
SETUP mode:Switch the camera to SETUP
position to set camera ,manual capture ,playback
the photos and video clips or send MMS manually.
Hunting mode:Switch the camera to ON position
to hunt or monitor animals.When the animal or
human intrudes into the monitoring region,the
camera will take pictures or videos automatically
according to the previous programmed settings.
After switching the camera to ON position, the
motion indication LED (red) will blink for about 10
seconds. This time interval is for you to position the
camera for automatic surveillance operation,e.g. to
close the camera and lock it, to fix the camera on a
Off mode:Switch the camera to OFF position to
PIR Triggering:PIR triggering is the default
setting. The camera works only when motions get
detected, while, if PIR sensitivity is set as PIR OFF,
the camera stops PIR triggering.
Timer Triggering:The Timer Triggering is OFF
which means the timer triggering is disabled. While
changing the timer triggering interval to a non-zero
value, the camera starts to work at a preset interval.