
3
WARNINGS & SAFETY INFORMATION
• The installation of DC power sources in a boat must be handled by a qualified
electrician
• Make sure to connect power to the suitable voltage socket
• No electrical devices are to be used inside the product
• The product can be powered on only after being unpacked and put on a flat level
surface for over 6 hours
• Operation angle: As there is water inside, please keep the ice maker on flat surface
when in operation.
• Product must be well ventilated. Ensure there is a minimum of 200mm clearance at
the back, and 100mm around the sides
• The product should be in a well-ventilated space, away from heat sources.
• Try to avoid direct exposure to sunlight
• Keep product stable
• When there is water inside the tank, do not turn the product upside down to empty.
Dry the water, do not soak in water
• Do not put metal in the air inlet vent, outlet vent, or gap
• Do not connect with power except 12/24VDC, or the 240VAC to 12VDC power adapter
(optional)
• Do not soak the product in water or wash with water
• The product should not be repaired. If there is any issues please consult the place of
purchase
• Turn o the product before cleaning to avoid electric shocks or other issues
• Keep product away from wet or humid places
WARNING: The manufacturer is not responsible for any potential injury from misuse
BEFORE FIRST USE
Prior to using your product, please read all the safety and operating instructions
thoroughly. Please ensure you follow the steps below before using the product. We
recommend you keep the original packaging for storing the product when not in use.
Please pay close attention to the section entitled Warnings & Safety Information. Find
a safe and convenient place to keep this instruction manual for future reference.
Unpack the product but retain all packaging materials until you are satisfied that your
new product is undamaged and in working order. Ensure you have all accessories
listed in this manual.