Bose FreeSpace 360 Manuel utilisateur

CAUTION: The FreeSpace® 360P/360 loudspeaker conta ns no

user serv ceable parts. To prevent warranty nfract ons, refer

serv c ng to warranty serv ce centers or factory serv ce.

PROPRIETARY INFORMATION

THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION

OF BOSE CORPORATION WHICH IS BEING FURNISHED

ONLY FOR THE PURPOSE OF SERVICING THE IDENTIFIED

BOSE PRODUCT BY AN AUTHORIZED BOSE SERVICE CEN-

TER OR OWNER OF THE BOSE PRODUCT, AND SHALL NOT

BE REPRODUCED OR USED FOR ANY OTHER PURPOSE.

WARRANTY INFORMATION

The FreeSp ce 360P/360 loudspe ker is covered by 5 ye r w rr nty

Contents

Product Descr pt on ..........................................................................................................................2

Spec f cat ons ....................................................................................................................................2

D sassembly/Assembly Procedures ................................................................................................3

Figure 1. Wiring Di gr m.....................................................................................................................3

Test Procedures ................................................................................................................................4

Figure 2. 4 Ohm P ssive Version Equ lizer Schem tic Di gr m ........................................................4

Figure 3. 70/100V P ssive Version Equ lizer Schem tic Di gr m......................................................4

Ma n Part L st.....................................................................................................................................5

Figure 4. Exploded View ......................................................................................................................6

Equal zer PCB Part L st ....................................................................................................................7

Packag ng Part L st ...........................................................................................................................7

Figure 5. P ck ging View ....................................................................................................................7

Figure 7. Equ lizer PCB Component L yout .......................................................................................7

Figure 6. Position of EQ PCB on Driver...............................................................................................7

Click here for FS360 Image

ECN 29027 added "end user owners guide"

SPECIFICATIONS

PRODUCT DESCRIPTION

The FreeSp ce® 360P/360 is full-r nge environment l loudspe ker intended for b ckground

music nd p ging. There re three versions. The FS360P 70V/100V, 25W version h s n intern l

p ssive equ lizer. The FS360P 4 Ohm, 25W version h s n intern l p ssive equ lizer. The FS360

70V/100V, 25W version requires Bose® FS360 ctive equ lizer to be connected to or loc ted in

the mplifier.

The FreeSp ce 360P/360 c n be inst lled in-ground with pproxim tely one-h lf of the spe ker

exposed bove ground. It c n lso be perm nently secured bove ground on horizont l surf ce

such s deck.

External d mens ons: 13.80" b se di meter x 14.6" height

(320 mm b se di meter x 370 mm height)

We ght (packed system): 12.0 lbs. (5.4 kg)

Internal cab net volume: Top enclosure: 142 cubic inches (2.3 liters)

Bottom enclosure: 659 cubic inches (10.8 liters)

Port: Diffuser port: Tuned to 80 Hz

Three connecting ports: Tuned to 180 Hz

Impedance (nom nal): Non-p ssive version: 214 Ohm, 70V tr nsformer @ 25W

271 Ohm, 100V tr nsformer @ 25W

P ssive version: 414 Ohm, 70V tr nsformer @ 25W

852 Ohm, 100V tr nsformer @ 25W

Non-tr nsformer version: 4 Ohms

Power Handl ng: 25W (70V, 100V) continuous per IEC-268-5, 100 hour dur tion

Sens t v ty (1W, 1M): 80 dB SPL, free field, per IEC-268-5 (for oct ve-b nd centered t 400 Hz)

DISASSEMBLY/ASSEMBLY PROCEDURES

1. Mount ng Plate Removal

1.1 Remove the four screws (20) th t secure

the mounting pl te (10) to the b se housing

(14).

1.2 Lift off the mounting pl te.

2. Mount ng Plate Replacement

2.1 Align the mounting pl te (10) to the b se

(14). Repl ce the four screws (20) th t secure

the mounting pl te to the b se.

3. Dr ver/Equal zer PCB Removal

Note: For versions without p ssive equ l-

izer, ignore references to the equ lizer PCB.

3.1 Remove the three screws (6) th t secure

the driver protector (4) nd the driver (1) to the

c p housing (13).

3.2 Lift off the driver protector. The equ lizer

PCB is tt ched by screw to the driver

m gnet. Work the driver with tt ched equ l-

izer PCB out of the c p housing.

3.3 Cut the wires s close s possible from the

driver termin l. Remove the screw th t se-

cures the equ lizer PCB to the driver m gnet.

4. Dr ver/Equal zer PCB Replacement

Note: For versions without p ssive equ l-

izer, ignore references to the equ lizer PCB.

4.1 Referring to Figure 6, position the equ l-

izer PCB on the driver nd using the screw

removed in procedure 3.3, tt ch the equ lizer

PCB to the driver (1) m gnet. Att ch the red

wire to the positive (+) driver termin l nd the

bl ck wire to the neg tive (-) driver termin l.

Refer to Figure 1 Wiring Di gr m.

4.2 Work the ssembled driver nd equ lizer

into the c p housing (13). Twist together ny

excess wire to prevent wire buzz.

4.3 Align the driver protector (4), the driver

nd the driver g sket (2) to the c p housing.

Repl ce the three screws (6) th t secure the

driver to the c p housing.

5. Transformer Removal

Note: For tr nsformer versions only.

5.1 To g in sl ck in the wires, perform proce-

dure 3.1 nd 3.2 first.

5.2 Remove the four screws (8) th t secure

the tr nsformer pl te (11) to the c p housing

(13). Lift up the tr nsformer pl te.

5.3 M ke note of the wiring configur tion

nd then remove the wires from the tr ns-

former (3).

5.4 Remove the two nuts (9) th t secure the

tr nsformer to the tr nsformer pl te.

6. Transformer Replacement

Note: For tr nsformer versions only.

6.1 Align the tr nsformer (3) to the tr nsformer

pl te (11) nd repl ce the two nuts (9) th t

secure the tr nsformer to the tr nsformer

pl te.

6.2 Referring to the wiring configur tion notes

t ken in procedure 5.3 or to Figure 1 Wiring

Di gr m, tt ch the wires to the tr nsformer.

6.3 Lower the tr nsformer with tt ched

tr nsformer pl te into the c p housing (13)

nd secure into pl ce with four screws (8).

6.4 Use procedure 4.2 nd 4.3 to repl ce the

driver.

F gure 1. W r ng D agram

P ssive Version

Non-p ssive Version

(Refer to Figure 4)

COM

+IN

Tr nsformer

EQ PCB

Red

Bl ck

Wire h rness

C p

(in h rness)

Red

Bl ck

Wire post

(two pl ces)

Red

Tr nsformer

Red

Bl ck

Wire h rness

Red

Bl ck

Wire post

(two pl ces)

COM

+IN

TEST PROCEDURES

1. Phase Check

1.1 Referring to Figure 1, ensure proper wiring

of the loudspe ker.

2. Rub and T ck Test

2.1 Apply 35Vrms, 80Hz sign l to the input

of the loudspe ker.

Note: No extr neous noises such s rubbing,

scr ping or ticking should be he rd. To distin-

guish between norm l suspension noise, rubs

nd ticks, displ ce the cone of the driver with

your finger. If the sound c n be m de to go

w y or get worse, it’s rub or tick nd the

driver should be repl ced. If the noise st ys

the s me, it’s norm l suspension noise nd

will not be he rd with regul r progr m m te-

ri l.

3. A r Leak Test

3.1 Apply (6Vrms for 4 Ohm version)

(35Vrms for tr nsformer version), 80Hz sign l

to the input of the loudspe ker.

3.2 Check for ir le ks round the c binet,

driver, nd tr nsformer pl te. Repl ce ny

g sket th t is found to be defective.

4. Sweep Test

4.1 Apply (6Vrms for 4 Ohm version)

(35Vrms for tr nsformer version), 50Hz sign l

to the input of the loudspe ker.

4.2 Sweep the sign l gener tor from 50Hz to

5kHz. Listen for buzzes, r ttles or extr neous

noises from the driver or intern l p rts. A

whooshing noise from the port round 80Hz is

ccept ble. Repl ce ny driver th t buzzes.

Redress ny wire th t buzzes.

NOT USED

OUT-

OUT+IN+

IN-

NOT USED

6.2 Ohm

10uF, BP, 50V

JP1

NOT USED

2.4 Ohm

PTC1

1.5mH

NO CONNECTION

F gure 3. 70/100V Pass ve Vers on Equal zer Schemat c D agram

OUT-

OUT+IN+

IN-

47uF, BP, 50V

6.2 Ohm

10uF, BP, 50V

JP1

NOT USED

2.4 Ohm

PTC1

1.5mH

F gure 2. 4 Ohm Pass ve Vers on Equal zer Schemat c D agram

MAIN PART LIST

(Item numbers re referenced in Figure 4)

Note: The ctive equ liz tion version requires the use of n extern l Bose® ctive equ lizer.

The p ssive version h s p ssive equ lizer PCB mounted to the re r of the driver.

Item Number Descr pt on Part

Number Qty.

4.5" Driver ( ctive equ liz tion version) 196241 1

4.5 " Driver With Equ lizer PCB (tr nsformer p ssive version)

Consists of:

Driver, 4.5”, Environment l

Equ lizer PCB

Screw, T pp, 8-32x.375, HEXW, HEX

W sher, Fender, Non-M gnetic

254390

254379

254378

134517-06

181700-01

4.5 " Driver With Equ lizer PCB (4 Ohm p ssive version)

Consists of:

Driver, 4.5”, Environment l

Equ lizer PCB

Screw, T pp, 8-32x.375, HEXW, HEX

W sher, Fender, Non-M gnetic

257251

254379

257250

134517-06

181700-01

2 G sket, Driver, 4.5” 116572 1

Tr nsformer, 70V, 25W 196236

3Tr nsformer, 100V, 25W 196237 1

4Protector, Driver1200031

70V Wire H rness, With Inline 6.8 uF C p. (p ssive version)

(25 uF, 150V, 20%, BP C p citor)254428

125959

100V Wire H rness, With Inline 4.7 uF C p. (p ssive version)

(4.7 uF, 100V, 5%, NP C p citor) 252370-001

252369-475

Wire H rness ( ctive equ liz tion nd 4 Ohm p ssive version) 191929

Screw, TT, 8-32x.75, HEX, SL/XREC (p ssive version) 256070-08

6Screw, TAPP, 8-32, PAN He d ( ctive equ liz tion version) 145727-06 3

Screw, TAPP, 8-10, .75, HEXW, HEX (p ssive version) 178835-12

7Screw, TAPP, 8-11, PAN, XREC ( ctive equ liz tion version) 193902-12 3

8 Screw, TAPP, 8-32x.375, PAN, XRC/S 145727-06 4

9 Nut, Hex, 8-32, KEPS 100413-2 2

10 Pl te, Mounting 193903 1

11 Pl te, Tr nsformer, Bl ck 191927-001 1

12 Grille, Diffuser, Bl ck 191926-001 1

Housing, C p, Gr nite Green (p ssive version) 190691-005

13 Housing, C p, Green ( ctive equ liz tion version) 190691-003 1

Housing, B se, Gr nite Green (p ssive version) 190690-005

14 Housing, B se, Green ( ctive equ liz tion version) 190690-003 1

F gure 4. Exploded V ew

BLACK

RED

BLACK

CAPACITOR (IN HARNESS)

3x 7

EQ PCB

No transformer n

the 4 Ohm vers on

Reference

Designator Description Part Number Qty. Note

R1 6.2 Ohm, WW, 5W, 10% 125605-6R2 1

R2 2.4 Ohm, WW, 5W, 10% 125605-2R4 1

C1 47uF, EL, BP, 85, 50V, 20% 136548 1 4 Ohm vers on only

C2 10 uF, EL, BP, 85C, 50V, 20% 138365 1

L1 1.5 mH 139571 1

PTC1 Polysw tch, 60V, RXE135 190348-135 1 4 Ohm vers on only

- Screw, Mach, 6-32, PAN, XREC 181701-01 1

- Nut, HEX, 6-32 103234-632 1

- Washer, Fender, Non-Magnet c 181700-01 1

- P n, Grooved, .52x.34x.045 129000-5234 2

PACKAGING PART LIST

igure 5. Packaging View

EQUALIZER PCB PART LIST

(Pass ve vers on)

20 2122

Item

Number Description Part Number Qty.

15Manual, Owner’s 254405 (PRO installer) 259124 (end user) 1each

16 Carton 254393 1

17 Bag, Poly, 48X24X14X2 M l 128238 1

18 Connector, W re Nut, 16-22 AWG 188199-001 2

19 Bag, Poly, 3x3x2 M l 107305 1

20 Screw, Tapp, 8-11, PAN, XREC, 1.75 193902-28 4

21 Washer, Flat, .438” D ameter, #8 137923-08 4

22 Connector, Butt Spl ce, 10-22 AWG 198380-2218 1

HOT MELT SHOULD NOT COVER

RESISTORS OR WIRE WRAP PINS.

+ INPUT

+ OUTPUT

igure 7. Equalizer PCB Component Layout

igure 6. Position of EQ PCB on Driver

Serv ce Manual

FreeSpace® 360 Loudspeaker

Pass ve (FS360P)

Non-pass ve (FS360)

P rt Number 197458 REV. 01

Click here to go to table of contents

Spec f cat ons and Features Subject to Change W thout Not ce

Bose Corpor tion

The Mount in

Fr mingh m M ss chusetts USA 01701

P/N 197458 REV. 01 6/2000 For Technic l Assist nce or P rt Orders, C ll 1-800-233-4408

Autres manuels pour FreeSpace 360

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Bose Intervenants

Bose

Bose PANARAY 620M Manuel utilisateur

Bose

Bose SOUNDLINK REVOLVE Guide d'installation

Bose

Bose FreeSpace DS 40F 8 ohm Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel de la liste des pièces

Bose

Bose Acoustimass 700 Manuel utilisateur

Bose

Bose Acoustic Wave Cannon system II (AWCS II) Manuel utilisateur

Bose

Bose ACOUSTIMASS PRO Manuel utilisateur

Bose

Bose Panaray LT Series III Manuel utilisateur

Bose

Bose DesignMax DM6PE Manuel utilisateur

Bose

Bose SoundDock XT Manuel utilisateur

Bose

Bose FreeSpace DS 16F Manuel utilisateur

Bose

Bose SoundLink Revolve+ II Manuel utilisateur

Bose

Bose Companion 3 Series II Manuel utilisateur

Bose

Bose 302 A Instructions de montage

Bose

Bose Interaudio Alpha Series Manuel utilisateur

Bose

Bose ShowMatch SM5 Mode d’emploi

Bose

Bose PANARAY MB4 Manuel utilisateur

Bose

Bose SOUNDLINK MICRO Manuel utilisateur

Bose

Bose 829393-2100 Mode d’emploi

Bose

Bose FreeSpace FS4SE Manuel utilisateur

Bose

Bose 111 Manuel utilisateur

Bose

Bose 151 Manuel utilisateur

Bose

Bose Acoustimass 500 Manuel utilisateur

Bose

Bose SoundTouch 10 Manuel utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur

Tannoy

Tannoy SYSTEM 600a Manuel utilisateur