Bosch SAIC GRADE-X Manuel utilisateur

SAIC GRADE-X

Automotive Diagnostic System

USER MANUAL

Version 2.3

SAIC GRADE-X

Statement

 This user manual is SAIC GRADE-X-specific. Without Bosch AA-AS (hereinafter referred to as

"BOSCH") written permission, any other company or individual in any form (electronic,

mechanical, photocopying, recording or otherwise), has no copy and backup.

 This user manual only provides SAIC GRADE-X operating instructions. Bosch will not take any

responsibility if this user manual is used to operate on other equipment.

 None SAIC GRADE-X product quality problems: such as user abusing, misusing, unauthorized

disassembling, repairing of this equipment, any other operation not following this user manual

that leading to this equipment broken will not be in the scope of free maintenance.

 This user manual is for user with professional automotive and service technology.

Trademark

BOSCH is a registered trademark of Bosch Automotive Service Solutions (short for BOSCH) in China and

other countries. All other BOSCH trademarks, service marks, domain names, logos, and company names

referred to in this manual are either trademarks, registered trademarks, service marks, domain names,

logos, company names of or are otherwise the property of BOSCH or its affiliates. In countries where any of

the BOSCH trademarks, service marks, domain names, logos and company names is not registered,

BOSCH claims other rights associated with unregistered trademarks, service marks, domain names, logos,

and company names. Other products or company names referred in this manual may be trademarks of their

respective owners. You may not use any trademark, service mark, domain name, logo, or company name of

BOSCH or any third party without permission from the owner of the applicable trademark, service mark,

domain name, logo, or company name.

SAIC GRADE-X

SAIC GRADE-X User Manual instructions

 Please read this user manual carefully before using SAIC GRADE-X.

 The current user manual is based on the current features and functions available. Any new added features and

functions will be added to the user manual in the future.

 When reading the manual, please pay special attention to the words “Note” and “Warn”. Read them carefully

for appropriate operation.

SAIC GRADE-X HARDWARE maintenance

 Avoid shaking or dismantling as it may damage the internal components.

 Do not use hard or sharp objects to touch it; do not use excessive force; do not expose the screen to strong

sunlight for a long period.

 Caution: keep it away from water, moisture, high temperature or very low temperature;

 Keep it away from strong magnetic fields.

Operation Instructions

 Keep the scanner away from heat or fumes when using it;

 If the vehicle battery contains acid, Please keep your hands and skin or fire sources away from the battery during

test

 Exhaust gas of vehicle contains harmful chemicals, please ensure adequate ventilation.

 Do not touch the cooling system components or exhaust manifolds when engine is running to high temperature;

 Make sure the car is securely parked and the selector is at P or N position to prevent the vehicle from moving

when engine starts;

 Make sure the diagnostic link connector is OK before starting the test; otherwise the scanner may be damaged.

BOSCH suggests you test the Power/Earth with multi-meter first.

 Do not switch off the power or unplug the connectors during testing, otherwise you may damage the ECU or

scanner;

Precautions

 Must be performed according to the above conditions.

 Using SAIC GRADE-X tester, away from heat and moving parts to avoid interference.

When energized electrical components, never disconnect the circuit to prevent the self-inductance, mutual

inductance computer and automotive sensors.

 When the electrical work, with non-magnetic objects close to the vehicle control unit with a vehicle control unit

may be damaged.

 When dismantling car control unit or electrical components shall be carried out at the ignition switch is turned

off after 10 minutes.

SAIC GRADE-X

CONTENT

0 SAIC GRADE-X OS Requirement ................................................................................................ 4

0.1 GRADE-X not support WinXP any more ............................................................................. 4

0.2 GRADE-X supported OS ...................................................................................................... 4

0.3 How to get OS Version(Take WinXP as an example) .......................................................... 4

1. Software Installation ............................................................................................................... 5

2. Software Registration .............................................................................................................. 8

3. Software Upgrade .................................................................................................................. 10

4. VCI connector ........................................................................................................................ 13

5. UI Description ........................................................................................................................ 14

5.1 Startup interface .............................................................................................................. 14

5.2 System Settings ................................................................................................................ 14

5.2.1 【】VCI settings .............................................................................................. 14

5.2.2 【】Settings .................................................................................................... 15

5.2.3 【】Print Content............................................................................................ 16

5.2.4【】About ........................................................................................................ 17

5.2.5【】Exit ............................................................................................................ 18

6. Test Steps .............................................................................................................................. 18

6.1 Vehicle Selection .............................................................................................................. 19

6.2 Choose ECUs manually or check ECUs automatically ...................................................... 19

6.3 Vehicle Information【】 ........................................................................................... 22

6.3.1 Vehicle Information ...................................................................................................... 22

6.3.2 ECU Information ........................................................................................................... 23

6.4 DTC【】 ................................................................................................................. 26

6.5 Data List【】 ............................................................................................................. 34

6.6 Actuator Test【】 .................................................................................................... 51

6.7 Configuration【】 .................................................................................................... 54

6.8 Special Function【】 ............................................................................................... 58

SAIC GRADE-X

6.9 Reflash【】 ............................................................................................................... 63

6.10 Test Report【】 ................................................................................................... 70

SAIC GRADE-X

0 SAIC GRADE-X OS Requirement

0.1 GRADE-X not support WinXP any more

GRADE-X will not support WinXP any more because:

 Microsoft will not provide any service and support for WinXP any more

 Diagnostic requirement becomes more and more complexed, GRADE-X need to use

latest new technology to meet new diagnostic requirement

 WinXP can’t meet the new technical interface but Microsoft will not update

WinXP to support this

0.2 GRADE-X supported OS

Currently SAIC GRADE-X can run on Win7 and Win8. Win10 will be supported by the

end of this year. But the OS supported may change because of Microsoft’s strategy.

0.3 How to get OS Version(Take WinXP as an example)

Step 1: Right click “My Computer” on the desktop

Step 2: Choose “Properties”

Step 3: You can get the OS version from the screen

Step 4: You will see the next Screen if your OS is WinXP.

SAIC GRADE-X

1. Software Installation

Steps:

0） Get the latest installation package from the following site.

1） https://obd.maxuscloud.com/download/

2） Double click downloaded SAIC GRADE-X package in the previous step and click

【Next】. Shown as below：

3） In SAIC GRADE-X installation page, please read license agreement carefully, and

you need to click【I accept the agreement】 to continue. And then click【Next】

to continue. Shown as below：

SAIC GRADE-X

4） In the SAIC GRADE-X installation path page, click Browse to choose the path to

install SAIC-GRADE-X. Or else the default path will be used. For Win7 the

default path is C:\Program Files X86\Bosch\SAIC GRADE-X. And then click【Next】

to continue. Shown as below：

5） In the SAIC GRADE-X data path page, click Browse to choose the path to install

the data. Or else the data will be installed into the default path. For Win7

the default path is C:\Program Data\Bosch\SAIC GRADE-X. And then click 【Next】

to continue. Shown as below:

SAIC GRADE-X

6） Choose where to put this in the start menu. You can change the menu name

manually. Or else the default value “SAIC GRADE-X”will be used. And then

click【Next】to continue. Shown as below：

7） Select the additional tasks and click 【Next】 to continue, shown as below:

8） Ready to install, click 【Install】to continue, shown as below:

SAIC GRADE-X

9） When the installation is complete, click 【Finish】 to exit

2. Software Registration

Please register SAIC GRADE-X software following the steps below.

(1) Make sure the computer connected to the Internet network correctly and normally.

（2）Start SAIC GRADE-X ，it will pop-up computer hardware information (this page

for the user run SAIC GRADE-X the first time. Users don’t need to register SAIC

GRADE_X again after registered successfully in the future). Shown as below.

（3）Please send computer hardware information (red info box above，copy this

identification) to Maxus administrator by mail or phone. Maxus administrator will

Table des matières

Autres manuels Bosch Équipement de diagnostic

Bosch

Bosch KTS 250 Manuel utilisateur

Bosch

Bosch MTS 6520 VCI Manuel utilisateur

Bosch

Bosch KTS 515 Caractéristiques techniques

Bosch

Bosch TPA 200 Manuel utilisateur

Bosch

Bosch TECH 2 Manuel utilisateur

Bosch

Bosch MTS 6531 Manuel utilisateur

Bosch

Bosch KTS Truck Manuel utilisateur

Bosch

Bosch TPA 300 Manuel utilisateur

Bosch

Bosch FSA 740 Manuel utilisateur

Bosch

Bosch Rexroth PS5000 Mode d'emploi

Bosch

Bosch FSA 500 Manuel utilisateur

Bosch

Bosch FSA 760 Manuel utilisateur

Bosch

Bosch RNM VI Manuel utilisateur

Bosch

Bosch FSA 740 Manuel utilisateur

Bosch

Bosch FWA 46 + Series Manuel utilisateur

Bosch

Bosch DCI 700 Guide de configuration

Bosch

Bosch FWA 4650 Manuel utilisateur

Bosch

Bosch EPS 118 Manuel utilisateur

Bosch

Bosch DCU 100 Manuel utilisateur

Bosch

Bosch MTS 6531 Manuel utilisateur

Bosch

Bosch Mastertech II VCI Manuel utilisateur

Bosch

Bosch BSA 43 Series Caractéristiques techniques

Bosch

Bosch FSA 740 Manuel utilisateur

Bosch

Bosch KTS 250 Manuel utilisateur

Manuels Équipement de diagnostic populaires d'autres marques

Mindray

Mindray M7Vet Guide de démarrage rapide

Autel

Autel MaxiProgrammer 201 Manuel utilisateur

TEXA

TEXA TMD2 Manuel utilisateur

Autel

Autel MaxiIM IM608 Manuel utilisateur

Sealey

Sealey BT2012 Manuel utilisateur

Diagnoptics

Diagnoptics Age Reader Manuel utilisateur

LAUNCH TECH

LAUNCH TECH X-431 PRO5 Manuel utilisateur

Hella Gutmann

Hella Gutmann Mega macs X Manuel utilisateur

Foxwell

Foxwell I80TS Manuel utilisateur

KaVo

KaVo 3D eXam Manuel utilisateur

ATEQ

ATEQ VT46 Manuel utilisateur

Hella Gutmann

Hella Gutmann mega macs X Manuel utilisateur

Autel

Autel MaxiFlash VCMI Manuel utilisateur

Qiagen

Qiagen QIAcube Connect MDx Manuel utilisateur

Alber

Alber BDSU Manuel utilisateur

St. Jude Medical

St. Jude Medical QUANTIEN Manuel utilisateur

Launch

Launch CNC-602A Manuel utilisateur

Innova

Innova 3568 Manuel utilisateur