Bobrick B-828 Guide de configuration

Advisory Bulletin

TB-99 Cleaning and Maintenance For

Bobrick B-828 Automatic Counter-Mounted

Soap Dispenser

B-828

Quality soap dispensers require good quality soap and periodic maintenance to properly operate. For reliable

long-term use, perform regular maintenance for each unit. Most soap dispenser problems are caused by soap

that is too thick or corrosive, or by a lack of maintenance. If proper soap is being used, problems can still arise if

dispensers have never been cleaned. Bobrick recommends a viscosity of 100cps. With proper maintenance and

soap, Bobrick dispensers will provide long term, trouble free operation.

Warning: Only use soap designed speciﬁcally for foaming on the B-828 foam dispenser. Not doing so will result in

unit not operating properly, or can lead to total product failure.

Determine which unit you have:

DO NOT use abrasive or chemical cleaners (including chlorine bleach) to clean Spout, as it may dull the luster and attack the

chrome-plated exterior. Use ONLY mild soap and water, then wipe dry with clean cloth. While cleaning the bathroom counter top,

protect the Spout from any splattering of cleaner. Acids and cleaning ﬂuids will discolor or remove chrome plating.

Stem Mixer

Housing

Air Tube

Soap Tube

Air Tube

Adapter

Revised 5/2/19

Deactivate the soap dispenser by placing your ﬁnger over the Fiber Optic Sensor area while you clean. The

sensor is located just behind the Nozzle Tip. Once dispenser is cleaned, remove ﬁnger from the sensor area. Or

un-plug the Power Supply located on the bottom of the housing (LED will not light).

Daily cleaning:

• Using a soft, dry cloth wipe the exterior.

• If dispenser is really dirty gently wipe the dispenser with a cloth moistened with warm water and a

diluted neutral detergent. Remove the detergent with a soft damp cloth and then rub with a second soft,

dry cloth.

Monthly cleaning

• Remove Nozzle Tip and run under warm water.

• To remove Nozzle Tip for cleaning, cover the Sensor area with your ﬁnger to prevent dispensing of

soap. Turn Nozzle to the left to loosen. Rinse Nozzle under hot water to loosen any soap residue and

replace. Turn Nozzle to the right to tighten

• Place hand under Nozzle Tip to be sure soap is properly dispensed

Periodic cleaning (3 to 6 months)

• Gently wipe the dispenser with a cloth moistened with warm water and a diluted neutral detergent

• Clean area between Lid and Spout to keep Lid swing free of soap residue

• Flush the system when minimal amount of soap is left in the bottle

• Open the top-ﬁll door using the BobKey, rotate door clockwise

• Fill the dispenser with warm water.

• Press the Automatic Flush Button located on the bottom housing assembly, just above the Partition

Control Knob.

• Once unit is ﬂushed, Press the Automatic Flush Button again to stop dispensing.

• Fill unit with fresh soap.

• Place hand under Nozzle Tip to be sure soap is properly dispensed.

Nozzle Tip

Fiber Optic

Sensor

Nozzle Tip

Removable

Mesh Screen

Turn nozzle

to left to

loosen

Automatic

System

Flush

Button

TB-99 Revised 5/2/19

Table des matières

Autres manuels Bobrick Distributeur

Bobrick

Bobrick Designer B-840 Manuel utilisateur

Bobrick

Bobrick SureFlo B-8281 Manuel utilisateur

Bobrick

Bobrick ClassicSeries B-2111 Manuel d'utilisation et d'entretien

Bobrick

Bobrick Classic Series Manuel d'utilisation et d'entretien

Bobrick

Bobrick Designer Series Manuel de programmation

Bobrick

Bobrick Contura Series Manuel d'utilisation et d'entretien

Bobrick

Bobrick B-922 Manuel d'utilisation et d'entretien

Bobrick

Bobrick Classic Series Manuel utilisateur

Bobrick

Bobrick B-850 Manuel utilisateur

Bobrick

Bobrick B-72974 Mode d’emploi

Bobrick

Bobrick B-38030 Manuel d'utilisation et d'entretien

Bobrick

Bobrick B-72974 Mode d’emploi

Bobrick

Bobrick B-922 Manuel d'instructions

Bobrick

Bobrick B-824 Manuel d'instructions

Bobrick

Bobrick ConturaSeries B-4063 Manuel d'utilisation et d'entretien

Bobrick

Bobrick B-828 Mode d’emploi

Bobrick

Bobrick B-828 Manuel utilisateur

Bobrick

Bobrick RBA7730-860 Manuel utilisateur

Bobrick

Bobrick B-822 Series Manuel d'utilisation et d'entretien

Bobrick

Bobrick B-3574 Manuel d'instructions

Bobrick

Bobrick B-820-258 Manuel de programmation

Bobrick

Bobrick SureFlo B-8281 Manuel de programmation

Bobrick

Bobrick B-132 Mode d’emploi

Bobrick

Bobrick 82216 Manuel d'utilisation et d'entretien

Manuels Distributeur populaires d'autres marques

Silver King

Silver King Majestic SK12MAJ Guide de démarrage rapide

Franke

Franke F3Dn Twin Manuel utilisateur

STIEBEL ELTRON

STIEBEL ELTRON UltraHot Plus Manuel utilisateur

DAN DRYER

DAN DRYER 282 Manuel utilisateur

Essity

Essity Tork 473208 Manuel utilisateur

CBS

CBS SD300BU-88 Guide de configuration

Sealey

Sealey MK77 Manuel utilisateur

Fluid Management

Fluid Management Accutinter 1600 Manuel utilisateur

Franke

Franke DVS SD99-010 Manuel utilisateur

Graco

Graco Dispensit 1053-10C Guide de dépannage

ITALTINTO

ITALTINTO i50 Manuel utilisateur

Coca-Cola

Coca-Cola FREESTYLE 9000 Manuel utilisateur

Graco

Graco ProMix 2KE Mode d’emploi

TECHCON SYSTEMS

TECHCON SYSTEMS TS1251 Manuel utilisateur

Wayne

Wayne GLOBAL VISTA CNG Manuel utilisateur

clarsen

clarsen H133 Manuel utilisateur

PicoBrew

PicoBrew Zymatic Manuel utilisateur

BOWMAN

BOWMAN BP-007 Manuel utilisateur