Brickhouse Security Eon 3.0 Manuel utilisateur
Eon 3.0 GPS Tracker
User’s Guide
What’s Inside
1. Eon 3.0
2. Wall Charger
3. Screwdriver Kit
1. Charging Port
2. LED Light Indicator
3. Built-In Magnetic Mounts
3
1
2
LED Lighting Guide
At initial plugin, the LED will glow blue-green for a few seconds. The LED will
blink red to indicate that the tracker is charging and will blink green when the
device is fully charged. The LED blinks blue to indicate that the device has
received GPS signal and blinks green indicating that the device is connecting to
the cellular network.
Getting Started
The rst step in using your Eon 3.0 GPS Tracker is to charge it for 24-48 hours
by plugging it in using the included wall adapter. To access the USB charging
socket, unscrew the two screws holding down the waterproong ap with the
included screwdriver. Once the device has been fully charged, unplug the device
from the charger, and reattach the waterproof ap.
You should have received an email containing your default login information
before the device arrived. Make sure that the above steps are taken before trying
to log in and begin tracking.
Take the device out for a 20-30 minute drive; this will help the device calibrate to
the platform. The Eon 3.0 is motion activated only and will track once a minute
when it senses motion for an extended period.
Placing Your Device
The Placement of the Eon 3.0 is important and dependant on the type of object
you’re tracking.
The device will always give the most
accurate location data when it has a
clear view of the sky. It is capable of
transmitting and receiving through
materials like glass, plastic, and
cloth, but it’s not able to transmit
through metals or concrete; keep
this in mind when placing the
device. Avoid placing the device in
the trunk of a vehicle. The Eon 3.0
also may not report from a glove
compartment or underneath a seat. *Place in green zones for best results.
This interference can vary from vehicle to vehicle, so we recommend trying
dierent locations on your particular vehicle and seeing which placement yields
the most accurate reporting.
If you’re looking to track covertly, the device is weather resistant and contains
built-in magnets. When placing the device beneath a vehicle, be sure that the
BHS sticker is facing down, towards the ground, and that it is as near the edge
of the vehicle as possible.
If you are tracking an asset such as a large container, you will need to mount the
device with the magnets facing down towards the metal surface and the sticker
facing the sky.
Tracking Your Device
To track your Eon 3.0, enter www.BrickhouseSecurity.com in your browser
window. Hover your cursor over the Login tab on the top right of the website
and click on GPS. Enter your login information and press the Login button. The
tracking page will appear, and the device’s last reported location will be centered
on the map. If you have multiple devices on your account, the rst 3 that were
registered will be automatically selected and appear on the map.
Navigation Arrows Change Map View
Zoom Bar Dashboard Last Known Location
Along the bottom of your screen will be your dashboard.
Tracking information is displayed using Google Earth Maps, so navigation is
similar to what most people have grown used to in using internet-based mapping
solutions. You can use the Navigation arrows and Zoom Bar to move around the
map, or drag the map using your mouse and zoom using a click-wheel mouse.
At the bottom of the pop-up window are the Zoom, Street View, and Live Tracker
buttons.
• Zoom will perform the same task as using the Zoom bar on the left side of the
map; zooming in on the icon you have selected.
• Street View will open up a separate window displaying Google’s Street View,
if available.
The BrickHouse shield icon will appear where a tracker transmitted most
recently. Click on an icon to bring up a pop-up box. This will show your tracker’s
name, the distance it has traveled on this trip, what direction it was moving
in, speed, battery information, and start and stop locations. Start will display
the beginning location of the current trip, and the time it was recorded. Stop
will display the most recent location from the device, as well as the time it was
reported.
The More tab is not currently active. Future updates to the platform will utilize
this tab.
The GeoFence tab allows you to create quick geofences, based on the location
you are currently viewing and route the device was following. Use the Circular
GeoFence radio button to create a perimeter around the location you are
clicked on. Use the Route GeoFence radio button to create a boundary that
will follow the entire trip your device was on.
Give the GeoFence a name in the GeoFence Name window, and add a short
description in the Description box (optional).
Use the Action dropdown box to choose if you would like an alert created
when the device enters the chosen area, exits the area, or both. Use the Radius
box to choose how large the area will be. You can enter values below a mile
as decimals. For example: A half-mile radius geofence would be entered as .5.
Table des matières
Autres manuels Brickhouse Security GPS
Brickhouse Security
Brickhouse Security Trackport 4 Manuel utilisateur
Brickhouse Security
Brickhouse Security Livewire 4 Manuel utilisateur
Brickhouse Security
Brickhouse Security Spark Nano 6.0 Manuel utilisateur
Brickhouse Security
Brickhouse Security LiveWire VOLT Manuel utilisateur
Brickhouse Security
Brickhouse Security Livewire Manuel utilisateur
Brickhouse Security
Brickhouse Security EON4 Manuel utilisateur
Brickhouse Security
Brickhouse Security Spark Nano 6 Manuel utilisateur
