Bose 301 Series V Manuel utilisateur

Bose®301®Series IV Direct/Reflecting®Speakers

Owner’sGuide

October30,2001

AM181869_04_V.pdf

2 October 30, 2001 AM181869_04_V.pdf

English

Introduction

Thank you

Congratulations on your purchase of Bose

301

Series IV Direct/Reflecting

speakers. Their

integrated system of advanced Bose technologies delivers superior sound reproduction

from a bookshelf design.

For your records

Serial numbers are located on the back of each 301 speaker.

Serial numbers:___________________________ and _______________________________

Dealer name:__________________________________________________________________

Dealer phone: ________________________________ Purchase date: __________________

We suggest you keep your sales slip and warranty card together with this owner’s guide.

Declaration

of Conformity

We, the offerer:

Bose

Corporation, The Mountain

Framingham, MA 01701-9168 USA

acknowledge our sole responsibility, that the product:

Kind of equipment: Loudspeakers

Type designation: 301

Series IV Direct/Reflecting

speakers

in accordance with EMC Directive 89/336/EEC and Article 10(1) of the Directive,

is in compliance with the following norm(s) or document(s):

Technical regulations: EN50081-1, EN50082-1

Accredited by Bose Corporation

3 November 1995

Bose B.V., Nijverheidstraat 8 Paul Olean, General Manager, Bose Europe

1135 GE Edam, The Netherlands Manufacturer’s authorized EU

representative

AM181869_04_V.pdf October 30, 2001 3

English

Contents

Where to find...

Setting Up

Before you begin ........................................................................................................4

Unpack the carton......................................................................................................4

Select the locations for your 301®speakers ..............................................................5

Choose the cord.........................................................................................................6

Prepare the cord.........................................................................................................6

Make the connections ................................................................................................6

Check the connections...............................................................................................7

Test the speakers .......................................................................................................7

Using and Maintaining Your 301®Series IV Speakers

Enjoying sound in a variety of ways ...........................................................................8

Cleaning the speakers................................................................................................8

Warranty period..........................................................................................................8

Troubleshooting..........................................................................................................9

Customer service .......................................................................................................9

Product Information

Technical information ...............................................................................................10

Optional accessories ................................................................................................10

Bose®Corporation ................................................................................. inside back cover

4 October 30, 2001 AM181869_04_V.pdf

English

Before you begin

Your 301

Series IV Direct/Reflecting

speakers re-create a natural balance of reflected and

direct sound energy for an open, spacious performance. They are designed at Bose

bring you high-quality listening pleasure.

The Direct/Reflecting

tweeter inside each speaker creates a pattern of sound similar to

what you experience at a live concert. In addition, the Stereo Targeting

tweeters help

establish the natural balance of sound, for full enjoyment of stereo even when you move

around the room. These distinct left and right speakers also feature tuned port enclosures

that contribute to their deep, room-filling bass. An advanced crossover design adds to the

realism and clear definition of both musical instruments and voices.

Your 301 Series IV speakers are significantly different from conventional speakers, so be

sure to read this owner’s guide. It will help you set up and use your speakers properly, for

the greatest enjoyment.

Unpack the carton

Carefully unpack the carton and save all packing materials for possible future use. Check

the carton contents (Figure 1).

If either speaker appears damaged, do not use them. Instead, repack both speakers in the

original carton and notify your authorized Bose dealer immediately.

Note:

Now is a good time to record the speaker serial numbers on page 2 of this guide

and on your warranty card.

Setting Up

Figure 1

What comes in the carton:

• Left speaker

• Right speaker

• 8 self-adhesive rubber feet

CAUTION:

To avoid danger of suffocation,

keep the plastic bags that

wrap these speakers out

of the reach of children.

Rubber feet

LEFT speaker

RIGHT speaker

AM181869_04_V.pdf October 30, 2001 5

English

Select the locations for your 301

speakers

Bose

301 speakers are designed to fit horizontally on a table or shelf (Figure 2). Be sure to

choose a stable and level surface for each speaker.

Place the left and right speakers (marked on the back of each one) on the left and right

sides of your room, as you face them. Exactly where you put them depends on the size and

style of your room and where you think they sound best. Feel free to experiment to find a

location that is both convenient and provides the sound you prefer.

Note:

Because the grilles on the front of each speaker protect the drivers inside, we

recommend that you do not remove the grilles.

Here are some basic guidelines:

• Place the speakers 4 to 12 feet (1 to 4 m) apart.

• Choose a stable and level surface for each speaker, and attach the rubber feet.

• Leave at least 12 inches (30 cm) of space from the end of a speaker to the side wall.

• Leave at least 18 inches (45 cm) from the speakers to the floor or ceiling.

• Leave at least 24 inches (60 cm) from the speakers to any TV screens or monitors.

• Keep the back of the speakers within 18 inches (45 cm) of the wall behind them.

• Do not place the speakers exactly halfway between the floor and ceiling or any other

sound-reflecting hard surface.

• Do not put the speakers in a vertical position.

Note:

Bose speaker stands or wall brackets can extend your placement options. See

“Optional accessories” on page 10.

Setting Up

CAUTION:

301 speakers are designed

specifically for placement on a

stationary shelf, table, or stand.

On smooth surfaces like

marble, glass or highly pol-

ished wood, vibrations may

cause the speakers to slide.

So be sure to attach the self-

adhesive rubber feet to the

bottom surface of each

speaker for added stability and

protection. The feet go in the

corners of the flat surface,

inside the seam.

Do not use these speakers in

a moving vehicle.

To mount the speakers on a

wall, use only the Bose WB-3

wall mounting bracket. Please

follow the mounting instructions

that come with these brackets.

Improperly mounted speakers

may fall, causing injury and

damage.

To contact Bose, please refer

to the subsidiary offices

listed on the inside back

cover of this owner’s guide.

Figure 2

Placement guidelines

CAUTION:

For the most realistic sound

image, make sure the left

speaker is placed on the left

and the right speaker is on

the right side of your room, as

you face them.

18" (45 cm)

or more

4-12'

(1-4 m)

18" (45 cm)

or more LEFT

speaker RIGHT

speaker

12" (30 cm)

or more

6 October 30, 2001 AM181869_04_V.pdf

English

Setting Up

CAUTION:

Never use broken or frayed

wiring, which can result in

electrical shock or damage.

Choose the cord

It is important to use the proper gauge (thickness) of speaker cord. Standard zip cord

(2-conductor, 18-gauge wire) works for most applications. You can find this wire at most

electrical and hardware stores.

You will need thicker wire if your speakers will be more than 30 feet (9 m) from a receiver (or

amplifier). Refer to the wire recommendations under “Technical information” on page 10, or

contact your authorized Bose

dealer for more information.

Note:

Before running speaker cord through a wall or under a floor, check your local

building code requirements and safety regulations. You may want to contact an electrical

installer for this information.

Prepare the cord

Speaker cord consists of two insulated wires. The insulation around one wire is marked

(striped, collared, or ribbed). This marked wire is always positive (+). The plain wire is always

negative (–). These wires correspond to the red (+) and black (–) terminals on the speakers

and the receiver.

At the ends of each cord, strip approximately

⁄

inch (12 mm) of insulation from both wires.

Twist the bare end of each wire so loose strands will not touch across terminals. Be sure to

connect each wire to the proper terminal (positive to positive and negative to negative).

Note:

It is sometimes difficult to distinguish wire markings. Inspect both wires carefully.

Make the connections

Just press the terminal tab on the back of each speaker to insert the appropriate wire

(Figure 3).

1. Connect one speaker cord to your right speaker.

a. Attach the marked wire at one end to the red (+) terminal.

b. Attach the plain wire at that end to the black (–) terminal.

2. Connect the other end of the same cord to the RIGHT SPEAKER OUTPUT of your

receiver.

a. Attach the marked wire to the red (+) terminal.

b. Attach the plain wire to the black (–) terminal.

3. Connect the second cord to the left speaker and LEFT SPEAKER OUTPUT. Follow the

steps in 1 and 2 above.

+—

Red terminal tab

Marked wire

Figure 3

How to make terminal connec-

tions

CAUTION:

Before making any connec-

tions, turn off your receiver

and unplug it from the AC

power (mains) outlet. Not

doing so may result in dam-

age to your system.

AM181869_04_V.pdf October 30, 2001 7

English

Setting Up

Check the connections

Check to be sure all connections are made positive to positive (+ to +) and negative to

negative (– to –) (Figure 4). Make sure that no loose strands of wire touch across terminals.

Bridged wires can short circuit and damage the amplifier. Tighten any loose connections

before you plug in the receiver and turn it on.

–+

+–

Back of receiver

Back of LEFT speaker

Back of RIGHT speaker

Test the speakers

To make sure your speakers operate correctly:

1. Place the speakers less than 6 inches (15 cm) apart, facing each other.

2. Turn on your receiver. Set the receiver to MONO (monophonic), if that is an option on

your receiver.

3. Make sure that all special effects (such as surround sound) are turned off.

4. Set the balance control to normal (center position).

5. Play some deep bass passages of music through the speaker.

The sound should seem to come from a point between the two speakers. The bass should

be full and natural. If it is not, one of the connections may be reversed, causing the speakers

to play out of phase (refer to “Make the connections” on page 6).

To correct the problem, make sure all the wires are connected positive to positive (+ to +)

and negative to negative (– to –). Then repeat steps 1 through 5 above to re-test

the speakers.

Figure 4

Completed connections

8 October 30, 2001 AM181869_04_V.pdf

English

Using and Maintaining Your 301

Series IV Speakers

Enjoying sound in a variety of ways

Bose

301

Series IV Direct/Reflecting

speakers are designed to work with a variety of

stereo receivers and amplifiers. The open, spacious performance of these speakers

also makes them an ideal choice for home theater, or for listening to CD’s, tapes, or radio

broadcasts (Figure 5).

Figure 5

301

Series IV Direct/Reflecting

speaker sound path

Cleaning the speakers

Clean the surface of your speakers with a soft damp cloth. Do not use any sprays near the

system or allow liquids to spill into any openings. Also, do not use any solvents, chemicals,

or cleaning solutions containing alcohol, ammonia, or abrasives.

The speaker grille panels require no special care. You may vacuum them carefully to remove

dust.

Warranty period

Bose 301 Series IV Direct/Reflecting

speakers are covered by a limited 5-year transferable

warranty. Details of the coverage are provided on the warranty card that came with your

speakers. Please fill out the information section on your card, detach, and mail to Bose.

AM181869_04_V.pdf October 30, 2001 9

English

Using and Maintaining Your 301

Series IV Speakers

Troubleshooting

Problem What to do

No sound • Make sure the receiver is plugged in and turned on.

• Check to be sure the AC power (mains) outlet is working.

• Disconnect any headphones plugged into the headphone jack.

• Make sure the receiver is not set to MUTE.

• Refer to the owner’s guide that came with your receiver.

• Check connections to both the speakers and the receiver.

Refer to “Make the connections” on page 6. Correct any connec-

tion errors.

No sound from • Disconnect the working speaker from the receiver.

one speaker • Switch the cord of the “faulty” speaker from its original receiver

jacks to the other set of jacks (the working speaker was originally

attached to those jacks).

– If the speaker now works, the problem is in your receiver.

– If the speaker does not work, continue below.

• Remove the cord from the working speaker and connect it to the

“faulty” speaker and either set of receiver jacks.

– If the speaker now works, the problem was in the original

speaker cord.

– If the speaker does not work, the problem is in the speaker.

One speaker • Follow the same procedure for the problem of no sound from

sounds distorted one speaker, as outlined above.

Not enough • Adjust the bass and treble controls on the receiver.

bass or treble • Check the connections to make sure they are correctly in phase

(+ to + and – to –). Refer to “Make the connections” on page 6.

• Move the speakers closer to or farther from the side walls or other

sound-reflecting hard surfaces.

Customer service

If the troubleshooting guidelines above do not solve your problem, contact your authorized

Bose

dealer to arrange for service. To obtain information or service directly from Bose, refer

to the listing at the end of this guide. Bose Corporation will make every effort to correct any

problem within the terms of your warranty.

10 October 30, 2001 AM181869_04_V.pdf

English

Product Information

Technical information

Features

Direct/Reflecting

speaker design

Stereo Targeting

tweeters

Tuned port enclosure

Syncom

computer quality control

Driver complement

One (1) 8-inch (20 cm) woofer

One (1) 3-inch (7.6 cm) high-sensitivity tweeter

One (1) 2-inch (5 cm) high-sensitivity tweeter

Compatibility/Impedance

Compatible with amplifiers and receivers rated from 10 to 150 watts per channel.

Rated 8 ohms

Wire recommendations

Based on a maximum frequencies response deviation of ±0.5 dB

Gauge Length

18 (0.75 mm

) 30 ft (9 m) maximum

16 (1.5 mm

) 45 ft (14 m) maximum

14 (2.0 mm

) 70 ft (21 m) maximum

Enclosure

Polymer and vinyl veneer over wood construction with black, rosewood, or gray finish

Size/Weight

Speaker: 10

⁄

"H x 16

⁄

"W x 9

⁄

"D (26 x 42 x 24 cm)

Each speaker, unpacked: 11.6 lb (5.2 kg)

Speaker pair in shipping carton: 27.7 lb (12.5 kg)

Optional accessories

Bose

AS-3 speaker stands and WB-3 wall mounting brackets

are designed for use with 301

Series IV Direct/Reflecting

speakers. For information, or to order accessories, contact your

authorized Bose dealer. To contact Bose directly, refer to the

listing at the back of this owner’s guide.

Figure 6

Bose

AS-3 speaker stand and

WB-3 wall mounting brackets

Autres manuels pour 301 Series V

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Bose Système de haut-parleurs

Bose

Bose FreeSpace 3 Manuel utilisateur

Bose

Bose L1 Pro8 Manuel utilisateur

Bose

Bose Acoustimass 6 Series II Manuel utilisateur

Bose

Bose Acoustimass 3 Series Manuel utilisateur

Bose

Bose 4.2 Manuel utilisateur

Bose

Bose 501s Manuel utilisateur

Bose

Bose Smart Ultra Soundbar Manuel utilisateur

Bose

Bose L1 Pro8 Manuel utilisateur

Bose

Bose FreeSpace 3 Manuel utilisateur

Bose

Bose 601 Series II Manuel utilisateur

Bose

Bose Soundbar 500 Manuel utilisateur

Bose

Bose COMPANION 50 Manuel utilisateur

Bose

Bose SB600 Manuel utilisateur

Bose

Bose SOUNDDOCK PORTABLE DIGITAL MUSIC SYSTEM Manuel utilisateur

Bose

Bose L1 Model II Mode d’emploi

Bose

Bose Acoustimass 15 Series II Manuel utilisateur

Bose

Bose Acoustimass 5 Series Manuel utilisateur

Bose

Bose Acoustimass 5 series V Manuel utilisateur

Bose

Bose SOUNDBAR 700 Manuel utilisateur

Bose

Bose COMPANION 20 Manuel utilisateur

Bose

Bose Solo 5 Manuel utilisateur

Bose

Bose SoundTouch Mode d’emploi

Bose

Bose Smart Soundbar 300 Manuel utilisateur

Bose

Bose Freestyle Speaker System Manuel utilisateur

Manuels Système de haut-parleurs populaires d'autres marques

JVC

JVC CA-MXK5R Manuel utilisateur

LG NB4532B Manuel utilisateur

JVC

JVC CA-FSH100 Manuel utilisateur

5Core

5Core Pro Series Manuel utilisateur

EAW

EAW MQV1394e Manuel utilisateur

Lynx

Lynx GXR-LA10A Manuel utilisateur

iLive

iLive ITB066B Manuel utilisateur

RDX

RDX QuickStation 4 Manuel utilisateur

Electro-Voice

Electro-Voice S-122 Manuel utilisateur

Sven

Sven SPS-619 GOLD Manuel utilisateur

Pioneer

Pioneer CS-7070 Manuel utilisateur

EAW

EAW UB82e Manuel utilisateur

Sondpex

Sondpex Active Speaker System and Digital Music... Manuel utilisateur

JVC

JVC NX-PN7 Manuel utilisateur

Marshall Amplification

Marshall Amplification AR-DM61-BT Manuel utilisateur

Yamaha

Yamaha NX-A01 - Speaker Sys Manuel utilisateur

SE Audiotechnik

SE Audiotechnik I-LINE Manuel utilisateur

Gemini

Gemini WRX-843 Series Manuel utilisateur