Bolin Technology 2 Series Manuel utilisateur

2 Series HD SDI+IP

Dual Output USB PTZ Camera

USER MANUAL

VERSION: VCC-2HD-M-05022020

VCC-M2H5BI-4FN1

VCC-M2H10BI-4FN1

2 
Contents 
IMPORTANT INFORMATION ..................................................................................................................................................3 
WHAT’S IN THE BOX ..............................................................................................................................................................6 
OVERVIEW ............................................................................................................................................................................7 
CAMERA DIAGRAMS..............................................................................................................................................................8 
REMOTE CONTROLLER ........................................................................................................................................................................ 9 
SYSTEM CONFIGURATION....................................................................................................................................................10 
OBTAIN VIDEO SIGNAL ..................................................................................................................................................................... 11 
AUDIO IN /OUT ............................................................................................................................................................................ 14 
CAMERA CONTROL METHODS AND SYSTEM CONFIGURATIONS ...........................................................................................15 
USE THE INFRARED REMOTE CONTROLLER ............................................................................................................................................ 15 
USE RS-232 (VISCA)...................................................................................................................................................................... 15 
USE RS-422(VISCA) /RS485 (PELCO P/D) ..................................................................................................................................... 17 
RS422 (VISCA) CONNECTION ........................................................................................................................................................... 17 
PELCO P/DKEYBOARD RS485 CONNECTION ...................................................................................................................................... 19 
HOW TO MAKE THE CONNECTION WITH BOLIN PRODUCTS ...................................................................................................................... 21 
VISCA OVER IP CONTROL ................................................................................................................................................................. 21 
VISCA OVER IP NETWORK CONFIGURATION......................................................................................................................................... 21 
DIP SWITCH SETTINGS .........................................................................................................................................................22 
ADJUSTING AND SETTING WITH MENUS ..............................................................................................................................25 
EXPOSURE MENU ......................................................................................................................................................................... 26 
WHITE BALANCE MENU................................................................................................................................................................ 27 
PICTURE MENU............................................................................................................................................................................. 28 
PAN TILT ZOOM MENU................................................................................................................................................................. 28 
SYSTEM MENU.............................................................................................................................................................................. 29 
UPGRADING MCU FIRMWARE ........................................................................................................................................................... 30 
OPERATION USING THE INFRARED REMOTE CONTROLLER....................................................................................................30 
PAN/TILT AND ZOOM OPERATION ...................................................................................................................................................... 30 
OPERATING MULTIPLE CAMERAS WITH THE INFRARED REMOTE CONTROLLER.............................................................................................. 31 
ADJUSTING THE CAMERA................................................................................................................................................................... 31 
STORING THE CAMERA SETTINGS IN MEMORY —THE PRESETTINGFEATURE ............................................................................................... 32 
MENU CONFIGURATION ......................................................................................................................................................33 
DIMENSION.........................................................................................................................................................................34 
 
 
 

Operating Instructions

Thank you for purchasing our product. If there are any questions, please contact the authorized dealer.

Before operating the unit, please read this manualthoroughly and retain it for futurereference.

translated, or distributed in any form or by any means without prior consent in writing from our company.

Trademark Acknowledgement

and other Bolin's trademarks and logos are the property of Bolin Technology Other trademarks,

company names and product names contained in this manual are the property of their respective owners.

Trademarks and Registered Trademark Acknowledgement

•Microsoft, Windows, ActiveX, and Internet Explorer are registered trademarks of Microsoft Corporation in the

U.S. and/or other countries.

•HDMI, the HDMI logo and High-Definition Multimedia Interface are the trademarks or registered trademarks of

HDMI Licensing, LLC in the United States and other countries.

•The Software may contain h.264/AVC video technology, the use of which requires the following notice from

MPEG-LA, L.L.C.:

THIS SOFTWARE IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND

NON-COMMERCIAL USE OF A CONSUMER TO (I) ENCODE VIDEO IN COMPLIANCE WITH THE AVC

STANDARD ("AVC VIDEO") AND/OR (II) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER

ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO

PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR

ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE

http://www.mpegla.com.

•HEVC/h.265 Covered by one or more claims of patents listed at patentlist.hevcadvance.com

•HDBaseT is a trademark of the HDBaseT Alliance.

•ONVIF trademarks and logos are to be used per the guidelines established in this and other ONVIF policies and

documents including the ONVIF Rules of Membership and the ONVIF Logo Guidelines1.

•Other trademarks, company names and product names contained in this manual are the property of their respective

owners.

IMPORTANT INFORMATION

Legal Notice

Attention:

To ensure account security, please change the password after your first login. You are recommended to set a strong

password (no less than eight characters). Password login does not apply to some models that do not need password login.

The contents of this document are subject to change without prior notice. Updates will be added to the new version of this

manual. We will readily improve or update the products or procedures described in the manual.

Best effort has been made to verify the integrity and correctness of the contents in this document, but no statement, information,

or recommendation in this manual shall constitute formal guarantee of any kind, expressed or implied. We shall not be held

responsible for any technical or typographical errors in thismanual.

The product appearance shown in this manual is for reference only and may be different from the actual appearance of your

device.

This manual is a guide for multiple product models and so it is not intended for any specific product.

In this manual, the illustrations of displayed interface, parameters displayed, drawings and value ranges may vary with models.

Please see the actual product for details.

Due to uncertainties such as physical environment, discrepancy may exist between the actual values and reference values

provided in this manual.

Use of this document and the subsequent results shall be entirely on the user’s own responsibility.

Symbols

Symbol

Description

WARNING!

Contains important safety instructions and indicates situations that may cause bodilyinjury.

CAUTION!

User must be careful and improper operations may cause damage or malfunction ofproduct.

NOTE!

Indicates useful or supplemental informationabout the use of product.

Safety Information

WARNING!

Installation and removal of the unit and its accessories must be carried out by qualified personnel. You must read all of

the Safety Instructions supplied with your equipment before installation andoperation.

Warnings:

•If the product does not work properly, please contact your dealer. Never attempt to disassemble the camera yourself.

(We will not assume any responsibility for problems caused by unauthorized repair or maintenance.)

•This installation should be made by a qualified service person and should conform to all the local codes.

•When shipping, the camera should be packed in its originalpackaging.

•Make sure the power supply voltage is correct before using the camera.

•Do not drop the camera or subject it to physicalshock.

•Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth with a bit of ethanol and wipe it

gently. If the camera will not be used for an extended period of time, put on the lens cap to protect the sensor fromdirt.

•Do not aim the camera lens at the strong light such as sun or incandescent lamp. The strong light can cause fatal

damage to the camera.

Maintenance Precautions:

•If there is dust on the front glass surface, remove the dust gently using an oil-free brush or a rubber dust blowing

ball.

•If there is grease or a dust stain on the front glass surface, clean the glass surface gently from the center outward

using anti-static gloves or an oil-free cloth. If the grease or the stain still cannot be removed, use anti-static

gloves or an oil-free cloth dipped with detergent and clean the glass surface gently until it is removed.

•Do not use organic solvents, such as benzene or ethanol when cleaning the front glass surface.

Regulatory Compliance

FCC Part 15

This equipment has been tested and found to comply with the limits for digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received, including interference that may cause undesired operation.

LVD/EMC Directive

This product complies with the European Low Voltage Directive 2006/95/EC and EMC Directive

2004/108/EC.

WEEE Directive–2002/96/EC

The product this manual refers to is covered by the Waste Electrical & Electronic Equipment (WEEE)

Directive and must be disposed of in a responsible manner.

WHAT’S IN THE BOX

Note: The camera color may be in white or black per the item that is purchased.

Accessories (Optional)

Overview

This user guide is suitable for the following models:

VCC-M2H5BI-4FN1

VCC-M2H10BI-4FN1

Features

•Resolution: Up to 1080P60, 1080i59.94

•IP Resolution: Up to 1080P60, 1080P30

•USB Resolution: Up to 1080p30 adaptive

•Zoom: Optical 5X, 10X

•Video Output: HDMI, 3G-SDI, IP, USB2.0 simultaneous

•±350-degree continuous pan, ±120-degree continuous tilt

•128 presets, Speed up to 150 degrees/sec

•Standard mounting and ceiling mounting with E-Flip function

•Control supports RS-232 control, RS-422/485 control, VISCA-over-IP, IP-Onvif, , UVC, IR Remote

Controller

•Presets store camera directions and image parameters. (Up to 6 presets on remote controller or

128 presets via protocol programming.)

•Image parameter setting restore with presets and quick access operation

•IP Protocol RTSP, RTMP for online video streaming.

•Supports Audio input, Audio output with IP streaming.

•Power: DC 12V, PoE+(IEEE802.3at)

•Firmware upgrade via USB2.0

Camera Diagrams

1. 12V DC Power Port

Connect the supplied DC power adaptor and cord.

2. IP Network RJ45 Port

For VISCA over IP control and IP video streaming, with POE+(IEEE802.3at).

3. HDMI Port (HDMI 1.4)

4. 3G-SDI Video Output

5. USB Port

•For firmware upgrade.

•Used for audio input/output, USB port to 3.5mm audio jack adapter included.

6. RS232/RS422 Control Port (RJ45)

RJ45 to RS422 adapter cable is provided. (RS232 connection refers to user guide)

7. USB Connector (TYPE B)

USB2.0 video output.

8. Lens

This is a 5X/10X/20X magnification optical zoom lens

9. IR Remote Controller Sensors

These are sensors to receive commands from infrared remote controller.

10. Tripod mounting holes

11. Bottom DIP Switch

Remote Controller

1. Power

•Power ON the camera to turn the camera in operation

status.

•Power OFF the camera to turn the camera in

standby status.

•When the camera is powered OFF, the camera turns to

the back and would be on standby mode.

•When the camera is powered ON, the camera turns to

the front.

•Powering the camera ON/OFF would not restart the

camera.

2. Camera ID (Total 3) Selector

3. Preset Position (Total 6) Calling and Setting

4. PAN-TILT

•Pan and Tilt direction control

•HOME: Home position, Resolution reset

5. L/R Direction Set

•Left and right orientation setting

6. ZOOM/FOCUS

•Far

•Near

7. Auto/Manual Focus

8. Back Light

9. Video Format Switching

•You can change the video format by keep pressing

the button. (When video format is changed, the

camera would restart and the screen turns black

for few seconds.)

10. MENU

•On screen menu display ON/OFF

11. Audio Switch

•You can turn the Mic built in the camera Off/ON by pressing the button once.

12. Fast/Slow Zooming Speed Switching

13. White Balance

•Change the White Balance setting by pressing the button.

14. De-Flicker

•When you find the video flicking, press the button once to eliminate the flickers.

Notes

•3V CR2032 Coin lithium Battery is not included with the remote controller.

•3V CR2032 Coin lithium batteries are not re-changeable.

System Configuration

Connection

In this connection configuration, HDMI cable, SDI video cable, data cable, Network cable is required. To obtain these third-

party components or accessories,

Power

•Use only the DC power adaptor (JEITA type4) supplied with the unit. Do not use any

otherDC power adaptor.

•If using POE to power the camera, PoE+(IEEE802.3at) is supported

•Ensure that the POE power source has sufficient power budget to power the camera, or some features may not

function properly.

Cable Requirements

•Network Cable: 10/100 Mbps Ethernet CAT

5/5E/6 UTP cables are applicable to the

ANSI/EIA/TIA-568A/B and ISO/D. Eight

wires in the network cable need to be

inserted in parallel into the top of the cable

connector. The cable connector needs to be

crimped in position. When the cable

connector is in position, ensure that the metal

pieces of the cable connector are parallel to

each other and the clamp of the cable

connector is intact.

•SDI Cable: For broadcast use,

Belden1694A/5CFB is a suitable cable to

transmit broadcast-quality video:

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Bolin Technology Caméra de sécurité

Bolin Technology

Bolin Technology 8 Series Manuel utilisateur

Bolin Technology

Bolin Technology VCC-M2H10BI-4FN1 Manuel utilisateur

Bolin Technology

Bolin Technology KBD-1010 Manuel utilisateur

Bolin Technology

Bolin Technology FEX30BHD-RNP2 Manuel utilisateur

Bolin Technology

Bolin Technology VCC-7HD20S-3SMC Manuel utilisateur

Bolin Technology

Bolin Technology VCC-2HD10S-SN Manuel utilisateur

Bolin Technology

Bolin Technology EX1000 Series Manuel utilisateur

Bolin Technology

Bolin Technology BC-7 Series Manuel utilisateur

Bolin Technology

Bolin Technology D Series Manuel utilisateur

Bolin Technology

Bolin Technology VCC-7 Series Manuel utilisateur

Bolin Technology

Bolin Technology FEX Series Manuel utilisateur

Bolin Technology

Bolin Technology VCC-7HD30S-3SMC Manuel utilisateur

Bolin Technology

Bolin Technology 7 Series Manuel utilisateur

Bolin Technology

Bolin Technology D Series Manuel utilisateur

Bolin Technology

Bolin Technology BC-9 Series Manuel utilisateur

Bolin Technology

Bolin Technology VCC-8-4K20S-3SMB Manuel utilisateur

Bolin Technology

Bolin Technology D Series Manuel utilisateur

Bolin Technology

Bolin Technology BC-7-M-12262019 Manuel utilisateur

Bolin Technology

Bolin Technology VCC-4KHDB-M-11142018 Manuel utilisateur

Bolin Technology

Bolin Technology VCC-8HD20S-2SMC Manuel utilisateur

Bolin Technology

Bolin Technology SD5SN-M-10162017 Manuel utilisateur

Bolin Technology

Bolin Technology SD500 Series Manuel utilisateur

Bolin Technology

Bolin Technology EX1030SHD-B-L5SNAP1 Manuel utilisateur

Bolin Technology

Bolin Technology VCC-8-4K20S-3SM Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur