BodyMed ZZRWAL03E Manuel utilisateur

Knee Walker

ZZRWAL03E

Instruction Manual

PRODUCT INTRODUCTION

The BodyMed®Knee Walker with Basket is a sturdy,

durable, and comfortable 4-wheel mobility aid that offers

patients suffering from a foot or ankle injury a smooth-

rolling alternative to crutches during their recovery.

Features

• Sleek, compact design

• Detachable features for easy installation,

carrying, and storage

• Adjustable handlebar height

• Adjustable knee pad height

• Foldable steering column

• Attachable basket for personal storage

• Front steering wheels

• Easily controllable dual back wheel brakes

• Washable, plush knee pad cover

Product Components

• Padded Contoured Knee Pad

• Handlebar with Anti-Slide Grips and Hand Brakes

• Height Adjustable Handlebar, 34”– 42”

• Height Adjustable Knee Pad, 17”– 21”

• Front and Back Wheels, 7.8” Diameter.

• Dual Back Wheel Brakes

• Sturdy Dual Bar Frame

• Attachable Basket

• Washable Knee Pad Cover

• Brake Line Clip

• Additional Assembly Components

Please read the following instructions carefully before use.

Double

Back Brakes

Padded

Contoured

Knee Pad

Height

Adjustable

Knee Pad

17” to 21”

Sturdy

Dual Bar Frame

Attached

Basket

7.8”

Wheels

Height Adjustable

Handlebar

34” to 42”

Anti Slip Grips

Product Specications

• Handlebar Adjustable Height: 34”– 42” (87 cm–107 cm)

• Knee Pad Adjustable Height: 17”– 21” (43 cm–53 cm)

• Max. Weight Capacity: 300 lb. (136 kg)

INSTALLATION

To assemble the knee walker, the following

components are required:

1.Front Frame with Front Wheels

2.Rear Frame with Back Wheels

3.Handlebar Attachment

4.Padded Contour Knee Pad Attachment

5.Attachable Basket with Mounting Hardware

(Two Screws, Mounting Bar, and Allen Wrench)

6.Washable Knee Pad Cover

7.Brake Cable Clip

8.Three (3) Knobs and Pins

Frame Assembly

1.Insert the dual rods of the front frame into the dual rods of

the rear frame.

2.Ensure the spring pin on the bottom rod of the front frame

locks into the matching hole in the bottom rod of the rear

frame.

3.Then attach one of the three knobs with a pin into the

available hole through the top rods.

4.Tighten the knob to secure.

5. Affix the braking

cable clip to the

rear frame to keep

the cable in place

during use.

Knee Pad Assembly and Height Adjustment

1.Insert the knee pad into the knee pad column.

2.Select the height, then attach the second of the three

knobs with a pin into the correct hole, locking the

height in place.

3.Tighten the knob to secure.

Steering Column Assembly and Disassembly

1.From the folded position, straighten the steering

column vertically.

2.Lock it in place by tightening the lever down at the

base of the column.

3.To fold the steering column, release the lever, and

push the column downward.

Handlebar Assembly and Height Adjustment

1.Insert the handlebar into the steering column.

2.Adjust to the correct height, then attach the final knob

with a pin into the correct hole, locking the height in place.

3.Tighten the knob to secure.

Basket Attachment

1.To install the basket, align the holes in the front

anchor plate located on the steering column with the

holes in the anchor section of the basket.

2.Place the mounting bar over the holes, then screw in

the two screws with the Allen wrench.

3.Tighten until the basket is secure.

Setting The Parking Brake

1.To set the parking brake, locate the spring pins on each

hand brake lever.

2.Grip each hand brake to activate the back-wheel brakes,

then push the spring pins down to lock the brakes in place.

3.To release the parking brake, grip each hand brake again,

causing the spring pins to release back to their original

position.

Brakes Test

Grip the hand brake levers on the handlebars tightly, and

test to ensure the brakes are working on the back wheels.

How To Use

1.Before use, set the

parking brake.

2.Place your hands on the

handlebars.

3.Position the knee of your

injured foot or ankle on

the center of the knee pad.

Your lower leg will rest on

the rear portion

of the pad.

4.Release the parking brake, and propel yourself backwards

and forwards using your other leg. Keep the knee of your

injured foot or ankle centered on the knee pad.

5.Move slowly so you can stop safely using your other leg.

6.Use the hand brakes as needed.

Table des matières

Autres manuels BodyMed Aide à la mobilité

BodyMed

BodyMed All-Terrain Knee Walker Manuel utilisateur

Manuels Aide à la mobilité populaires d'autres marques

Alber

Alber Scalamobil iQ Manuel utilisateur

Ferno

Ferno CCT-PX Manuel utilisateur

HEPRO

HEPRO Gripo Manuel utilisateur

Otto Bock

Otto Bock Pheon 3R62 Manuel utilisateur

NRS Healthcare

NRS Healthcare M11090 Manuel utilisateur

Medline

Medline MDS86835DSHEC Guide d'installation

Guldmann

Guldmann Twin Turner II Manuel utilisateur

Drive

Drive ROOMBA Manuel utilisateur

Gate

Gate Balder Manuel utilisateur

Decon wheel

Decon wheel TNS Notos Manuel utilisateur

ExoAtlet

ExoAtlet ExoAtlet-II Manuel utilisateur

Invacare

Invacare Storm Series Mode d’emploi

Rhythm Healthcare

Rhythm Healthcare B3800F Manuel utilisateur

AMF-BRUNS

AMF-BRUNS PROTEKTOR Manuel utilisateur

Drive DeVilbiss Healthcare

Drive DeVilbiss Healthcare OTTER Manuel utilisateur

Rhythm Healthcare

Rhythm Healthcare C500U Manuel utilisateur

Lumex

Lumex RJ4200A Manuel utilisateur

Rebotec

Rebotec Jumbo Manuel utilisateur