Brew Express BE-110 Manuel utilisateur
BREW EXPRESS®
INSTALLATION GUIDE
model # BE-104 & BE-110
Note - BE-104R shown in illustrations.
IMPORTANT NOTE:
For more information see our instructional video online at www.BrewExpress.com.
Do not return this product to place of purchase without authorization.
For return authorization or service call 866.268.5953
CONTENTS
1. Safety 1 - 2
2. Getting Started 3
3. Hardware/Tools 4
4. Specification and Requirements 5-6
5. Location (area of Installation) 7
6. Water Installation 8
7. Power Installation 9
8. Brewer Installation 10 - 14
9. Testing 15
1
SAFETY
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including the following:
1. Read all Instructions.
2. Do not touch hot surfaces. Use handles or knobs.
3. The voltage and frequency of the supply connections should conform to those of the rating label.
4. Close supervision is necessary when any appliance is used by or near children.
5. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
6. Do not operate any appliance after the appliance malfunctions or has been damaged in any manner.
Call Brew Express and discuss problem with customer service.
7.Theuseofaccessoryattachmentsnotrecommendedbytheappliancemanufacturermayresultinre,
electric shock or injury to persons.
8. Do not use outdoors.
9.Checkspecicationsonpage5forproperwaterpressurerequirementsofthisproduct.
10. Do not place on or near a hot gas or electric burner, or in a heated oven.
11. The appliance should be installed in a place not easily reached by children.
12. Do not use appliance for other than intended use.
13. To reduce the risk of shock, discontinue use of the appliance if water leakage occurs.
14. To reduce the risk of electric shock, do not mount over a sink.
15.Toreducetheriskofre,donotplaceanyheatingorcookingappliancebeneaththeappliance.
16.Toreducetheriskofre,donotmountunitoverornearanyportionofaheatingorcookingappliance.
17.Toreducetheriskofre,donotstoreanythingdirectlyontopoftheappliancesurfacewhentheappliance
is in operation.
SAVE THESE INSTRUCTIONS
IMPORTANT:
Read and follow instructions carefully before installing your BREW EXPRESS in-the-wall
COFFEE SYSTEM.
FOR BEST RESULTS, IT IS ADVISED THAT YOU HIRE A QUALIFIED PROFESSIONAL.
Always turn off all power at main electrical panel before attempting to install BREW EXPRESS.
Improper electrical wiring could cause a fire hazard. All wiring MUST be performed in accordance with
local electrical codes. Installation must be performed by a qualified electrician, or equivalent.
Always turn off water supply at source when installing BREW EXPRESS. Improper installation of water supply
could cause poor performance or leaks which may lead to dry rot and cause structure damage to building.
Be certain water supply is leak free. Hire a qualified plumber if necessary.
The BREW EXPRESS dispenses extremely hot water. Hot liquids may cause severe burns if it contacts skin.
Use extreme caution when handling hot liquids dispensed by the BREW EXPRESS. KEEP HANDS AWAY
FROM SPRAY HEAD, BREW BASKET, CARAFE OR MUG DURING BREW CYCLE. This product is intended
for brewing hot water for beverages only and may not be used in any other way.
Check distance between wall cavity studs and check for obstacles inside the wall to ensure BREW EXPRESS
will fit in desired location. Normal cavity is 14.5” wide and 4” deep. Hire a qualified professional if necessary.
2
SAFETY
3
GETTING STARTED
IMPORTANT:
Read and follow instructions carefully before installing your BREW EXPRESS in-the-wall
COFFEE SYSTEM. For best results, it is advised that you hire a qualified professional.
Getting Started
1. Carefully unpack BREW EXPRESS from gift box.
2. Remove carafe and brew basket from brewing unit. If brewer
includes carafe lock, press on lever to remove carafe.
3. Remove hardware kit from inside brew basket.
4. Remove mounting screws from behind carafe and
brew basket. The top mounting screw holds the carafe
lock bracket.
5. Separate brewer from Rough-In-Box by holding the
Rough-In-Box with one hand, and pulling the brewer
withtheotherhand(seegurebelow).
4
HARDWARE/TOOLS
HARDWARE
BREW EXPRESS comes supplied with the following items to ensure a successful installation.
Check to be certain all items have been included with your brewer.
• (1)Brewer(withshortwaterlineattachedtoconnectwithincomingwaterline)
• (1)Rough-in-Box
• (1)Carafeandlid
• (2)BrewBaskets(1basketstyle,1conestyle)
• (1)InstallationGuide
• (1)OperationGuide
• (1)Template(forcuttingholeforRough-in-Box)
• (1)HardwareKit:(locatedinbrewbasket)
(6)Sheetrockscrewsformountingrough-in-box.
(3)Wirenuts
(1)MaleQuickConnector(forconnectionbetweenCoffeeSystemUnitandRough-in-Box)
TOOLS REQUIRED
The following tools are required for installation:
• TapeMeasure
• UtilityKnife
• PhillipsScrewDriver
• Pencil
• WireStripper
• StudFinder
• Pliers
• Level
PARTS REQUIRED (notsupplied)
• Strainrelief(Romexwireclamp)
• 12 - 2wire(perlocalcode)
• 1/4”Polyorcopperline(refrigeratoricemakerkit)
continuous length recommended.
• CaulkingGun
• SiliconeCaulk
• SafetyGlasses
• ACPowerSensor
• CrescentWrench
• ReciprocatingSaw(optional)
• TileCuttingBit(optional)
• Electricdrillanddrillbits
• Waterlter
• WireNuts
• ValveConnection(optional)
9 7/8"
249.8mm
11 3/4"
299.6mm
2 1/2"
63.5 mm
1"
24.3mm
9 7/8"
251.7mm
5 1/8"
130.8mm
8 3/8"
213.5 mm
3 7/8"
99.0 mm
3/4"
18.3 mm
8 1/2"
216.70 mm
10 1/8"
254.90 mm
AREA ON WALL
TO BE CUT
(USE TEMPLATE)
BE-104 SPECIFICATIONS: (SpecsfortheBE-110areonpage6)
Read and follow instructions carefully before installing your BREW EXPRESS in-the-wall
COFFEE SYSTEM. For best results, it is advised that you hire a qualified professional.
1. Overall Dimensions(FinishedUnitwithRough-in-Box)approximately9.9”x11.8”(seebelow).
2. Dimensions for Rough-in-Box(MountingStructure)approximately8.5”x10.1”x4”.
3. Electrical Requirements120VAC,60HZ.(1400watts).
4. Water Requirements1/4”ODwatersupplyline(copperorpoly)minimum30psitoamaximumof90psi.
PotableCOLDwaterisrequired.
NOTE: Ifwaterisnotavailable,analternatewaterdispenserjug(5gallons)canbeusedwiththe
optionalpumpaccessory(notsupplied).ContactBrewExpressformoreinformation.
Please Note: A filter is reqired for all hard water sources and recommended for regular standard soft water.
A shut off valve at water source is recommended. The filter, such as an ice maker type filter, can easily be
installed at the source. If water lines are not purged or clear of debris or a filter is NOT installed, foreign
particles (debris) in water may clog brewer system causing failure, and will void all warranties.
SPECIFICATIONS AND REQUIREMENTS
5
BE-110 SPECIFICATIONS: (SpecsfortheBE-104areonpage5)
Read and follow instructions carefully before installing your BREW EXPRESS in-the-wall
COFFEE SYSTEM. For best results, it is advised that you hire a qualified professional.
1. Overall Dimensions(FinishedUnitwithRough-in-Box)approximately121/4”X133/8”(seebelow).
2. Dimensions for Rough-in-Box(MountingStructure)approximately11.5”X11.5”.
3. Electrical Requirements120VAC,60HZ.(1400watts).
4. Water Requirements1/4”ODwatersupplyline(copperorpoly)minimum30psitoamaximumof
90psi.PotableCOLDwaterisrequired.
NOTE:Ifwaterisnotavailable,analternatewaterdispenserjug(5gallons)canbeusedwiththe
optionalpumpaccessory(notsupplied).ContactBrewExpressformoreinformation.
Please Note: A filter is reqired for all hard water sources and recommended for regular standard soft water.
A shut off valve at water source is recommended. The filter, such as an ice maker type filter, can easily be
installed at the source. If water lines are not purged or clear of debris or a filter is NOT installed, foreign
particles (debris) in water may clog brewer system causing failure, and will void all warranties.
SPECIFICATIONS AND REQUIREMENTS
6
7
LOCATION (Area of Installation)
The BREW EXPRESS can be installed in most places where power and water are supplied. If only power is available,
youmayconsiderusingawaterbottleandpump.Themostcommonlocationsarethekitchen,masterbathroomorofce.
Installation inside an exterior wall is not recommended due to risk of water freezing. See warranty section for
additional information.
NOTE: It is important to check stud width and location for proper fit. Please use template provided for proper fit
for your location.
IDEAL LOCATION AREAS
A. On Counter
B. Full Height Back Splash C. Above Back Splash
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Brew Express Cafetière
Brew Express
Brew Express BEC-110 Manuel utilisateur
Brew Express
Brew Express BE-112 Manuel utilisateur
Brew Express
Brew Express BE-104 Manuel utilisateur
Brew Express
Brew Express BE-104 Manuel utilisateur
Brew Express
Brew Express BE-112 Manuel utilisateur
Brew Express
Brew Express BEC-110 Manuel utilisateur
