Botech BT-100 HD Manuel utilisateur

BT-100 HD

HD(High Definition)

Common Interface Embedded

Satellite Receiver

User Manual

TABLE OF CONTENTS

Notice 3

Safety Information 4

1 Before You Begin 6

1.1 Features 6

1.2 Accessories 7

2 Controls and Functions 8

2.1 Front Panel 8

2.2 Rear Panel 8

2.3 Remote Control Unit 9

3. Connections 11

3.1 Connecting to TV 11

3.2 Connecting to Dish 15

4. Menu Overview 17

4.1 Menu Instruction 17

4.2 Menu Help 17

4.3 Menu Structure 18

5. Menu Operation 19

5.1 First Installation 19

5.2 Installation 21

5.3 System Setting 26

5.4 Channel 28

5.5 Advanced 30

5.6 Status 31

6. Viewing General Information 31

6.1 Banner Information 31

6.2 TV & Radio changing 32

6.3 TV or Radio Channel Lists 33

6.4 Option 37

6.5 A/V+ 38

6.6 Fav 39

6.7 A-Z 39

6.8 EPG 40

Additional Information 42

1.1 Programming the Remote Control to Operate Other Devices 42

1.2 Key Table 44

1.3 Brand List 46

A.1 Troubleshooting 56

A.2 Technical Specifications 57

A.3 Glossary of Terms 59

Notice

Read this manual carefully and make sure you understand the provided instructions. For your

safety, check what the result each action will be.

Warnings, Cautions and Notes

Throughout he whole manual, pay special attention to the following marks that indicate hazardous

situations.

Caution

Indicates a situation which, if not avoided, could damage the

equipment or apparatus.

Warnings

Indicates a hazardous situation which, if not avoided, could result in

serious injury.

Note

Indicates additional information to the user to make the user aware of

possible problems and information of any importance to help the user

to understand, to use and to maintain the installation.

Safety Information

This digital satellite receiver has been manufactured to comply with international safety standards.

Please read the following safety precautions carefully.

Safety Instructions and Precautions

Avoid placing heavy things and blocking ventilation passage.

(Passage blocking can cause fire)

Avoid scrubbing the surface with Benzene or Volatile gasoline. Color

can be damaged.

Leave the power and the antenna off for the ling absence or during

thunder storm.

Avoid dropping and damaging Remote Control Unit.

If there is smoke or burning smell, turn off & un-plug the set

immediately. Contact your local repair center for advice.

Avoid place the set on slippery and slant surface.

Keep away from the water.

Clear off the dust. Dust or Metallic particles inside the set can cause

fire and electric shock.

Avoid dissembling and assembling. Do not open the set.

Do not snatch the cable to plug out.

Do not move the set while power cord is plugged in.

Keep the distance from Magnetic items and Audio Speaker.

Place the set with the good ventilation and away from the direct

sunlight and humidity.

Avoid the temperature of over 30C and below 5C.

1 Before You Begin

1.1 Features

·Brilliant On Screen Graphic

·MPEG-2 & MPEG-4 Fully DVB Compliant

·MPEG-2 Video (MP@ML), MPEG-1 Audio Layer1,Layer2

·LNB Controlling Logic

·SCPC/MCPC Receivable from C / Ku-Band Satellites

·Digital Tuner with Loop-through

·HDMI, Component, RGB/HV, S-Video, Composite Video, Audio L/R

·Wide Symbol Rate 1~45Mbps & Frequency Input 950 ~ 2150MHz

·DiSEqC 1.2 Supported

·S/PDIF AC3 Audio

·User friendly OSD Menu with Full Function

·256 Color Graphic User Interface

·Multi-language menu

·4-digit 7-segment LED Display

·Variable Aspect Ratio (4.3, 16:9) with Pan Vector or Letter Box

·EPG(Electronic Program Guide) for On-screen Channel Information

·Teletext and Subtitle Supported (VBI & OSD)

·Installation by Easy Setup Guide

·Capacity for Storing Multi Channel (FTA.2500 Channels, 500 Transponders)

·Favorite Channel and Parental Lock Function

·RS232C Port for Upgrading System Software

·Input Frequency 51~862 Mhz

·Implement complet DVB-T (ETS 300 744) standard

·2K and 8K transmission modes

·No=Hierarchial and Hierarchial support

·Optimized for both SFN and MFN enviroment

1.2 Accessories

·Component video cable

·HDMI cable

·Operating instruction (this Manual)

·Remote Control

·AAA dry cell batteries x 2

2 Controls and Functions

2.1 Front Panel

Item Description

1. Power Button Turns the receiver On/Off.

2Menu/OK Button Shows the Main menu in viewing mode. Activates the highlighted menu

item in menu mode.

3. EXIT Button Exit from the current menu or cancels the current progressing

operation if applicable.

4. CH Up/Down Buttons

(▲/▼)

Changes channels in viewing mode and moves the cursor up/down in

menu mode.

5. Volume Up/Down Buttons

(/)

Increases/ decreases the volume levels in viewing mode and changes

settings in menu mode.

7. Display

(4-digit 7-segment)

4-digit display of channel information.

The red LED is the STAND BY indicator.

2.2 Rear Panel

Table des matières

Autres manuels Botech Récepteur

Botech

Botech CA9500IR Manuel utilisateur

Botech

Botech BC 9700 XUSB Manuel utilisateur

Manuels Récepteur populaires d'autres marques

Garmin

Garmin GA 23 Manuel utilisateur

Aiphone

Aiphone PS-12F Manuel utilisateur

IMES

IMES TCS-01CA-PMI Manuel utilisateur

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuel

AMIMON

AMIMON AMN12310 WHDI Manuel utilisateur

Dual

Dual DMCPA79BT Mode d'emploi

Sound Associates

Sound Associates SA652P Manuel utilisateur

Sherwood

Sherwood NewCastle R-772 Manuel utilisateur

Audio

Audio A10-RX Series Manuel utilisateur

AllSee

AllSee PushShare PSRV1.1 Manuel utilisateur

DEMAG

DEMAG DRC-DR D2 Manuel utilisateur

Teleco

Teleco TVRCL868A02 Manuel utilisateur

Bosch

Bosch RF3222E Manuel utilisateur

Kramer

Kramer 631R Manuel utilisateur

Xpress

Xpress xmc10 Manuel utilisateur

JVC

JVC KD-MR1BTS Manuel utilisateur

Omega Engineering

Omega Engineering UWTC-REC3 Manuel utilisateur

e-survey

e-survey E300 Pro Manuel utilisateur