Installation Instructions
HPCCS
Indoor/Outdoor Line Voltage
Model Dependent
Max temp: 55C
Min. temp: -40C
DAMP LISTING
IP65
WET LISTING
IP68
Turn Power Off At Circuit Breaker Before Beginning Installation!
DO NOT LIFT FIXTURE BY CABLES!
INCLUDED IN THIS PACKAGE:
Mounting Brackets
(2 brackets per xture)
12
PAGE 2 OF 6
HPCCS Fixture
(In lengths shown on job specic drawings)
3Job Specic Drawings
AC100
Introduction:
The Boca Flasher’s HPCCS is perfect for color washing long runs and large areas. LEDs are spaced 1.00”apart in a two rows to create an
even wide wash of light. The housing is anodized aluminum and is weather and abrasion resistant. This light xture can use any standard
DMX 512 controller or can incorporate Boca Flasher’s Digital Mainframe controller (Demo Version Only). The Digital Mainframe can run
independently, creating many stand-alone color washing and solid color eects, as well as responding to DMX commands for total control of
your lighting experience.
Maintenance:
CLEANING Dry and Damp (IP65) Rated Fixtures: To clean surface use a soft damp cloth.
Wet (IP68) Rated Fixtures: To clean surface use a soft cloth with mild soap & water.
STORAGE Store in a dry, well-ventilated area when product is not in use.
Keep the electrical cord away from heated surfaces when in use or not in use.
If cord shows signs of damage do not use, return product to manufacturer.
Electrical Specifications:
1. Input Voltage: 90-120VAC or 230-277VAC
(See layout drawings for spec.)
2. Total linear ft per 20A breaker: 55 ft.
3. Total linear ft per 15A breaker: 40 ft.
4. Input Current: 272mA RMS per linear ft. for RGB,
272mA RMS per linear foot for WM
Power cord length is
6.5 ft. per UL standard.
DMX cables are
5 ft. long.
Fixtures must be installed by a
qualied and licensed electrician
in accordance with all national,
state and local electrical codes
and regulations. If any part of
this manual does not meet the
necessary codes and regulations,
contact the factory for more
information before attempting
to install.
Fixed
Hinged
or
Rotate Fixture to see
label on bottom.
