Boser HS-6011L Manuel utilisateur

HS-6011

Pentium

-II-III-Celeron



BX L/VGA LAN

•PICMG Bus Full Size•All-in-one•CRT/Panel•RS-232/422/485•

•DMA33•WDT•DOC•USB•IrDA•LAN•PC/104•CTA•

•100MHz Bus•Pentium®-II-III-CeleronCPU at Face-Side•

HS-6011V

Pentium

-II-III-Celeron



BX L/VGA

•PICMG Bus Full Size•All-in-one•CRT/Panel•RS-232/422/485•

•DMA33•WDT•DOC•USB•IrDA•PC/104•CTA•

•100MHz Bus•Pentium®-II-III-CeleronCPU at Face-Side•

HS-6011L

Pentium

-II-III-Celeron



BX LAN

•PICMG Bus Full Size•All-in-one•RS-232/422/485•

•DMA33•WDT•DOC•USB•IrDA•LAN•PC/104•CTA•

•100MHz Bus•Pentium®-II-III-CeleronCPU at Face-Side•

HS-6011P

Pentium

-II-III-Celeron



BX ISB

•PICMG Bus Full Size•All-in-one•RS-232/422/485•

•DMA33•WDT•DOC•USB•IrDA•PC/104•CTA•

•100MHz Bus•Pentium®-II-III-CeleronCPU at Face-Side•

Copyrights

This manual is copyrighted and all rights are reserved. It is not allow any non

authorization in copied, photocopied, translated or reproduced to any electronic or

machine readable form in whole or in part without prior written consent from the

manufacturer.

In general, the manufacturer will not be liable for any direct, indirect, special,

incidental or consequential damages arising from the use of inability to use the

product or documentation, even if advised of the possibility of such damages.

The manufacturer keeps the rights in the subject to change the contents of this

manual without prior notices in order to improve the function design, performance,

quality and reliability. The author assumes no responsibility for any errors or

omissions, which may appear in this manual, nor does it make a commitment to

update the information contained herein.

Trademarks

BOSER is registered trademark of BOSER Technology Co., Ltd.

ISB is registered trademark of BOSER Technology Co., Ltd.

Intel is a registered trademark of Intel Corporation.

Award is a registered trademark of Award International Inc.

All other trademarks, products and or product's name mentioned herein are

mentioned for identification purposes only, and may be trademarks and/or registered

trademarks of their respective companies or owners.

User Manual edition 1.7, Aug.24 2001

Contents •i

Contents

HS-6011 ......................................................................................................1

HS-6011V....................................................................................................1

HS-6011L ....................................................................................................1

HS-6011P....................................................................................................1

GENERAL INFORMATION .............................................................................3

1.1 MAJOR FEATURES .....................................................................................4

1.2 SPECIFICATIONS.........................................................................................5

1.3 DELIVERY PACKAGE...................................................................................7

HARDWARE INSTALLATION ........................................................................8

2.1 CAUTION OF STATIC ELECTRICITY.............................................................8

2.2 CAUTION ON UNPACKING AND BEFORE INSTALLATION .............................9

2.3 HS-6011’S LAYOUT.................................................................................10

2.4 QUICK LISTING OF JUMPERS ...................................................................11

2.5 QUICK LISTING OF CONNECTORS ............................................................12

2.6 JUMPER SETTING DESCRIPTION..............................................................13

2.7 SETTING THE BUS-CLOCK FREQUENCY ..................................................14

2.8 FREQUENCY MULTIPLIER SETTING..........................................................15

2.9 SETTING THE RTC CONFIGURATION.......................................................16

2.10 SYSTEM MEMORY DRAM .....................................................................16

2.11 ATX/AT POWER SELECT ......................................................................16

2.12 WATCH-DOG TIMER...............................................................................17

2.13 PCI VGA CONTROLLER ........................................................................19

2.14 DISKONCHIPADDRESS SETTING.......................................................19

2.15 LCD 3.3/5.0V POWER SELECT.............................................................20

2.16 MANUFACTURER’S DEFAULT SETTING ..................................................20

2.17 TEMPERATURE ALARM ..........................................................................20

2.18 RETENTION MECHANISM .......................................................................21

CONNECTION .................................................................................................22

3.1 POWER AND FAN CONNECTORS ............................................................22

3.2 IDE'S LED, KEY-LOCK AND RESET BUTTON ..........................................23

3.3 EXTRA SPEAKER CONNECTOR ................................................................24

3.4 PCI E-IDE DRIVE CONNECTOR ..............................................................25

3.5 PS/2 POWER ON/OFF CONTROL ..........................................................27

ii •Contents

3.6 PARALLEL PORT CONNECTOR.................................................................27

3.7 THE FLOPPY DISK DRIVE CONNECTOR ...................................................28

3.8 SERIAL PORTS CONNECTORS .................................................................29

3.9 KEYBOARD CONNECTORS .......................................................................31

3.10 PS/2 MOUSE 6-PIN MINI-DIN CONNECTOR .........................................31

3.11 VGA-CRT CONNECTOR .......................................................................32

3.12 FLAT-PANEL CONNECTOR .....................................................................33

3.13 IR CONNECTOR .....................................................................................35

3.14 USB PORT CONNECTOR.......................................................................35

3.15 PC/104 BUS CONNECTION ...................................................................36

3.16 FAST ETHERNET CONNECTOR ..............................................................38

3.17 ATX POWER CONTROLLER CONNECTOR .............................................39

AWARD BIOS SETUP....................................................................................40

4.1 MAIN MENU ..............................................................................................41

4.2 STANDARD CMOS SETUP.......................................................................42

4.3 BIOS FEATURES SETUP..........................................................................43

4.4 CHIPSET FEATURES SETUP .....................................................................44

4.5 INTEGRATED PERIPHERALS .....................................................................45

4.6 POWER MANAGEMENT SETUP.................................................................46

Chapter-1

General Information

The HS-6011 is a bus-100MHz Intel®BX chipset design PICMG bus

Pentium®II-III-CeleronIndustrial Single Board (I.S.B.) CPU card with features

combine together to make it an ideal all-in-one industrial single board computer,

enhanced I/O effects with VGA interface supports LCD Display panel and CRT

Monitor on-board.

The HS-6011 also provides one set of PC/104 bus for 8/16-bit industrial

application with based on PC/104 standard bus.

With onboard DMA33 of mode 4 to IDE drive interface architecture, the HS-6011

supports with maximum 33.3 MB/sec in data transfer rating to 4 pieces IDE drive

connection. Design with Intel®82443BX and 82371EB core logic chipset, the

HS-6011 supports all series Pentium®II-III-Celeronoperating at 233 ~ 650MHz.

The on-board C&T®69000 VGA chipset supports up to 1280 x 1024 256 colors

display resolution with on-chip 2MBytes memory, and it provides both VGA CRT

Monitor and LCD Panel display connection.

The advanced PICMG bus add-on connection of HS-6011 allows user could

easily obtain both ISA's 16-bit and PCI's 32-bit full set signals from a full size

PICMG slot for suitable plug into system with 8/16/32-bit ISA and-or PCI slots

operating. The HS-6011 provides with two pieces 168-pin DIMM sockets support

up to 1.0GBytes of main system memory.

A single Flash chip holds the system BIOS, and you can easy update the Flash

BIOS by the Utility Update. Advanced USB and IR ports also provide for faster

and easily in data transmission. You can also use the DOS version of the

"DiskOnChip" socket by issuing commands from the DOS prompt without the

necessity of other software supports up to 144MB.

If a non-expect program cause halts, the onboard WDT Watch-Dog Timer will

automatically reset the CPU or generate an interrupt. The watchdog is designed

with hardware only and doesn’t need any arithmetical functions of a real-time

clock chip. This ensures the reliability in an unmanned or standalone system.

1.1 Major Features

 One axial-horizontal type Slot-1 socket at face-side for Intel®

Pentium®II-III-Celeron233〜650 MHz Processors.

 Intel®82443 BX chipset.

 PICMG add-on bus with on-board PC/104 bus connector for

8/16-bit supported.

 Two pieces DIMM sockets supports DRAM up to 1.0 GB.

 Two fast PCI DMA33-IDE connector support four IDE drives

include large size hard disks, CD-ROM, tape backup etc.

 PnP I/O address & IRQ selection.

 Two high-speed RS-232 serial ports support 16C550 UART with

16-byte FIFO. One port provides RS-422/485 selection.

 One enhanced bi-directional parallel port, supports SPP/EPP/ECP.

 On board PS/2 Keyboard and PS/2 Mouse connector.

 On board W83977 super I/O.

 On-board C&T®69000 SVGA adapter with on-chip 2MBytes

memory supports VGA LCD Panel and CRT Monitor display.

 On board Intel®82558 100-Based Network.

 “DiskOnChipTM” Socket supported memory size up to 72 MB.

 On-board two USB ports and one IrDA port.

 Build-in one industrial WDT Watch-Dog-Timer.

 AWARD Y2K PnP Flash BIOS.

 Hardware Temperature Alarm

*It will be a Warning “beep” come out if the CPU’s temperature reached

60℃. And it will stop as the CPU’s temperature going down below 60℃

again.

1.2 Specifications

 CPU: One piece Intel®Pentium®II-III-Celeron233/ 266/ 300/ 333/

400/450/500/650MHz.

 Bus interface: PICMG bus, comply with ISA and PCI slot One

on-board PC/104 bus connector.

 Chipset: Intel®82443 BX bus-100MHz chipset.

 Data bus: 64-bit

 Processing ability: 64-bit

 C&T®VGA Controller: C&T® 69000 VGA, on-chip 2 MB memory

included, supports up to 1280x1024 256 colors VGA modes

resolution. Also provides one 50-pin LCD Panel connector, one

internal 10-pin VGA-CRT connector.

 PCI Enhanced IDE Interfaces: Total four IDE drives supports with

Mode 3 & 4 DMA33 function provides transfer rate up to 33.3MB/sec.

 RAM memory: Two pieces 168-pin DIMM sockets supports up to

1.0 GBytes.

 Cache memory: Slot-1 socket supports Intel's

Pentium®II-III-CeleronCPU with build-in 512KB Pipeline burst

cache memory.

 Floppy disk drive interface: Supports up to two floppy disk drives.

 LAN: Intel® 82558 supports 100-Based.

 Parallel port: Supports SPP/ECP/EPP.

 Serial ports: Two RS-232 ports with 16-byte FIFO 16C550 UART.

One port provides RS-422/485 selection.

 BIOS: AWARD Y2K PnP Flash BIOS.

 WDT Watchdog timer: Periods set 1, 2, 10, 20 , 110 or 220

seconds, activity trigger with Reset or NMI.

 DMA channels: 7

 Temperature Alarm: Hardware monitoring.

 Interrupt levels: 15

 Keyboard: 6-pin mini-DIN connector or 5-pin header.

 Mouse: 6-pin mini-DIN connector support PS/2 type mouse.

 USB: Supports 2 USB header.

 IR interface: Supports one lrDA TX/RX header.

 Flash memory Disk: Socket for DiskOnChip™ (DOC).

 Fuse: Automatically resumes polyswitch resettable fuse.

 Extra Power: Provides one 4-PIN extra DC +5V/+12V power

connector.

 CMOS: DS12B887 or equivalent device.

 Power voltage requested: +5V, +12V and -12V.

 Maximum Power Consumption: +5V@5A(350MHz PII),

+12V@20mA,

-12V@20mA.

 Operating temperature: 0-55°C (CPU need cooler).

 Board size: 7.3"(L) x 4.8" (W) (185mm x 122mm).

The HS-6011 provides with VGA Interface to LCD and Monitor, IDE-DMA33,

WDT, DOC, USB, IrDA and LAN etc.

The HS-6011V provides with all function but without LAN.

The HS-6011L provides with all function but without VGA.

The HS-6011P provides with all function but without VGA and without LAN.

1.3 Delivery Package

The delivery package of HS-6011 includes all following items:

 One HS-6011 Industrial Single Board

 One Printer Port Bracketed Flat Cable

 One COM Port Bracketed Flat Cable

 Two IDE port Flat Cable

 One FDD port Flat Cable

 One PS/2 to Standard DIN type Keyboard Transfer Cable

 Utility Diskette

 User’s Manual

 5 pin ATX Power Connector Cable

Please contact with your dealer if any of these items are missing or

damaged when purchasing. And please keep all parts of the

delivery package with packing materials in case of you want to ship

or store the product in feature.

Chapter-2

Hardware Installation

This chapter provides the information on how to install the hardware

of HS-6011. At first, please follow up sections 1.3, 2.1 and 2.2 in

check the delivery package and carefully unpacking. Following

after, the jumpers setting of switch, watchdog timer and the

DiskOnChipaddress selection etc.

2.1 Caution of Static Electricity

The HS-6011 has been well package with an anti-static bag in

protect its sensitive computer components and circuitry from the

damage of static electric discharge.

Note: DO NOT TOUCH THE BOARD OR ANY OTHER

SENSITIVE COMPONENTS WITHOUT ALL NECESSARY

ANTI-STATIC PROTECTION.

You should follow the steps as following to protect the board in

against the static electric discharge whenever you handle the

board:

1. Please use a grounding wrist strap on whoever needs to handle

the HS-6011. Well clip the ALLIGATOR clip of the strap to the end

of the shielded wire lead from a grounded object. Please put on

and connect the strap before handle the HS-6011 for harmlessly

discharge any static electricity through the strap.

2. Please use anti-static pad for put any components or parts or

tools on the pad whenever you work on them outside the

computer. You may also in use the anti-static bag instead the

pad. Please ask from your local supplier in help up your

necessary parts on anti-static requirement.

Ce manuel convient aux modèles suivants

Table des matières

Manuels Ordinateur monocarte populaires d'autres marques

WIN Enterprises

WIN Enterprises PL-80910 Manuel utilisateur

AXIOMTEK

AXIOMTEK SBC81206 Series Manuel utilisateur

Embest

Embest SOM-PH8800 Manuel utilisateur

SeaLevel

SeaLevel SBC-R9 Manuel utilisateur

SMART Embedded Computing

SMART Embedded Computing ATCA-8310 Manuel utilisateur

WinSystems

WinSystems PPM-LX800-G Manuel utilisateur

GIGAIPC

GIGAIPC QBiX-PPC Series Manuel utilisateur

OLIMEX

OLIMEX A10S-OLinuXino-MICRO Manuel utilisateur

Commell

Commell FS-978 Manuel utilisateur

GIGAIPC

GIGAIPC QBiP-8665A/ Manuel utilisateur

VersaLogic

VersaLogic Python EBX-11 Manuel utilisateur

Micro Computer Specialists

Micro Computer Specialists IRV-3702 Manuel utilisateur

CompuLab

CompuLab SB-A510 Manuel utilisateur

Premier Farnell

Premier Farnell Embest SBC8530 Manuel utilisateur

MicroSys Electronics

MicroSys Electronics miriac SBC-LS1043A2 Manuel utilisateur

Aaeon

Aaeon UP Manuel utilisateur

Portwell

Portwell WUX Series Manuel utilisateur

Lanner electronics

Lanner electronics IAC-F847 Series Manuel utilisateur