Bofan PT520 Manuel utilisateur
I
PT520
User manual
II
Catalogue
CATALOGUE ...................................................................................................................................................................................... II
COPYRIGHT AND DISCLAIMER ........................................................................................................................................ 1
1. BASIC DESCRIPTION ...................................................................................................................................................... 1
1.1 APPLICATION .......................................................................................................................................................................... 1
1.2 FUNCTION .............................................................................................................................................................................. 2
1.3 PACKING LIST ......................................................................................................................................................................... 2
1.4 SPECIFICATION ...................................................................................................................................................................... 3
2. INSTALLATION AND OPERATION ................................................................................................................................. 3
2.1 INSTALL THE POWER LINE ...................................................................................................................................................... 4
2.2 INSTALL THE SIM CARD ......................................................................................................................................................... 5
2.3 INSTALL ANTENNA .................................................................................................................................................................. 7
2.4 TURN ON THE TRACKER ......................................................................................................................................................... 8
2.5 REGISTER TERMINAL TO LIVEGTS TRACKING PLATFORM ..................................................................................................... 8
2.6 SET THE NECESSARY COMMAND ........................................................................................................................................... 9
2.7 START TRACKING ON LIVEGTS ........................................................................................................................................... 10
3. OPTIONAL ACCESSORIES .......................................................................................................................................... 12
3.1 OPTIONAL ACCESSORIES LIST ............................................................................................................................................. 12
3.2 ACCESSORIES CONNECTION ............................................................................................................................................... 12
4.SMS COMMANDS LIST .................................................................................................................................................. 13
1
Copyright and Disclaimer
Copyright © 2014 BOFAN Limited. User manual edition V1.0
Thank you very much for selecting BOFAN GPS tracker. Please read this user manual carefully before using it, to ensure
correct installation and operation.
The newest edition will be released with the newest product.
In no event shall BOFAN be liable for direct, indirect damages arising out of the use or inability to use the product.
Kindly reminder
The product is a wireless communication terminal, please cut off the power before entering into the oil
depot, dangerous places, and radio restricted area.
Do not locate product in the environment of rain or high temperature exposure when install and use terminal.
There will be not localization phenomenon caused by irresistible factors in usage, such as bad weather, the wireless
signal shield.
The product transmits data via wireless network. To get better signal, locate GSM antenna in open area
without metal shield.
The power voltage is 12VDC~24V, with maximum input 36VDC.
When installing, turn ACC OFF; Do not install or disassemble it when the power is on.
Please follow the instruction to install. Do not install the wire to such environment: high temperature or pressure and
etc. The place of exposed should be used the insulating tapes to parcel it well, so as to avoid the danger.
To ensure the safety of vehicle power, the power line has been installed with 5A/32V fuse.
1. Basic Description
1.1 Application
Vehicle real time tracking
Real time alarm report
Fleet management
Anti-steal
2
1.2 Function
Timing tracking
Fixed distance tracking
Turning angle tracking
Text message tracking
Input alarm
Low power supply alarm
Power cut off alarm
Over speed alarm
Hard accelerate alarm
Mileage alarm
Fatigue driving alarm
Fatigue driving relieve alarm
Monitor function
Camera function
1.3 Packing list
Main unit
1pc
GPS antenna
1pc
GSM antenna
1pc
Power line
1pc
Warranty card
1pc
Certificate
1pc
3
1.4 Specification
Basic information
Dimension 72(L)*53(W)*27(H)mm
Net weight 150g
Power supply DC 9V~36V/1.5A
Back-up battery 600mAh/3.7V
Power consumption 50mA standby current
Operating Temperature -10°C to +60°C
Storage Temperature -20°C to +70°C
Humidity Up to 75% non-condensing
LED GPS LED&GSM LED
Memory Save 16,000 waypoints
Motion sensor YES
IO Port
Digital input 2 digital input, 1 low-level effective, 1 high-level effective
Digital output 1 digital output
AD input 1ch*12Bits (0~6V)
MIC port YES
RS232 port YES
GSM
GSM frequency 850MHz/900MHz/1800MHz/1900MHz
Antenna External
Network GSM/GPRS
GPS
GPS Chip UBLOX 6
Antenna External
GPS sensitivity -162dBm
GPS channels 50
GPS cold start 29 sec
GPS warm start 27 sec
GPS hot start <1 sec
Positioning Accuracy 10meters at 2D RMS
2. Installation and operation
Do not tell the SMS password and SIM card number to others, so as to avoid the security settings be tampered
Do not connect the terminal with incompatible equipment
Ensure the SIM card supports GPRS function
CDMA network system is not supported.
During installation:
Please assure the ACC off first, then start to install the terminal
Please install or repair the terminal in the presence of professional workers
Please use the original accessory or recommended accessory by manufacture, so as not to damage the terminal
Please locate GPS antenna to open positions without the metallic shield, black side should be faced to the sky
Please locate GSM antenna to open positions without the metallic shield
4
Please install the terminal in the car, So as to keep dry
2.1 Install the power line
Fig.1 Port description
IO Power line Function Specification
1—DC Red cable Power input 9VDC~36VDC，Ext. Power(+)
2--GND Black cable GND Ext. Power(-)
3—SOS White cable SOS Low effective
4—IN2 Orange cable Input-2 High effective, default connects to ACC
5—OUT Yellow cable Output OC output, default connects to relay
6—AD Purple cable AD Analog input, range 0~12V
5
2.2 Install the SIM card
Fig.2 SIM card installation 1/5: Open the back shield
Fig.3 SIM card installation 2/5: Open SIM card slot
6
Fig.4 SIM card installation 3/5: Install SIM card
Fig.5 SIM card installation 4/5: Lock SIM card slot
7
Fig.6 SIM card installation 5/5: Install the back shield
2.3 Install Antenna
Fig.7 Install antenna
GPS antenna and GSM antenna installed as shown above, note:
The GSM antenna should be installed in the open position without metal shield, and should be away from of the
interference source of power supply.
The GPS antenna should be installed in the open position without metal shield, with the black-side facing up.
After installation, fix antenna with double-sided glue, to avoid antenna sliding to GPS/GSM signal blind area.
8
2.4 Turn on the tracker
When external power connected, terminal will power on automatically;
When testing without external power supply, press “Power Key” for at last 2seconds to power on terminal.
“Power Key” is descript as the following figure
Fig.8 Power key
GPS signal red light - indicating GPS signal status
Keep on, no flashing GPS module power supply issue, or no any data from GPS module
2s ON and 2s OFF GPS signal lost
0.1s ON and 2.9s OFF GPS fixed
0.1s ON and 0.1s OFF GPS antenna disconnected
GSM signal blue light - indicating GSM signal status
Keep on, no flashing GSM module issue, can’t receive any data and can’t read the SIM card
0.1s ON and 0.1s OFF GSM module is initializing
2s ON and 2s OFF GSM module is initialized, but network is not connected
0.1s ON and 2.9s OFF GSM module has been connected to network
2.5 Register terminal to LiveGTS tracking platform
Log in LiveGTS, click “Manage/Tracker config/ Add new tracker”, fill blank with tracker name, tracker ID, type, click "Modify"
to finish register.
Note: In order to ensure data identification correctly, the ID register in LiveGTS should be the same as terminal setting.
Table des matières
Autres manuels Bofan GPS
