
Sep-19 Product Code: BOD1906
Made in China to TQB Brands Pty Ltd specifications Page 4
Visit us at www.tqbbrands.com.au
ASSEMBLY, OPERATION, PREVENTITIVE MAINTENANCE
1. FEATURES
The Borum Industrial Oil Drainer is a multifunction oil drainer with 2m x 25.4mm discharge
hose. Discharge is by compressed air fitted with safety valve, 18 litre steel telescopic
collection pan, oil reservoir level indicator and small parts tray; it has heavy duty castors
for easy manoeuvrability.
2. ASSEMBLY
Unpacking: after removing the packing material, make sure the product is in perfect
condition and that there are no visible damaged parts. The packaging materials
(Polyethylene bags, polystyrene etc.), must be disposed of in an appropriate refuse
collection container. These materials must not be left within the reach of children as they
are potential sources of danger.
Assembly according to the exploded drawing, all connecting parts should be well sealed by
tape or seal glue, ensure all parts are tightened.
3. BEFORE USE
Prior to each use conduct a visual inspection by checking for abnormal conditions, such as
cracked joints and damaged, loose, or missing parts.
Air Supply
To prevent explosion:
Only use clean, dry, regulated, compressed air to operate this tool. Do not use oxygen,
carbon dioxide, combustible gases, or any other bottled gas as a power source for this
tool.
Note: Air flow, and therefore tool performance, can be hindered by undersized air
supply components. The compressor air hose must be long enough to reach the work
area.
Before connecting the air compressor to pressurise the Oil Extractor, run the air
compressor to make sure it is in good working order.
- Turn on the air compressor according to the manufacturer’s directions and allow
it to build up pressure until it cycles off.
- Adjust the air compressor’s pressure regulator so that the air output is enough to
properly power the tool, but the output will not exceed the tool’s maximum air
pressure at any time. Turn the knob clockwise to increase the pressure and
counter clockwise to decrease pressure. Adjust the pressure gradually, while
checking the air output gauge to set the pressure.
- Inspect the air connections for leaks. Repair any leaks found.
- If the compressor will not be used at this time, turn off the air supply and safely
discharge any residual air pressure to prevent accidental operation.