Breo iDream1168 Manuel utilisateur
USER
MANUAL
iDream1168
HEAD MASSAGER
OBM Distribution / Breo-USA
5678 East Concours Avenue
Ontario, California 91764
http://www.breo-usa.com
Thank you for purchasing
BREO iDream1168.
Please read this manual carefully before using
the product, and keep it in a safe place for future
reference.
Introduction
Inside the Package
Function Deployment
Operation
Precautions
Troubleshooting
3
3
4
6
Preparation 5
7 -- 8
9
Contents
2
Technical Parameters 9
3
Inside the Package
Introduction
iDream1168 adopts air pressure, vibration, and hot compress massaging
technology. It relaxes the ocular region by rubbing and vibration massag-
ing the pressure points around it. This product allows you to enjoy wonder-
ful music while massaging, further relaxing your brain.
Main Unit，Controller，AC Adapter，Batteries，User Manual，Earphones.
Controller
Main Unit
f
AC Adapter Batteries（AA x 4pcs）User Manual Earphones
1168
Function Deployment
4
Main Unit
Controller
1. Tightness Adjusting Knob
2. Size Adjusting Knob
3. Hindbrain massage heads
4. Front part of Main unit
On/Off, Mode Button
LCD Screen
(Clockwise: Music / Vibration
/ Heat / Air pressure / Time)
Operating Buttons
A .
B .
C .
(Clockwise: Music / Vibration
/ Heat / Air pressure / Time;
Center button: Mode, ON/OFF)
Earphone JackD .
DC Power Port
Pressure Reduction Valve
E .
F.
D E
B
A
C
F
1
2
3
4
5
Preparation
No damage on connection between controller and main unit
Battery power is sufficient
No damage on AC adapter
b.
a.
1 . Batteries
c.
Prior to use, check the integrity of the machine and accessories:
Power Options
a. Open the battery cover on the back of the controller.
b. Install 4 AA batteries in accordance with the positive and negative poles.
c. Close the battery cover. (picture1)
Wear
Use the side dials to adjust the distance between head to estab-
lish the most comfortable fit, and wear main unit. (picture3a)For
ease and safety, use BOTH hands in adjusting the tightness on
each side as well as in setting the distance above head.
(picture3b)
a. Insert the plug of AC adapter in the controller’s DC port.
b. Connect the other end to AC power socket. (picture2)
2 . AC Adapter
（picture1）
（picture2）
（picture3a）（picture3b）
* Choose power option #1 OR #2.
6
Operation
Manual Mode
Tip: When you feel the air pressure is too much and/or uncomfortable, press the
Pressure Reduction Valve on the controller to release air.
Preset default is air pressure + high-temperature hot compress +
vibration + relaxing music, 15 minutes duration.
Manually operate related function buttons to switch among music,
time, vibration, hot compress, and air pressure modes.
(*Sounds of Nature featured: running water, birds chirping, waves,
crickets, water dripping)
Power on - Press and hold Button
Time: Press Button to select massage duration (5 min / 10 min / 15 min)
Music: Press Button to select music type (Relaxing / Nature)
Press and hold Button to STOP the music
Vibration: Press Button to initiate 4 vibration modes (circulates automatically)
Heat: Press Button to select temperature (Low-High)
Air pressure: Press Button to initiate 4 air pressure modes (circulates automatically)
Mode: Press to select from 4 different modes:
Air pressure + Hot compress
Air pressure + Vibration
Hot compress + Vibration
Air pressure + Hot compress + Vibration
Power off - Press and hold Button again.
7
Precautions
Please read the manual carefully and operate accordingly.
Children under 7 years old cannot use the massager.
This massager should not be used by people who suffer from a brain
disease, have had brain surgery, or have a physical or mental disorder.
Put on/wear the unit first BEFORE turning the power on.
Do not use while walking or driving.
Keep the massager away from humidity, heat, and/or corrosive gas.
If the massager will not be used for a long time, remove the batteries
to avoid battery leakage.
This massager is designed as a personal care product. It is not for
diagnosis/treatment of any health disorder, nor meant for commercial use.
To clean, wipe with aseptic cotton and alcohol. Do not wash or
immerse in water.
This product is not a substitute for healthcare professionals' advice
and treatment. In case of doubt or if necessary, please consult your
healthcare professional.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Please note that changes or modifications not expressly approved
by the party responsible for compliance could void the user’s
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
12.
11.
8
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio ommunications. However, there is no
guarantee that interference will not occur in a will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception,which can be determined
by turning the equipment off and on,the user is encouraged to try to
correct the interference by one or more of the following measures:
13.
Troubleshooting &
Technical Parameters
When operational problems occur, please refer to the chart below.
Do not disassemble the machine or try to repair it by yourself.
Technical Parameters
Power supply：
Ideal environment：
Dimension ：
Net Weight：
Power：
DC: 6V
Temperature: 5°C - 40°C
Relative humidity: ：≤80%
Atmospheric Pressure: 5-400hpa
Main Unit: 233mm X 269mm X 245mm
Controller: 158mm X 68mm X 43mm
882g
6W
ProblemPossible Reason Possible Solution
Power-ON failure
Cable is broken / in bad
condition
Check the condition of the cable
Batteries are low / out
Change batteries
Batteries are not installed
correctly
Check if positive/negative poles of batteries
are positioned right
Make sure the batteries are snug in place.
AC adapter is not connected
properly
Check the connection of the AC adapter to
the power socket .
Weak heat or air
pressure
Batteries are low / out Change batteries
Make sure the batteries are installed
correctly and snug in place
9
Table des matières
Autres manuels Breo masseur
Breo
Breo iDream1260 Manuel utilisateur
Breo
Breo 15193130 Manuel utilisateur
Breo
Breo iNeck2 Manuel utilisateur
Breo
Breo iScalp Manuel utilisateur
Breo
Breo i Neck air 2 Manuel utilisateur
Breo
Breo iNeck Manuel utilisateur
Breo
Breo NP1 air Manuel utilisateur
Breo
Breo FM D191 Manuel utilisateur
Breo
Breo i See K Manuel utilisateur
Breo
Breo iDream3 Manuel utilisateur
Breo
Breo iSee M Manuel utilisateur
Breo
Breo iSee310 Manuel utilisateur
Breo
Breo i Neck air 2 Manuel utilisateur
Breo
Breo iDream3S Manuel utilisateur
Breo
Breo iSee370 Manuel utilisateur
Breo
Breo iSee360 Manuel utilisateur
Breo
Breo iPalm520 Manuel utilisateur
Breo
Breo INOW1180 Manuel utilisateur
Breo
Breo iDream 5 Manuel utilisateur
Breo
Breo Neck N5 mini Manuel utilisateur
