LABOUR SAFETY - WARNINGS
Every person to work with or service the hammer must
read or be familiarized with these instructions so as
to understand them completely.
Always wear safety shoes, goggles, ear defenders, gloves
and other safety equipment prescribed for the given task.
WARNING Noise and vibrations hazard
Prolonged exposure to noise and vibrations produced by
hammer operation puts the operator at risk of health issues.
Do not stay in a noisy environment without effective ear
defenders.
WARNING Electricity
The design of the product does not provide protection from
electric shock hazard.
WARNING Dust hazard
Operation may be accompanied by high dust nuisance.
The product has been designed and constructed to
comply with EN 1127-2+A1 and CLC/TR 60079-32-1
standards on use in locations of dangerous atmospheric
conditions 2, category M2, group I (mines).
The construction of the product complies with
requirements of Directive 98/37/EC of the European
Parliament and of the Council, as amended by technical
regulation –Government Regulation No. 24/2003 Coll., as
amended, requirements of harmonized technical
standards EN ISO 12100, standards on group I (mines),
category M2 machinery in accordance with Directive
94/9/EC of the European Parliament and of the Council,
as amended by technical regulation –Government
Regulation No. 23/2003 Coll., as amended, and
harmonized technical standards EN 13 463-1, and
conforms to standards on use in „dangerous atmospheric
conditions 2“ in compliance with EN 1127-2+A1 to the
extent limited by national regulation - CBU Decree No.
22/1989 Coll., § 232, section (1) c) of up to 1,5% methane
concentration.
Source of the supplied compressed air must be stationed
in a nonhazardous area.
