BRC DPG1K Manuel utilisateur
BRC DPG CONTROLLER USER GUIDE
DESK CONTROL APP PLACEMENT & MOUNTING RESET DPG1B/C OPERATION DPG OPERATION PRODUCT MAP
Page 12 of 56
Desk Control™ Apps
• Up and down drive (if supported by the
connected product)
• Displays actual height
• Displays error codes and links to LINAK
website support
• Up to 4 memory positions
• Reminder notifications when to stand up
• Possibility to enable automatic drive on memory
positions (if supported by the connected product)
• Works via Bluetooth® Low Energy Technology
• Available in English, German, French, Spanish,
Italian, Korean, Chinese and Japanese
DPG1K
• Up/down drive
Products
DPG1M
• Up/down drive
• 2 memory positions
• LED diode reminder
• Bluetooth®
DPG1B
• Up/down drive
• 2 memory positions
• Light strip reminder
• Bluetooth®
DPG1C
• Up/down drive
• 4 memory positions
• Light strip reminder
• Bluetooth®
• Display
BRC DPG CONTROLLER USER GUIDE
DESK CONTROL APP PLACEMENT & MOUNTING RESET DPG1B/C OPERATION DPG OPERATION PRODUCT MAP
Page 13 of 56
Operation of the DPG series:
The Desk Panel is operated by tilting; Tilt and hold the DPG up to make the desk drive up, press and hold the
DPG down to make the desk drive down. Release the DPG when you have reached your requested position.
Figure 1: Tilt and hold the DPG1K to make the desk drive up
Figure 2: Press and hold the DPG1K to make the desk drive down
BRC DPG CONTROLLER USER GUIDE
DESK CONTROL APP PLACEMENT & MOUNTING RESET DPG1B/C OPERATION DPG OPERATION PRODUCT MAP
Page 19 of 56
Operation of the DPG1B/C
The Desk Panel is operated by tilting; Tilt and hold the DPG up to make the desk drive up, press and hold the
DPG down to make the desk drive down. Release the DPG, when you have reached your requested position.
Figure 1: Tilt and hold the DPG to make the desk drive up
Figure 2: Press and hold the DPG to make the desk drive down
BRC DPG CONTROLLER USER GUIDE
DESK CONTROL APP PLACEMENT & MOUNTING RESET DPG1B/C OPERATION DPG OPERATION PRODUCT MAP
Page 20 of 56
Storing the memory positions
DPG1B:
Memory positions
The DPG1B has a “store memory” button to the right symbolised with a star.
Adjust the desk to a preferred position and press the “Star”-button for 2 seconds. The light strip will now flash
white two times to indicate that saving the position is in progress. When the light strip becomes static white,
the position is saved. If the user adjusts the desk to another position and saves the position, it will overwrite the
memory position closest to the current position.
DPG1C:
Memory positions 1 and 2
The DPG1C has a “store memory” button to the right symbolised with a star.
Adjust the desk to a preferred position and press the “Star”-button for 2 seconds. The light strip will now flash
white two times to indicate that saving the position is in progress. When the light strip becomes static white, the
position has been saved. The display will indicate the saved position with a star and a number of the position. The
number inside the star indicates the order according to which the positions are saved; First position saved; A star
with a “1” inside. This is how to save 2 memory positions “1” and “2”. If the user adjusts the desk to another
position and saves the position, it will overwrite the memory position 1 or 2 closest to the current position.
Memory positions 3 and 4
The DPG1C features 4 memory positions. Pressing the “Star” shortly will make the display show the 4 memory
positions: A “star” with the number next to it. Now the user can toggle through these 4 memory positions in
the display and choose which one to save the current position as. E.g. a user wants to store the current position
as memory 3: Press the “star”-button and toggle to the “star” with “3” next to it. Now use the same storing
procedure as described above: Press the star for 2 seconds and the memory position is saved.
BRC DPG CONTROLLER USER GUIDE
DESK CONTROL APP PLACEMENT & MOUNTING RESET DPG1B/C OPERATION DPG OPERATION PRODUCT MAP
Page 21 of 56
Driving to memory positions
After storing the memory positions, the positions can be reached simply by tilting the DPG. Tilt and hold - when
a stored position is reached, the desk stops. This way the user can easily change between sitting and standing
position without looking at the DPG in the meantime. While driving the display in the DPG1C will show the
height of the desk. When a position is reached, this will be indicated in the display by the star and the memory
number.
The DPG will stop at all stored memory positions, which means up to 4 different positions (in DPG1C) during the
stroke length of the desk. When the desk stops at a memory position, the user can continue to tilt the DPG for 1
second and the desk will move past the memory position and continue in the direction of the tilt. Furthermore,
when the desk stops at a memory position, the user can release the DPG and tilt again immediately to move
past a memory position.
Driving to memory positions
(Automatic drive enabled via the Desk Control™ App, only possible for “Full version”)
After storing the memory positions, the positions can be reached simply by tilting the DPG. Double tab on the
DPG to let the desk adjust automatically to the first position in the direction of the double tap. Simply tab the
DPG again to stop the driving of the desk.
Figure 3: Double tap to adjust the desk to a memory position automatically
BRC DPG CONTROLLER USER GUIDE
DESK CONTROL APP PLACEMENT & MOUNTING RESET DPG1B/C OPERATION DPG OPERATION PRODUCT MAP
Page 22 of 56
Erase memory positions
Pressing the “Memory” button for 8 seconds will erase all saved memory positions. The light strip will blink red
to indicate when the action is completed.
Connecting Bluetooth®
Pressing the Bluetooth® button in the middle for 2 seconds will enable pairing mode.
A blue flashing light in the light strip indicates this.
Download the Desk Control™ App suited for your device in App store or Google Play
and pair the app and the device. Search for Desk Control and look for the app icon:
The display on the DPG1C will inform about the Bluetooth-ID of the desk, which is “DESK” followed by a 4-digit
number – look for this ID in the list of “Desks nearby”.
BRC DPG CONTROLLER USER GUIDE
DESK CONTROL APP PLACEMENT & MOUNTING RESET DPG1B/C OPERATION DPG OPERATION PRODUCT MAP
Page 23 of 56
Reminder
Setting the reminder interval
The DPG has a “Reminder” button to the left symbolised with a bell. Pressing this button will adjust the interval
of how often to get reminders to change position. Each white block represents an interval and the 3 standards
are:
- Interval 1: Reminder after 55 minutes sitting
- Interval 2: Reminder after 50 minutes sitting
- Interval 3: Reminder after 45 minutes sitting
The default interval chosen is reminding after 55 mins, which means one white block will be lit up. Simply toggle
through the intervals by pressing the bell button. When no white blocks are lit up, the reminder is turned off.
Through the apps, it is possible to personalise the three intervals to custom values.
Interval 1: Reminder after 55 minutes sitting Interval 2: Reminder after 50 minutes sitting
Interval 3: Reminder after 45 minutes sitting Reminder off
Reminder reset
It is possible to reset the reminder to default values by pressing the “bell” symbol for 8 seconds. The light strip
will flash red to indicate when the action is completed.
BRC DPG CONTROLLER USER GUIDE
DESK CONTROL APP PLACEMENT & MOUNTING RESET DPG1B/C OPERATION DPG OPERATION PRODUCT MAP
Page 24 of 56
Light strip reminder
The light strip is a thin line of LED light shining through the surface of the DPG. The light strip is intended to
indicate the status of the desk user. The status depends on the reminder interval chosen. When the user is in
position in an appropriate amount of time according to the interval, the light strip calmly pulsates green. When
the sitting interval runs out, the calm pulsating green turns into fast pulsating orange for 1 min hereafter static
orange – this is an indication to the user to adjust the desk to standing height. In standing height, the light strip
will pulsate green until a potential timeout. When the desk is adjusted back to sitting position, the light strip will
pulsate green until the reminder goes off again.
After 4 hours without any action, the light strip will time out. When the DPG is tilted, the green light will come
back on.
Please be aware; When the light strip is enabled for reminders, the DPG is no longer in ZEROTM mode as
long as the light is on/active.
Figure 4: Pulsating green light strip indicates that everything is okay
Figure 5: Pulsating orange light strip indicates that the user needs to change position
BRC DPG CONTROLLER USER GUIDE
DESK CONTROL APP PLACEMENT & MOUNTING RESET DPG1B/C OPERATION DPG OPERATION PRODUCT MAP
Page 25 of 56
Factory reset
Pressing and holding the “Memory” and “Reminder” for 8 seconds will set the DPG to factory default. The LED
will flash red 3 times. If a factory reset is performed, it sets the DPG back to the configured state. That means all
configurations made in the DPG configurator will not be reset – only the settings changed directly on the DPG or
in the App by the end-user will be deleted.
Error codes in CBD6S Cause
E53-E64 COLLISION
E41-E52 OVERLOAD
E01 INITIALISATION
DPG1C
Display
The DPG1C has an OLED display, which shows the height during drive of the desk and many other texts to guide
the user.
Adjust the initial height of the desk
If the height shown in the display is not correct the height can be adjusted. When pressing the “Reminder” and
the “Bluetooth” button on the DPG1C at the same time in 5 seconds; the height in the display starts to blink.
When tilting the DPG1C the height in the display changes without moving the desk. Tilt up to increase the
height, tilt down to decrease the shown height in the display. Pressing any button will confirm the choice or wait
for 10 seconds and the confirmation happens automatically.
Switching between centimetre and inch
Pressing the “Memory” and the “Bluetooth” button on the DPG1C at the same time for 5 seconds; the current
measurement unit blinks. When e.g. CM is blinking and the user wants to change to inch; Tilt the DPG once and
it now says “Inch” in the display. Pressing any button will confirm the choice or wait for 10 seconds and the
confirmation happens automatically.
Error codes
The DPG1C shows error codes in case of errors in the system. The most common errors loop between the error
code (EXX) and the cause, check the code below:
BRC DPG CONTROLLER USER GUIDE
DESK CONTROL APP PLACEMENT & MOUNTING RESET DPG1B/C OPERATION DPG OPERATION PRODUCT MAP
Page 26 of 56
Placement of the DPG1K:
The drawings below are side views examples on
how to position the DPG1K according to the edge
of the tabletop.
Drawing No.: DRW0001
Drawing No.: DRW0001
Placement of the DPG1M:
The drawings below are side views examples on
how to position the DPG1M according to the edge
of the tabletop.
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels BRC Contrôleurs
