Bolymedia BG668 36MP Series Manuel utilisateur
Trail Cameras – BG668 36MP Series
User Manual
BG668 36MP Series
Trail Cameras – BG668 36MP Series
Table of Contents
1. Basic...........................................................................................- 1 -
1.1 General Description.......................................................... - 1 -
1.2 Product View..................................................................... - 2 -
2. Camera Operations................................................................ - 3 -
2.1 Batteries / Power Supply................................................. - 3 -
2.2 SD Card Information....................................................... - 3 -
2.3 SIM Card Information.....................................................- 4 -
2.4 Camera Modes.................................................................. - 5 -
2.5 Manual Image / Video Capturing..................................- 6 -
2.6 Manage Images and/or Videos...................................... - 6 -
2.7 Sending Images via MMS/GPRS/Molnus....................- 7 -
2.8 Trigger Modes.................................................................. - 8 -
2.9 Password Setup................................................................ - 9 -
3. Camera Setup Settings & Display...................................... - 10 -
3.1 Interface & Display Settings..........................................- 10 -
3.2 Mobile Communication................................................. - 11 -
3.3 Camera Setup Software................................................. - 12 -
3.4 Cloud Service - Molnus..................................................- 14 -
3.5 Mobile Applications....................................................... - 16 -
3.5.1 SMS Command List.................................................- 17 -
3.5.2 BG Tools Usage Instructions for Android App.. - 18 -
3.6 Camera Setup Options.................................................. - 22 -
4. Detection Ranges – PIR Detection Zones........................- 28 -
5. Technical Specifications......................................................- 29 -
6. Parts List................................................................................- 30 -
WARRANTY CARD.................................................................. - 31 -
Trail Cameras – BG668 36MP Series
- 1 -
1. Basic
1.1 General Description
BG668, a digital scouting camera with GPS and
communications functionality, is a digital infrared surveillance
camera that can be triggered by any human or animal
movement, monitored by a highly sensitive Passive Infrared
(PIR) motion sensor. After being triggered, the camera then
automatically captures high quality pictures (up to 36M pixels)
or records video clips (4K).
Password protection makes it impossible to enter the camera
without a password, helping to protect the data.
GPS automatic positioning function,add longitude and latitude
into image properties, can also send GPS information to
mobile phone or Email, for viewing camera location.
BG668-E36WG/BG668-AU36WG
Can send pictures instantly to your mobile device or videos
(less than 20M) to your e-mail via GPRS network.
BG668-V36WG/BG668-A36WG
Can only send pictures to your e-mail via GPRS network.
Trail Cameras – BG668 36MP Series
- 2 -
1.2 Product View
Fig. 1: Front View Fig. 2: Inner Panel View
Fig. 3: Bottom view
1
Antenna
2
Infrared LED
3
Lens
4
Microphone
5
Lock
6
PIR
7
Indication LED
8
Right
9
Up/Video
10
OK/Play
11
SD Card Slot
12
Left
13
SIM Card Slot
14
Down/Photo
15
Speaker
16
Power Switch
17
Menu
18
Shot
19
LCD display
20
Battery Tray
21
DC In
22
USB Port
23
Screw Hole
Trail Cameras – BG668 36MP Series
- 3 -
2. Camera Operations
2.1 Batteries / Power Supply
2.1.1 Powered by Batteries
①4 or 8 AA batteries
High-density, high-performance rechargeable or
non-rechargeable Alkaline batteries are recommended.
You can also use NiMH batteries as well, each battery
should be above 1.5V.
②5X18650 batteries
Need to use Pointed Head 18650 Battery.
2.1.2 Power Supply
A DC 6-Volt, 2 A external power supply adapter can also
be used to power the camera (not included).
2.2 SD Card Information
To take full advantage of the latest technologies, we
recommend Class 10 SD cards or better, which have
fast transfer speeds and long durability for extensive
shooting in the most extreme outdoor conditions. Some
SD cards are deemed Secure Digital High Capacity
(SDHC) PRO cards, which work with SDHC compatible
devices only. Please check that your product is
compatible with SDHC cards.
Insert the SD card into the camera before
turning on the camera
This camera supports up to a 32GB capacity SD card,
and has no built-in internal memory. The camera will
not function without the SD card properly inserted into
the camera.
Trail Cameras – BG668 36MP Series
- 4 -
Make sure the SD card is unlocked before
inserting it into the camera
If you experience any problems with an
inserted SD card
Try reformatting the SD card, utilizing the camera’s
main settings option.
2.3 SIM Card Information
Insert the SIM card into the camera before
turning on the camera
The camera SIM card slot is sized for a standard SIM
card. If you have a nano or micro size SIM card,
utilizing a SIM card adapter (included with most of our
cameras) will be required to connect your camera to the
cellular network via SIM card.
Supported 4G communication band
BG668-E36WG
FDD LTE: B1/B3/B5/B7/B8/B20
TDD LTE: B38/B40/B41
WCDMA: B1/B5/B8
GSM: 900/1800
BG668-AU36WG
LTE FDD: B1/B3/B4/B5/B7/B8/B28
LTE TDD: B40
WCDMA: B1/B2/B5/B8
GSM: B2/B3/B5/B8
Trail Cameras – BG668 36MP Series
- 5 -
BG668-A36WG
LTE FDD: B2/B4/B12
WCDMA: B2/B4/B5
BG668-V36WG
LTE FDD: B4/B13
Note: The camera will still function without a
SIM card. The SIM card is needed only for the
wireless/cellular messaging capabilities.
2.4 Camera Modes
The different modes are accessed by sliding the power
switch to the different positions marked on the camera.
The power switch is located inside the camera on the
bottom right of the LCD screen.
The different camera modes are as follows:
OFF Mode
Turns the camera off. The camera will still consume a
small amount of power while in “OFF” mode. It is
recommended to remove the batteries if the camera
will not be used for a long period of time.
TEST/SETUP Mode
In this mode, the camera allows you to customize the
camera settings or play back pictures and videos the
camera has taken on the LCD display.
In this mode, the camera will automatically shut
down after a few minutes of no operation.
ON Mode [ Hunting Mode ]
Trail Cameras – BG668 36MP Series
- 6 -
The camera will take pictures or record video when
motion is detected and/or at specific time intervals,
according to the programmed settings. After
switching the camera to the ON position, the red LED
motion indicator will blink for about 1 minute and
then turn off. This preset time allows you to adjust
the camera’s position if needed, before the camera
becomes active.
2.5 Manual Image / Video Capturing
Place the camera in TEST/SETUP mode and press the
“SHOT” button on the right of the control pad to
manually capture photos or record video.
Press “SHOT” again to stop capturing video.
2.6 Manage Images and/or Videos
Place the camera in TEST/SETUP mode and press the
“OK/Play” button to view images or videos. The latest
image or video will be shown on the LCD screen.
To view:
Press ▲or ▼to view the next or previous image or
video.Press “SHOT” to start a video.
To delete:
Press OK in Test/Setup Mode to enter into Playback
mode and access the pictures and videos. Press the ▲
or ▼to toggle between photos to find the photo(s) to
delete. Once selected, press the “MENU”button and
the options Del One and Del All appear. Press OK
Trail Cameras – BG668 36MP Series
- 7 -
when the Del One option is selected. Press OK again
to confirm you want to delete the picture or video
selected.
2.7 Sending Images via MMS/GPRS/Molnus
Images can be sent directly to your wireless device or
email, based on the Send Mode settings. Email and
wireless device information must be set up while the
camera is in TEST/SETUP mode. Images can be sent via
MMS/GPRS/Molnus when a correctly set up SIM card is
recognized, installed and the wireless signal strength is
adequate.
You have the options of Molnus,email MMS, email
GPRS, or phone MMS. To choose an option, enter the
TEST/SETUP mode, click the menu button and scroll
right until you reach the internet tab of the camera
settings. Videos will be sent in less than 20MP. （The
BG668-V36WG/BG668-A36WG will only have option:
Molnus,email GPRS）
To manually send a photo:
Put the camera in TEST/SETUP mode
Wait for the camera to acquire a network signal and
the SIM card to be recognized
indicates the SIM card is recognized by the camera.
indicates the SIM card is not recognized by the
camera or the SIM card is not working due to
connection/activation issues.
Take a manual photo by pressing the “SHOT” button
or press OK to view the photos stored on the camera
Trail Cameras – BG668 36MP Series
- 8 -
Find the picture you want to manually send
Press the MENU button to pull up the Send To:
option that is currently set in the camera settings
Press OK again to send the picture via the
messaging option chosen in your camera settings
The Send Mode settings will dictate what time you want
pictures sent to you. When in the ON mode, the options
“Daily Report” and “Instant” will be active, allowing you
to receive a daily report of all your photos taken or instant
messaging of your photos being taken (based on you
settings).
2.8 Trigger Modes
There are 3 different trigger modes for the camera: PIR
Trigger/Sensitivity, Time Lapse, and a combined
PIR/Time Lapse mode. These modes are activated by
three different menu options (PIR Trigger/Sensitivity,
PIR Interval, and Time Lapse).
PIR Trigger/Sensitivity
In this trigger mode, the camera will activate when
motion is detected. If the PIR Trigger/Sensitivity option is
set to OFF, the camera will not respond to any motion
within the camera’s trigger detection range.
Time Lapse
In this camera mode, the camera will activate at the set
time interval regardless of motion detection. If the Time
Lapse option is set to OFF, this trigger function will be
disabled.
Combined PIR/Time Lapse
Ce manuel convient aux modèles suivants
4
Table des matières
Autres manuels Bolymedia Caméra de repérage
Bolymedia
Bolymedia SG860U-12mHD Manuel utilisateur
Bolymedia
Bolymedia Pocket Camera SG565F-8mHD Manuel utilisateur
Bolymedia
Bolymedia SG565F Manuel utilisateur
Bolymedia
Bolymedia SG550M-12mHD Manuel utilisateur
Bolymedia
Bolymedia MG984G Manuel utilisateur
Bolymedia
Bolymedia SG560-8MHD Manuel utilisateur
Bolymedia
Bolymedia MG582-8M Manuel utilisateur
Bolymedia
Bolymedia SG370-6mHD Manuel utilisateur
Bolymedia
Bolymedia SG560K-8mHD Manuel utilisateur
Bolymedia
Bolymedia Pocket Camera SG560F Manuel utilisateur
