Bosonic PCD-80 Manuel utilisateur

ENG-2

Safety Precautions

PCD-80

Instruction Manual

Portable CD Radio

Read all instructions carefully before using the unit and keep them for further reference.

Retain the manual. If you pass the unit onto a third party make sure to include this manual.

Check that the voltage marked on the rating label matches your mains voltage.

Damage

Please inspect the unit for damage after unpacking.

Do not continued to operate the unit if you are in any doubt about it working normally, or if it is damaged in

any way - switch off, withdraw the mains plug and consult your dealer.

Location of Unit

The unit must be placed on the flat stable surface and should not be subjected to vibrations.

Do not place the unit on sloped or unstable surfaces as the unit may fall off ir tip over.

The mains socket must be located near the unit and should be easily accessible.

Temperature

Avoid extreme degrees of temperature, either hot or cold. Place the unit well away from heat sources

such as radiators or gas/electric fires.

Avoid exposure to direct sunlight and other sources of heat.

Naked Flames

Never place any type of candle or naked flame on the top of or near the unit.

Moisture

To reduce the risk of fire, electric shock or product damage, do not expose this unit to rain, moisture,

dripping or splashing. No objects filled with liquids, such as vases, should be placed on the unit.

If you spill any liquid into the unit, it can cause serious damage. Switch it off at the mains immediately.

Withdraw the mains plug and consult your dealer.

Ventilation

To prevent the risk of electric shock or fire hazard due to overheating, ensure that curtains and other

materials do not obstruct the ventilation vents.

Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure the

unit is well ventilated.

Safety

Always disconnect the unit from the mains supply before connecting/disconnecting other devices or

moving the unit.

Unplug the unit from the mains socket during a lightning storm.

Mains Cable

Make sure the unit or unit stand is not resting on top of the mains cable, as the weight of the unit may

damage the mains cable and create a safety hazard.

If the mains cable is damaged it must be replaced by the manufacturer, its service agent, or similarly

qualified persons in order to avoid a hazard.

Interference

Do not place the unit on or near appliances which may cause electromagnetic interference. If you do it, it

may adversely affect the operating performance of the unit, and cause a distorted picture or sound.

Batteries

Batteries used in the unit are easily swallowed by young children and this is dangerous.

Keep loose batteries away from young children and make sure that the battery holder tray is secure in the

unit. Seek medical advice if you believe a cell has been swallowed.

Please dispose of batteries correctly by following the guidance in this manual.

ENG-1

ENG-2 ENG-4

ENG-3

Safety Precautions Product Overview

Front view

1. Speakers

2. LCD Display

3. FM Stereo Indicator

4. Repeat

5. Next

CD: skips tracks forward.

6. Play/Pause

CD: start or pauses CD playback.

7. CD Door

8. Stop

CD: stops CD playback or delete a program.

9. Back

CD: skips tracks backward.

10. Program

11. Handle

12. Volume Control

13. Function Selector

- select CD, OFF, AM and FM ST..

14. AC IN Jack

- connect AC power cord to the mains socket.

15. Earphones Jack

16. Battery Compartment

17. Telescopic Antenna

18. Tuning Knob

- adjust the AM or FM radio station.

B. Voltage Selector (110V or 220V)

Earphones

Listening to loud sounds for prolonged periods of time may permanently damage your hearing.

Before putting on earphones, turn the volume down then put the earphones on and slowly increase the

volume until you reach a comfortable listening level.

Supervision

Children should supervised to ensure that they do not play with the unit and the remote control.

Never let anymore especially children push anything into the holes, slots or any other openings in the

case - this could result in a fatal electric shock.

Service

To reduce the risk of electric shock, do not remove screws, The unit does not contain any user-

serviceable parts. Please leave all maintenance work to qualified personnel.

Maintenance

Ensure to unplug the unit from the mains socket before cleaning.

Do not use any type of abrasive pad or abrasive cleaning solutions as these may damage the unit’s

surface.

Do not use liquids to clean the unit.

Class 1 Laser Product

This unit utilises a laser. Use of controls, adjustments or performance of

procedures other than those specified herein may result in hazardous

radiation exposure.

Before removing the unit, ensure the disc tray is empty.

Always remove the disc when the unit is not in use.

Failure to do so will risk severely damaging the disc and the unit.

Do not stack devices, heat from other devices may affect the performance of

the unit.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to

alert the user to the presence of uninsulated “dangerous voltage” within the unit’s

enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the

presence of important operating and maintenance (servicing) instructions in the manual

accompanying the unit.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CLASS 1

LASER PRODUCT

Owner’s record

For your convenience, record the model number and serial number for future reference.

Model no.:___________________________________ Serial no.:____________________________________

Top view

Rear view

PH O N E S

ENG-5 ENG-6

Power Supply

Connect AC power

Caution:

Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the

rating label located on back or bottom of the unit.

Warning:

Risk of electric shock! When you disconnect the AC power, always pull the plug from the wall outlet.

Note: Install the unit near the wall outlet and where the AC power plug can be easily reached.

1. Connect the power cord to the AC IN jack on the unit and to the wall outlet.

2. To save energy: After use, set the switch to OFF.

Install batteries (not included)

Note: You can use both batteries and AC power as power supply of this unit.

Batteries are not supplied with the accessories.

1. Open the battery compartment.

2. Insert 8 x UM-2 batteries with correct polarity (+/-) as indicated.

3. Close the battery compartment.

Handling the batteries

Install the batteries correctly by following the polarity (+ and -) indications in the battery compartment.

Never use batteries that show signs of electrolyte leaks or cracking.

Never dispose of used batteries in an open fire.

Keep batteries out of reach of children.

Never recharge disposable batteries.

Never short circuit battery terminals.

Always remove used batteries from the appliance case.

Do not try to open the batteries.

Do not mix up different kind of batteries or new and already used batteries together.

Only use batteries of the recommended or equivalent type.

Remove batteries from the unit before disposing of it at the end of its service life.

Do not dispose of the end of the used batteries as domestic waste. Dispose of them in accordance with

local regulations.

Note:

When replacing the batteries, make sure you dispose of the old batteries in accordance with applicable

regulations. They should be disposed of in a location specifically designated for that purpose so they can

be recycled safely and without posing any risk for the environment. Do not burn or bury them.

General Operation

1. To switch on and select your operation source, adjust the Function Selector to CD or RADIO.

2. Adjust the sound with the Volume Control.

3. To switch off the unit, adjust the Function Selector to OFF.

Note: To avoid unnecessary energy consumption, always adjust the Function Selector to OFF after using

the unit.

Radio Reception

1. Adjust the Function Selector to AM or FM ST..

2. Turn the Tuning Knob to tune to a station.

Note: The FM stereo indicator comes on if the band selector is set on FM stereo and you have tuned the

radio to an FM stereo station.

Helpful hints:

To improve FM reception, you can extend, incline or turn the telescopic antenna for best reception.

To improve AM reception, turn the unit to face a different direction.

Using earphones

Turn down the volume before connecting the earphones. Slowly raise the volume with the earphones on

until you reach your desired volume. When earphones are connected, the speaker is automatically

disabled.

Note: Avoid listening to sound at excessive levels which could be harmful to your ears. At full power, the

prolonged listening can damage the ears of the user.

ENG-7 ENG-8

CD Operation

You can play commercially available audio CDs including CD-R and CD-RW.

Note:

·Even if this portable radio-CD player is able to read CD-R and CD-RW discs, in addition to conventional

compact discs, it is not possible to offer a 100% guarantee that all CD-R/RW discs can be read; playback

depends on the quality and condition of the blank discs that you use, among other things. A playback

failure does not necessarily indicate that the unit is malfunctioning.

·You cannot play CDs encoded with copyright protection technologies.

Play a CD

1. Adjust the Function Selector to CD.

2. To open the CD door, raise it by the corner marked OPEN/CLOSE.

3. Insert a CD with the printed side facing up.

·The total number of tracks in the disc will display.

·If no disc or CD door is not closed, display shows “- -”.

4. To start playback, press the Play/Pause button.

5. To pause/resume play, press the Play/Pause button.

6. To stop play, press the Stop button.

7. To skip a track, press the Back or Next buttons.

8. To search within a track, press and hold the Back or Next buttons.

Release the button to resume normal play.

Play options

Adjust volume level

1. During play, turn Volume Control to increase/decrease the volume level.

Select play modes

1. Press the Repeat button repeatedly to select a play mode:

·repeat: repeat the single track.

·repeat all: repeat the whole disc.

2. To return to normal play, press the Repeat button repeatedly until play mode icons are no longer

displayed.

Program play sequence

You may store up to 20 tracks in desired sequence. Be sure to press the Stop button before use to ensure

no prior program has been set.

1. In stop mode, press the Program button to activate programming.

· “PROGRAM” and “00” indicator will flash on the display.

2. Press the Back or Next buttons to select your desired track number.

3. Press the Program button to store the desired track number.

4. Repeat steps 2-3 to select additional tracks into program memory.

· When the memory is full, “PROGRAM” and “- -” will flash on the display.

5. To play your program, press the Play/Pause button in stop mode.

· The “PROGRAM” indicator will flash.

6. To review the program, press the Program button to

display your stored tracks in stop mode.

7. To erase a program, press the Stop button in stop mode or by

opening the CD door.

· The “PROGRAM” indicator will disappear.

Total t rack

PRO GRA M

REP EAT RE PEAT ALL

REPE AT 1 à REPE AT ALL à NOR MA L PL AYB ACK

Maintenance

Clean the cabinet

Use a soft slightly moistened with a mild detergent solution. Do not use a solution containing alcohol,

spirits, ammonia or abrasives.

Clean discs

When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the centre out.

Do not use solvents such as benzene, thinner, commercially available cleaners, or antistatic spray

intended for analogue records.

Clean the disc lens

After prolonged use, dirt or dust may accumulate at the disc lens. To ensure good play quality, clean the

disc lens with camera lens brush or any commercially available cleaners. Follow the instructions supplied

with cleaner.

ENG-9 ENG-10

Troubleshooting

Environmental information

All unnecessary packaging materials has been omitted. The packaging can be easily separated into three

materials: cardboard, polystyrene and plastic.

Your set consists of materials which can be recycled if disassembled by a specialized company. Please

observe the local regulations regarding the disposal of packaging, dead batteries and old equipment.

If a fault occurs, first check the points listed below before taking the set for repair.

If you are unable to remedy a problem by following hints, consult your dealer or service center.

Note: Do not open the unit as there is a risk of electric shock. Under no circumstances should you try to

repair the set yourself; as this will invalidate the guarantee.

No power

·Ensure that the power cord is connect securely.

·Ensure that there is power at the AC Mains.

·Ensure that the batteries are inserted correctly.

No sound or poor sound

·Adjust the volume.

No response from the unit

·Disconnect and reconnect the AC power cord, then turn on the unit again.

·Electrostatic discharge, re-connect the AC power cord after a few seconds.

No disc detected

·Insert a disc.

·Check if the disc is inserted upside down.

·Wait until the moisture condensation at the lens has cleared.

·Replace or clean the disc.

·Use a finalized CD or correct format disc.

The CD skips tracks

·Ensure that the CD is not damaged or dirty.

·Ensure that program mode is deactivated.

Poor radio reception

·Increase the distance between the unit and your TV or any home appliance.

·Fully extend the telescopic antenna.

Specifications

(The technical characteristics are liable to change without notice)

Power Supply

Power Consumption

Dimensions

Weight

Frequency Range

Output Power (RMS)

Speakers

Earphones Jack

Mains: AC 110/220V ~ 60/50Hz

Battery: DC 12V(8 x UM-2 batteries, not included)

: 14W

: 233(L) x 209(W) x 129(H) mm

: 1.33 kg

: AM 530-1710KHz

: FM 88-108MHz

: 2 x 1.2W

: 8 Ohms

: 3.5mm

Recycle

This symbol bears the selective sorting symbol for waste electrical and electronic

equipment (WEEE). This means that this product must be handled pursuant to

European Directive 2002/96/EC in order to be recycled or dismantled to minimize its

impact on the environment. It should be disposed at the end of its life separately from

your household waste. There are separate collection systems for recycling in the EU.

For more information, please contact the local authority or your retailer where you

purchased the product.

Electronic products not included in the selective sorting process are potentially

dangerous for the environment and human health due to the presence of hazardous

substances.

This mark is applied to show the equipment conforms to European safety and

electromagnetic compatibility standards.

Notes for battery disposal

The batteries used with this product contain chemicals that are harmful to the environment. To

prevent our environment, dispose of used batteries according to your local laws or regulations.

Do not dispose of batteries with normal household waste.

For more information, please contact the local authority or your retailer where you purchased the

product.

Table des matières

Manuels Radio populaires d'autres marques

EisSound

EisSound KBSound iSelect Manuel utilisateur

Midland

Midland 1001LWX Manuel utilisateur

Konig

Konig HAV-SR41 Manuel utilisateur

Roberts

Roberts exprssion Manuel utilisateur

VDigi

VDigi DD3.0 Manuel utilisateur

Radio Shack

Radio Shack 21-1863 Manuel utilisateur

Roberts

Roberts Stream 207 Manuel utilisateur

Sony

Sony Walkman SRF-M97 Manuel utilisateur

Stanley

Stanley FatMax FMC770 Manuel utilisateur

auna

auna DAB-Radio 10026947 Manuel utilisateur

SOUNDMASTER

SOUNDMASTER UR190 Manuel utilisateur

HYT

HYT TC-320 Manuel utilisateur

auna multimedia

auna multimedia Yellowstone 10026851 Manuel utilisateur

B-Tech

B-Tech GMRS-V2 Manuel utilisateur

Weierwei

Weierwei VEV-V8 Manuel utilisateur

SOUNDMASTER

SOUNDMASTER DAB750 Manuel utilisateur

Telefunken

Telefunken TF-1505 Manuel utilisateur

Makita

Makita LXRM03 Manuel utilisateur