Boxis RS700 Manuel utilisateur
www.boxisautoshred.com
Model# RS700
A Revolution in Productivity
Our innovative paper feeder mechanism grabs documents
one at a time from the middle and shreds them into
unreadable microcut particles.
The Boxis™ AutoShred™ automates large shred jobs. It
only takes seconds to load and start – destroys a full load in
approximately 10-12 minutes – you no longer need to stand
there while the paper is being shredded. Just place up to
700 sheets of letter size loose leaf paper into the lockable
paper tray, press start and walk away…and let the Boxis™
AutoShred™ do the work!
The Boxis™ AutoShred™ reduces a letter size sheet into over
1000 unreadable particles.
3-Year Limited Product Warranty
Covers workmanship and product defect(s), including parts
and labor. If unit cannot be repaired, manufacturer will replace
with a new unit or comparable unit, at manufacturer’s sole
discretion. Does NOT cover any repair due to normal wear
and tear.
Customer Support:
866-707-1854
support@boxisautoshred.com
1
Warnings .....................................................................................................................................2
Specifications..............................................................................................................................3
Installation...................................................................................................................................4
Safety Instructions ......................................................................................................................4
Shredder Diagram......................................................................................................................5
General Operation Instructions........................................................................................... 6 - 8
Secure Shredding Instructions...................................................................................................9
LCD Panel Guide..............................................................................................................10 - 11
Maintenance............................................................................................................................ 12
Warranty, Registration & Contact Info................................................................................... 13
Table of Contents
See product demo video at:
www.boxisautoshred.com
2
WARNINGS
CAUTION: KEEP THIS DEVICE AWAY FROM CHILDREN AND PETS!
Place the paper shredder in an area less accessible to children.
DO NOT PLACE FINGERS TOO CLOSE TO THE FEED SLOT AS
SERIOUS INJURY MAY OCCUR. Paper shredders can pull children’s
fingers into the shredder mechanism.
AVOID GETTING LOOSE CLOTHING OR JEWELRY NEAR THE
FEED SLOT.
AVOID GETTING HAIR NEAR THE FEED SLOT.
NEVER spray any aerosol-based products in or around the shredder.
NEVER use any petroleum based or flammable oils or lubricants in or
around the machine, as some oils can combust causing serious injury.
Lubricants specifically designed for shredders are acceptable.
DO NOT SHRED CREDIT CARDS.
DO NOT SHRED CD/DVD DISCS.
DO NOT SHRED BINDER CLIPS OR PAPER CLIPS.
To reduce premature wear and tear of the rollers, whenever possible
remove paper clips and staples from paper before shredding.
NEVER place the shredder near water or any heat source.
Avoid direct contact with water.
STOP USE IMMEDIATELY IF:
1. The shredder motor makes loud and/or irregular noises
during operation.
2. Smoke or a burning odor becomes present.
Continuing to operate your shredder with any of the above
conditions present could be potentially dangerous.
! !
3
Technical Specifications
Model...................................................................................................................................RS700
Cutting Style..................................................................................................................Micro-Cut
Shred Size ................................................................................................0.1” x 0.7” (3 x 20mm)
DIN Security Level..............................................................................................................Level 3
Sheet Capacity ............................................................................................ 700 sheet Autofeed
6-Sheet Manual Feed
Shred Speed............................................................................................22.6 ft/min (6.9 m/min)
Intake Throat Width............................................................................................... 9.4” (240mm)
Motor Power..................................................................................................................... 0.67 HP
Voltage ........................................................................................................................120V/60Hz
Dimensions (L x W x H)............................................. 21.5” x 17” x 36” (545 x 430 x 915mm)
Weight......................................................................................................................117 lb (53 kg)
Receptacle Volume...................................................................................... 21 gallons (80 liters)
Noise Level .................................................................................................. <58 dB (Ultra Quiet)
The Boxis™AutoShred™RS700
4
Installation
• Refertoset-upinstructionsprintedoncartonboxforproperassembly.
•Onlyoperatethisproductfromthetypeofpowersourceindicatedonthe
markinglabel.Ifyouarenotsureofthetypeofpoweravailable,consultan
electrician.
•Makesuretheelectricaloutletiseasilyaccessiblefromtheshredder.
•Shreddermustbeoperatedonlyinuprightposition.
•Tomakesuretheshredderhasproperventilation,placeitaminimum
distanceof5cm(2inches)fromthewallorfurniture.
Safety Instructions
1.
Readandfollowallinstructionsbeforeuse.Savetheseinstructionsforlateruse.
2. Alwaysturnoffandunplugthemachinebeforemoving,servicing,cleaning,
oranythingotherthannormaloperation.Seriousinjurymayresult.Clean
shredderwithadampcloth,usingamildsoapandwatersolution.
3. Donotuseabrasivesorpetroleum-basedcleaners.
4. Placethisproductascloseaspossibletopowersourceforquickandeasy
unplugging.
5. Turnoffthepowerswitchbeforeremovingwastebin.Itisadvisableto
disconnectthepowercordbeforeopeningtheshredder.
6. Thisproductshouldneverbeplacedneararadiatororotherheatsource.
7. Donotallowanythingtorestonthepowercord.Donotplacethepower
cordwherepeoplemaywalkontheit.
8. Ifanextensioncordisusedwiththisproduct,makesurethetotalofthe
ampere(amps)ratingsontheproductspluggedintotheextensioncorddo
notexceedtheextensioncord’sampererating.
9. Donotattempttoservicethisproductyourself,asinopeningorremoving
coversmayexposeyoutorisksofgettinginjured.Also,doingthiswillvoid
thewarrantyoftheshredder.
10. Unplugthisproductandcontacttechnicalsupportwhen:
•Thepowercordorplugisdamagedorfrayed.
•Liquidhasbeenspilledontheproduct.
•Theproducthasbeenexposedtorain.
•Theproductdoesnotoperatenormallyevenwhentheoperating
instructionsarefollowed.
•Theproducthasbeendropped,orthecasinghasbeendamaged.
11. Regularlyemptythewastebinsothatthewasteoutputisnotimpeded.
5
Diagram
LCDPanel
ManualStop
Button
Start
Button
Keypad
(Forsecuritycode)
Manual
Forward&
Reverse
Buttons
Manual
Lock&
Unlock
Buttons
Lubricate
Reset
Button
Power
Switch
PaperTray
Doors ManualFeed
Slot
Control
Panel
Ventilation
Handles
Heavy-Duty
Locking
Casters
Handlesfor
PaperTray
Doors
Cabinet
Access
Door
Contentsinsidecabinet:
•WasteBin
•KeyforManualUnlock
•UserQuickGuides
•UserManual
•LubricationSheets
•WasteBinLiners
ManualUnlock
(onrightsideofshredder)
6
Read instructions completely before operating shredder.
Connect power cord to the power socket at the backside of the machine.
Connect the power cord to any standard 120V AC, 60Hz outlet.
Install waste bin
• Open cabinet door and remove remove waste bin from the cabinet.
• Place plastic waste liner around the basket (2 waste liners included).
Allow bag edges to overhang.
• Slide the waste bin into the cabinet and shut the cabinet door.
• Store this operation manual in slot inside cabinet door.
Switching “ON”
• Toggle the power switch ON.
• The LCD panel indicates machine
is ready for shredding operation.
Operation
Note: The display indication
is always shown for unlocked
paper tray doors.
Load and Shred
Open doors
Place up to the maximum number of
sheets of paper into the paper tray.
Close doors
Press “START” button.
When the shred job is complete, the machine will automatically stop.
7
Operation (cont’d)
To manually feed paper (max. 6 sheets) or lubricant sheets.
• The shredding process is initiated by photo sensors in the
paper feed opening. Insert a maximum of 6 sheets of paper
into the paper feed opening; shredding begins automatically.
When shredding is complete, the cutting system
automatically stops after approximately 3 seconds.
• For maintenance, shredder lubricant sheets should be fed
in the paper feed opening as well.
To clear paper jam.
• If paper jam occurs press and hold the “Reverse” button to
back paper out of the paper entry. Try pulling gently on the
paper to remove it from the shredder. Alternate between
forward and reverse, as needed, until the jam clears.
• On LCD, REVERSE will be displayed.
8
AUTO Mode
• The master power switch is located on the top right side of
the cabinet. When switch is toggled ON, the LCD
shows AUTO and the machine enters into AUTO mode.
• In the AUTO mode, the shredder is ready to shred paper
either by auto or manual feed.
START Mode
• Press the “Start” button and the machine starts shredding
paper loaded in paper tray. The LCD shows AUTO with
paper feeding.
STOP Mode
• Press the “Stop” button to interrupt the shred job. The LCD
displays flashing STOP.
REVERSE Mode (In AUTO Mode)
• Pressing the “Reverse” button during AUTO Mode
operation will initiate the manual REVERSE function.
The LCD shows REVERSE. Press and hold the “Reverse”
button in order to keep the motor running in reverse. When
the “Reverse” button is released, the machine returns to
AUTO mode and the display will show AUTO.
REVERSE Mode (In STOP Mode)
• When pressing the “Reverse” button during STOP Mode,
the LCD shows REVERSE and the motor enters the REVERSE
mode. Press and hold the “Reverse” button in order to keep
the motor running in reverse. When the “Reverse” button is
released, the machine returns to STOP Mode and the LCD
displays flashing STOP.
NOTE: Manual reverse function will not work unless tray doors
are closed.
Operation (cont’d)
Table des matières
Autres manuels Boxis destructeur de papier
Manuels destructeur de papier populaires d'autres marques
Swingline
Swingline STACK-AND-SHRED200X&200XL 60X Mode d’emploi
GBC
GBC ShredMaster CC055 Manuel utilisateur
UNITED OFFICE
UNITED OFFICE UAV 190 A1 Manuel utilisateur
UNITED OFFICE
UNITED OFFICE UAV 190 A1 Manuel utilisateur
Rexel
Rexel Optimum AutoFeed+ 45X Manuel utilisateur
Martin Yale
Martin Yale 227284S1 Manuel utilisateur
