Brink Air 70 Manuel utilisateur

Air 70 (Plus)

WWW.BRINKAIRFORLIFE.NL 614397-D

INSTALLATION INSTRUCTIONS (English)

Heat recovery appliance

Air 70 (Plus)

STORE NEAR THE APPLIANCE

Installation instructions

This appliance may be used by children aged 8 and above, persons with reduced mental capacity, physical limita-

tions or lack of experience and knowledge, provided they are under supervision or have received instructions on

how to use the appliance safely and are aware of the potential hazards.

Children are not allowed to play with the appliance.

Without supervision, cleaning and user maintenance must not be performed by children, persons with reduced

mental capacity, physical limitations or lack of experience and knowledge.

Air 70 Rev. D

Table of contents

1.1

1.2

3.1

3.2

3.3

4.1

4.2

4.3

4.4

5.1

5.2

5.3

5.4

5.5

5.5.1

5.5.2

5.5.3

5.5.4

5.5.5

6.1

6.2

6.3

6.4

6.5

7.1

8.1

8.2

9.1

9.2

10.1

10.2

10.3

10.3.1

10.3.2

10.4

10.5

10.6

10.7

10.8

11.1

12.1

13.1

Delivery......................................................................................................................................................................

Scope of delivery........................................................................................................................................................

Accessories Air 70......................................................................................................................................................

Application................................................................................................................................................................

Version.......................................................................................................................................................................

Technical information..................................................................................................................................................

Dimensions.................................................................................................................................................................

Exploded view appliance............................................................................................................................................

Operation...................................................................................................................................................................

Description..................................................................................................................................................................

Bypass conditions.......................................................................................................................................................

Frost safety.................................................................................................................................................................

Air 70 Plus version......................................................................................................................................................

Installation.................................................................................................................................................................

Installation general .....................................................................................................................................................

Placing the appliance .................................................................................................................................................

Painting output grill front cover...................................................................................................................................

Installation sequence..................................................................................................................................................

Electric connections....................................................................................................................................................

Connecting the power plug.........................................................................................................................................

Connecting the optional multiple switch (only for Plus version)..................................................................................

Connection eBus connector (only for Plus version)....................................................................................................

Connection optional On/Off switch.............................................................................................................................

Connection MODBUS connector (only for Plus version)............................................................................................

Putting into operation..............................................................................................................................................

Powering the or taking the voltage from the appliance...............................................................................................

Switching the appliance on and off.............................................................................................................................

6HWWLQJWKHDLUÀRZUDWH................................................................................................................................................

Reset factory settings.................................................................................................................................................

Other settings installer................................................................................................................................................

Fault...........................................................................................................................................................................

Trouble shooting.........................................................................................................................................................

Maintenance..............................................................................................................................................................

&OHDQLQJ¿OWHUV............................................................................................................................................................

Installer maintenance .................................................................................................................................................

Electric circuit...........................................................................................................................................................

Wiring diagram Basic pcb...........................................................................................................................................

Wiring diagram Plus pcb.............................................................................................................................................

Electric connections accessories...........................................................................................................................

Mounting Plus pcb......................................................................................................................................................

Connecting RH (humidity) sensor (only possible for Plus pcb) ..................................................................................

Connection examples multiple switch.........................................................................................................................

0XOWLSOHVZLWFKZLWK¿OWHULQGLFDWLRQ.............................................................................................................................

:LUHOHVVUHPRWHFRQWUROZLWKRXW¿OWHULQGLFDWLRQ.......................................................................................................

Connecting CO

sensor (only possible for Plus pcb)..................................................................................................

Connecting external switch (only possible for Plus pcb) ............................................................................................

Connecting Brink Home i module (only possible for Plus pcb)...................................................................................

Connecting Air 70 on MODBUS (only possible for Plus pcb).....................................................................................

Linking appliances through eBus (only possible for Plus pcb) ...................................................................................

Incident setting.........................................................................................................................................................

Shutting off air supply an exhaust in case of incidents...............................................................................................

Service ......................................................................................................................................................................

Exploded view ............................................................................................................................................................

Setting values...........................................................................................................................................................

Setting values when using the Brink service tool .......................................................................................................

Declaration of conformity........................................................................................................................................

ErP-values.................................................................................................................................................................

310

Air 70 Rev. D 1

Chapter 1 Delivery

1.1 Scope of delivery

Before starting installation of the heat recovery appliance, check that it has been supplied in complete and undamaged condition.

The scope of delivery of the decentral heat recovery appliance typeAir 70 comprises two assemblies ( 1 - 6) ; the version of assembly

7a - 7f depends on the wall thickness.

The two assemblies consist of the following components:

1 Front cover

2 Interior section Air 70

3 Exchanger/fan combination Air 70

4 Wall sleeve

5 Calamities cap (folded, stowed in appliance)

6 Concise manual + mounting hardware

 D ([WHULRUVHFWLRQ$LUIRUZDOOWKLFNQHVVPP¿QLVK66RUZKLWH

7b ([WHULRUVHFWLRQ$LUZLWKH[WHQVLRQNLWIRUZDOOWKLFNQHVVPP¿QLVK66RUZKLWH

7c ([WHULRUVHFWLRQ$LUZLWKH[WHQVLRQNLWIRUZDOOWKLFNQHVVPP¿QLVK66RUZKLWH

7d Exterior section Air 70 with extension kit for wall thickness 350-400 mm;

   ¿QLVK66RUZKLWH

7e Exterior section Air 70 with extension kit for wall thickness 300-350 mm;

   ¿QLVK66RUZKLWH

7f Exterior section Air 70 with extension kit for wall thickness 270-300 mm;

   ¿QLVK66RUZKLWH

218

168

118

248

2 Air 70 Rev. D

Chapter 1 Delivery

1.2 Accessories

Article description Article code

Plus-pcb 450104

CO2sensor 450101

RH (humidity) sensor 450102

Brink home i module 450103

On/Off switch (internal) 450105

Filter kit F7 (2x G4/ 1 x F7) 450109

ZD\VZLWFKZLWK¿OWHULQGLFDWLRQ 540262

Transmitter wireless remote control 2 positions (with battery) 532170

Transmitter wireless remote control 4 positions (with battery) 532171

Receiver wireless remote control (for battery version) 532172

Kit wireless remote control 2 positions (1 transmitter & 1 receiver) 52173

Kit wireless remote control 4 positions (1 transmitter & 1 receiver) 532174

Brink service tool 531961

Air 70 Rev. D 3

The BrinkAir 70 is a decentral heat recovery ventilation unit for

application in an exterior wall. The maximum ventilation capac-

ity of the appliance is 70 m

/h.

Features Air 70:

 DLUTXDQWLW\DGMXVWDEOHXVLQJFRQWUROEXWWRQV

 ¿OWHULQGLFDWLRQRQWKHDSSOLDQFH

 DIURVWSURWHFWLRQV\VWHPWKDWDOVRDWORZRXWGRRUWHPSHUD-

tures ensures that the appliance's performance remains op-

timal and, if necessary, activates the standard preheater

 ORZVRXQGOHYHO

 FRPHVDVVWDQGDUGZLWKDXWRPDWLFE\SDVVYDOYH

 ORZHQHUJ\FRQVXPSWLRQ

 KLJKHI¿FLHQF\

The performance and the energy consumption of the Air 70

GHSHQGRQWKHDLUTXDQWLW\VHWWLQJDVZHOODVRQWKH¿OWHUIRXOLQJ

The Air 70 is available in two types:

 ³$LU´

Compared to the standard Air 70, the Air 70 Plus has a more

advanced control pcb with additional connection options for,

among others, RH (humidity) sensor, CO

-sensor, multiple

switch or Brink Home i module.

These installation instructions describe both the standard Air

70 and the Air 70 Plus.

Please state the correct type when ordering an appliance.

For dimensions, see §3.2.

TheAir 70 comes ready to plug in with a 230 V mains plug and

a connection for the Brink service tool on the outside of the

appliance.

The appliance comes with an emergency cap. In the event of

an emergency for which the air supply and exhaust to the at-

mosphere must be shut off, the emergency cap must be placed.

7KLVFDSLVVWRUHGLQWKHDSSOLDQFH%HIRUHSODFLQJWKHFDS¿UVW

the appliance must be switched off (pull the mains plug or, if

installed, put the On/Off switch to 0).

See §11.1 for more detailed information.

Always remove this calamity cap before switching the

appliance back on!

Chapter 2 Application

Warning

The preheater and the Control pcb carry 230 V. Always take the voltage from the appliance

by pulling the mains plug when working on the appliance.

4 Air 70 Rev. D

Chapter 3 Version

3.1 Technical information

Air 70

Supply voltage [V/Hz] 230/50

Protection degree Interior section IP20/ Exterior cover IPX4

Dimensions (w x h x d) [mm] See 3.2

Duct diameter through the wall [mm] Ø250

Weight [kg] 12 (13.5 with exterior cover)

Filter class 2 x G4 (exhaust) & 1x G4 (supply)

Fan setting (factory setting) 1 2 3 4 5

Ventilation capacity [m

/h] 1525405570

Rated power [W] 4.2 5.3 8.0 14.0 23.5

Rated current [A] 0.05 0.07 0,10 0.15 0.23

Max. rated current [A] 1,3

&RVĳ 0.34 0.34 0.36 0.40 0.45

3.2 Dimensions

398

355

315

Extension kit 7a - 7f

(for explanation kits see § 1.1) Size Q

[mm]

7a (Wall thickness 500-600 mm) 85

7b (Wall thickness 450-500 mm) 135

7c (Wall thickness 400-450 mm) 185

7d (Wall thickness 350-400 mm) 235

7e (Wall thickness 300-350 mm) 285

7f (Wall thickness 270-300 mm) 315

600 mm

Air 70 Rev. D 5

Chapter 3 Version

1 Front cover

2([KDXVWDLU¿OWHU*XQLWV

3,QGRRUWHPSHUDWXUHVHQVRU

46XSSO\DLU¿OWHU*XQLW

5 Bypass motor

6 Bypass with mounted bypass slide

7 Heat exchanger

8 EPP housing (2 parts)

9 Outdoor temperature sensor

10 PVC Wall sleeve Ø250 mm

11 Mounting plate exterior cover

12 Exterior cover

3.3 Exploded view appliance

13 Maximum safety preheater

14 Preheater

15 Fan

16 Internal condensate discharge

17 &RQWURO EXWWRQV USP FRQWURO ¿OWHUUHVHW VZLWFKLQJ WKH

appliance on and off

18 Service connector

19 LEDs (5x)

20 &RQWUROSFE

21 Mains plug 230 V.

22 3OXVSFERSWLRQ

23 2SWLRQDO2Q2IIVZLWFK

* These parts are not visible in the picture

156 7 810 11 12 13

23 19 16

6 Air 70 Rev. D

The Air 70 is also available as "Plus" version. This version

features a second control pcb with additional connectors (X8

- X19) with more connection options for several applications.

See § 9.2 for more information about the connection options of

the Plus pcb connectors X8 - X15.

The “Plus” print connector is "clicked" directly on the control

pcb.

7KHDSSOLDQFHZLWKRQO\DEDVLFSFEFDQDOVREHDGMXVWHGDIWHU-

wards in a simple manner to a Plus version

Just like the Control pcb connectors, the Plus connectors are

accessible after the front cover has been removed (see §8.1

item 2); then the cover that protects the electronics can be un-

screwed (see §5.4 item 6).

One breakout tab is available at the rear for connecting the plus

pcb with components outside the appliance.

The Plus pcb must always be "signed on" to the Con-

trol pcb, DIP switch 1 must be ON (see §10.1)

Chapter 4 Operation

4.3 Frost safety

To prevent freezing of the heat exchanger at extremely low

outdoor temperatures, the Air 70 features intelligent frost con-

trol. The built-in preheater is activated when the outdoor tem-

perature drops below -1.5°C. That guarantees proper balanced

ventilation at all times.

Only when the outdoor temperature drops so low that the pre-

KHDWHU FDSDFLW\ LV LQVXI¿FLHQW WKH YHQWLODWLRQ FDSDFLW\ LV UH-

duced to protect the exchanger from freezing over.

4.4 Air 70 Plus version.

4.1 Description

The appliance comes plug and play and operates fully auto-

matically. The exhaust air from indoors heats up the fresh,

clean outdoor air. That saves energy while fresh air is supplied

to the dwelling.

7KHFRQWUROV\VWHPKDV¿YHSUHSURJUDPPHGYHQWLODWLRQPRGHV

4.2 Bypass conditions

The appliance features a bypass function. The bypass is in-

tended to lead the cooler outdoor air around the exchanger

during the night after a hot summer's day. That way the cooler

outdoor air directly enters the dwelling. The bypass motor ac-

tivates the bypass slide when the bypass conditions are satis-

¿HG7KHQWKHUHLVRQO\DPHFKDQLFDOH[KDXVWDLUÀRZWKURXJK

the heat exchanger, so that under these conditions -undesired-

heat recovery does not occur.

Bypass conditions

Bypass open - The outdoor temperature is higher than 16°C and

- the outdoor temperature is lower than the indoor temperature in the dwelling and

- the temperature in the dwelling is higher than the bypass temperature (standard setting 22°C)

Bypass closed - The outdoor temperature is lower than 160°C or

- the outdoor temperature is higher than de indoor temperature in the dwelling or

- the temperature from the dwelling is lower than the bypass temperature minus the set hysteresis

temperature; the factory setting for this temperature is 20°C (22.0°C minus 2.0°C).

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Brink Équipement de test

Brink

Brink Pure induct Manuel utilisateur

Manuels Équipement de test populaires d'autres marques

SMART

SMART KANAAD SBT XTREME 3G Series Manuel utilisateur

Agilent Technologies

Agilent Technologies BERT Serial Manuel utilisateur

Agilent Technologies

Agilent Technologies N3280A Manuel utilisateur

Vernier

Vernier Go Direct Voltage Manuel utilisateur

Lifeloc

Lifeloc R.A.D.A.R. Manuel utilisateur

Fluke

Fluke T5-600 Instructions d'utilisation et d'installation

Mercury

Mercury TSL01 Manuel utilisateur

MAHA

MAHA MBT Series Manuel utilisateur

Fuji Electric

Fuji Electric P-61 Manuel utilisateur

ETC

ETC SealerAtor Manuel utilisateur

Skyfine

Skyfine ETHYWAY V2 Manuel utilisateur

Appion

Appion G5 Twin Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuel utilisateur

BW Technologies

BW Technologies MicroDock II Manuel utilisateur

Sun Nuclear

Sun Nuclear 1027 Manuel utilisateur

Biomark

Biomark HPR LITE READER Manuel utilisateur

Hioki

Hioki 3169-20 Manuel utilisateur

Ashcroft

Ashcroft ATE-100 Manuel utilisateur