaBrink’s
security system.
9. Window Stickers - You will be provided with
several “Protected by Brink’s Home Security”
windowstickers.These stickersalsowarn potential
intruders thatthepremisesisprotected byaBrink’s
security system.
Optional Equipment
You may purchase additional keypads, door and/
or window sensors, motion detectors, and sirens
to meet your desired security needs.The following
optional equipment is also available:
1. Smoke/HeatDetector-This deviceisdesigned
to detect smoke and dangerously high heat.
(Not available in commercial installations)
2. HeatSensor -This devicedetects dangerously
high heat. It is designed to be located in attics and
garages or near furnaces.
(Not available in commercial installations.)
3
DESCRIPTION OF THE KEYPAD
DCU-500 Keypad
1. ON Light 7. Emergency Panic Buttons
2. Instant Light Fire
3. Motion Off Light Medical
4. System Ready Light Police
5. Power Light 8. Cancel Alarm Button
6.Trouble Light 9. Motion Detector Off Button
10. ON Button
5
Operating the Brink’s System
NORMAL OPERATION MODE
When the system is turned on, all interior and exterior intrusion sensors
are turned on; allowing time to enter and exit designated doors.
Designated Entry/Exit Doors
Designated entry/exit doors should be only those doors you use most
frequently to enter and exit your home.
Upon entering a designated entry/exit door, the system will sound a tone
from the keypad as a reminder to turn the system OFF. A standard delay
period of 40 seconds allows time to enter a valid user code. If you do not
turn the system off during this delay period, the siren will sound and an
alarm signal will be sent to the Brink’s Monitoring Center. If this happens,
enter your user code, then press CANCEL to silence the siren and cancel
the alarm signal.
When turning the system ON, the system allows a standard delay period of
80 seconds to exit and close a designated door. If you exit and securely
close your door within this delay period, the system will not sound the siren
or send an alarm signal to the Brink’s Monitoring Center. When ON, the
system is ready to detect intrusion in all protected areas.
Turning the System ON
1. Before turning the system ON, close all doors and windows and verify
that the green ready light is on. (If NOT see page 9.)
2. Press ON.
3. The red ON light located on the upper left side of the keypad will begin
to flash, showing the system is ON and the delay period to exit has
begun.
4. Exit promptly (If the red ON light becomes steady, the standard 80-
second delay period has expired.If you open a door now, the alarm will
trip.Turn the system off with your user code and start over.)
6
NOT READY STATUS
1. If the green ready light is not on and you press ON, the pad will sound
multiple tones to alert you that the system cannot be turned on.
2. Push and hold the “7” key for 3 seconds.The keypad lights will light up
exceptthe zoneorzones thatare notsecured.Thensecure theidentified
door, window, or area.
1 = Zone 1 3 = Zone 3 5 = Zone 5
2 = Zone 2 4 = Zone 4 6 = Zone 6
3. Check to see if the green ready light is on.If the green ready light is on,
proceed to turn the system on.
4. If thegreen readylight isstilloff,pressandhold the“1”keyfor3seconds.
5. Enter the zone number that showed not ready in step 2 by pressing the
corresponding number on the keypad. (This procedure “bypasses” the
identified zone.)
6. The green ready light will flash on and off repeatedly while a zone is
bypassed.When the system is turned on then off, all bypassed zones
are restored automatically.
7. You may proceed to turn the system on with the trouble zone bypassed.
CAUTION: THE ZONE YOU BYPASSED WITH THIS PROCEDURE
WILL NOT BE PROTECTED. Please call Brink’s Customer Service at
1-800-445-0872 for assistance.Customer Service is available 24 hours
a day, 7 days a week.
TURNING THE SYSTEM OFF
1. Enter by one of the designated doors. When you open the door, the
system will sound a tone to remind you to turn the system off.
2. Turn the system off by entering your user code. Each key will sound a
short beep when pressed.
3. The red ON light will go out when the system is turned OFF.You must
enter the proper code within the standard 40 second delay period to
prevent sounding an alarm.
7
TURNING SYSTEM OFF AND CANCELING A SOUNDING ALARM
1. Entera validusercode immediatelyfollowedbyCANCELto notify
the Brinks Monitoring Center that the signal is a false alarm.(The
cancel command can also be done in reverse order by pressing
CANCEL then a valid user code.)
2. The keypad will sound a one-second beep to confirm that the
cancellation was successful. You will NOT receive a call from
Brink’s.
NOTE: If you want the Brink’s Monitoring Center to call you
after an alarm has tripped, do not press the CANCEL button.
Simply turn the system off using a valid user code and wait for
the Brink’s Monitoring Center to call. DO NOT CALL BRINK’S.
Calling Brink’s may tie up your phone line, resulting in Brink’s
notifying an emergency agency, which could result in a false
alarmfine.Bepreparedto giveyourcodewordwhentheBrink’s
operator calls. (You select the code word at the time of your
installation, and it is written on your Emergency Information
Schedule.)
TURNING SYSTEM OFF AFTER AN ALARM IN YOUR ABSENCE
1. If an alarm has occurred in your absence the red ON light will be
flashing.
2. Enter a valid user code to turn the system OFF. The keypad will
beep.The zone that sent the alarm will flash for 2 seconds after
the code is entered.
3. Refer to “Viewing Alarm Memory” to review alarms.
4. If you do not know what caused the alarm, call Brink’s Customer
Service at 1-800-445-0872. Customer Service is available 24
hours a day, seven days a week.
8
WHAT TO DO IN AN ACTUAL EMERGENCY
Do
not turn the system off.
1. Do not use the telephone, unless you are calling 911 to report
the emergency; you will not be able to use your telephone until
the system has finished sending the alarm signal to the Brink’s
Monitoring Center.
2. When the Brink’s monitoring operator calls to verify the alarm,
explain the emergency. If you do not answer the phone, Brink’s
will contact the appropriate emergency agency, unless you have
given other instructions.
TURNING SYSTEM ON WITH MOTION DETECTOR OFF
1. To turn thesystemON withouttheMOTIONDETECTORS,press
ON, then MOTION OFF.
2. The motion off light will be on and the red ON light will start
flashing.
TURNING SYSTEM ON WITH DELAY DOORS INSTANT
1. To turn the system ON and make all the doors INSTANT, press
ON, then push and hold the ON button for 3 seconds.
2. The instant light and the red ON light will be lighted.
CAUTION: This feature should only be used whenYOU WILL NOT
BE LEAVING YOUR HOME, BECAUSE YOUR DOORS WILL NOT
HAVE A DELAY PERIOD. If you open any door, the alarm will trip,
and the siren will sound instantly.
TURNING SYSTEM ON WITH MOTION OFF AND DOORS INSTANT
This feature allows you to turn the system on without the motion
detectorand removethedelaytimefrom designated entry/exitdoors.
1. You may combine the above features by pressing ON, MOTION
OFF, then push the ON button and hold it for 3 seconds.
2. The INSTANT, MOTION OFF and the red ON lights will be lit,
confirming the system is ON.
3. You may now move freely within your home without tripping the
alarm. 9
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels BRINKS Système de sécurité
Manuels Système de sécurité populaires d'autres marques
EDM
EDM Solution 6+6 Wireless-AE Manuel utilisateur
Highway Safety Group
Highway Safety Group EA401 Manuel utilisateur
Siren
Siren LED GSM Manuel utilisateur
Detection Systems
Detection Systems 7090i Instructions de montage
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manuel utilisateur
Siemens
Siemens FDM273 Manuel utilisateur