Boardcon Idea3399 Manuel utilisateur

Idea3399 Reference User Manual

V2.201911

www.boardcon.com

Boardcon Embedded Design

Customize the embedded system based on YourIdea

1. Introduction

1.1. About this Manual

This manual is intended to provide the user with an overview of the board and benefits, complete features

specifications, and set up procedures. It contains important safety information as well.

1.2. Feedback and Update to this Manual

To help our customers make the most of our products, we are continually making additional and updated

resources available on the Boardcon website (www.boardcon.com | www.armdesigner.com).

These include manuals, application notes, programming examples, and updated software and hardware.

Check in periodically to see what’s new!

When we are prioritizing work on these updated resources, feedback from customers is the number one

influence, If you have questions, comments, or concerns about your product or project, please no

hesitate to contact us at support@armdesigner.com.

1.3. Limited Warranty

Boardcon warrants this product to be free of defects in material and workmanship for a period of one year

from date of buy. During this warranty period Boardcon will repair or replace the defective unit in

accordance with the following process:

A copy of the original invoice must be included when returning the defective unit to Boardcon. This limited

warranty does not cover damages resulting from lighting or other power surges, misuse, abuse,

abnormal conditions of operation, or attempts to alter or modify the function of the product.

This warranty is limited to the repair or replacement of the defective unit. In no event shall Boardcon be

liable or responsible for any loss or damages, including but not limited to any lost profits, incidental or

consequential damages, loss of business, or anticipatory profits arising from the use or inability to use

this product.

Repairs make after the expiration of the warranty period are subject to a repair charge and the cost of

return shipping. Please contact Boardcon to arrange for any repair service and to obtain repair charge

information.

 
 
2
Customize the embedded system based on YourIdea 
Content 
Idea3399 Introduction.....................................................................................................................3
1 Summary..............................................................................................................................3
2 Rockchip RK3399 Features .................................................................................................3
3 Idea3399 Specifications .......................................................................................................5
4 PCB Dimension....................................................................................................................7
5 Block Diagram......................................................................................................................7
6 Power meter.........................................................................................................................8
7 CPU Introduction..................................................................................................................8
Peripherals Introduction ...............................................................................................................15 
1 Power .................................................................................................................................15 
2 Audio I/O (J9, J8) ...............................................................................................................16 
3 USB Host (USB1)...............................................................................................................17 
4 HDMI OUT (J5) ..................................................................................................................18 
5 USB Type-C (J10, J11).......................................................................................................18 
6 miniDP (J7).........................................................................................................................20 
7 Ethernet (JP1) ....................................................................................................................20 
8 POE (J32) ..........................................................................................................................21 
9 Fan (J2)..............................................................................................................................21 
10 UART1/SPI0, UART3 (J13, J12) ......................................................................................22 
11 Keys (K1, K2, K3, KEY3)..................................................................................................22 
12 MIPI_DSI(CON1) .............................................................................................................23 
13 MIPI Camera (CON4, CON5)...........................................................................................23 
14 Debug (J4) .......................................................................................................................25 
15 4G & SIM (CON2, P2)......................................................................................................26 
16 SATA (CON3) ...................................................................................................................27 
17 Micro SD (J1) ...................................................................................................................29 
18 WiFi&Bluetooth (U8) ........................................................................................................29 
19 RTC (BT1)........................................................................................................................31 
20 Infrared Receiver(U3).......................................................................................................31 
Product Configurations .................................................................................................................32 
1 Standard Contents .............................................................................................................32 
2 Optional Parts ....................................................................................................................32 
 
 
 
 
 
 
 
 

Customize the embedded system based on YourIdea

1 Idea3399 Introduction

1.1 Summary

Idea3399 is equipped with RK3399 Cortex-A72 + Quad Cortex-A53 processor coupled with 4GB

RAM, 8GB eMMC, an mPCIe slot for cellular connectivity, and other interactive interfaces geared

towards to AI and IoT Applications.

Display features include a mDP port, HDMI and MIPI LCD. Idea3399 adopts ALC5651 dual I2S

interface audio codec that supports analog/digital input. The 2x USB3.0 Type C can be converted to

HDMI/USB3.0/USB2.0. In addition, Type C0 also can be used for debugging.

The board is available with a WiFi/BT module with dual-band 802.11ac/a/b/g/n and Bluetooth 4.1

connectivity.

The Idea3399 SBC is equipped with a 4G model(optional) that delivers 100Mbps downlink and

50Mbps uplink data rates, and GSM/GPRS networks to ensure that it can connect even in remote

areas devoid of 4G or 3G coverage. The model also combines high-speed wireless connectivity

with embedded multi-constellation high-sensitivity positioning GPS receiver.

1.2 Rockchip RK3399 Features

•Microprocessor

- Dual-core ARM Cortex-A72 up to 1.8G.

- Quad-core ARM Cortex-A53 up to 1.4G.

- 1MB unified L2 Cache for Big cluster, 512KB unified L2 Cache for Little cluster.

•Memory Organization

- On board memory

LPDDR4 up to 8GB.

EMMC4.51 up to 128GB.

- External memory.

SPI NOR

•Cortex-M0

- Two Cortex-M0 cooperate with Cortex-A72/Cortex-A53.

- Integrated sleep modes for low power consumption.

- Serial Wire Debug reduces the number of pins required for debugging.

•PWM

- Four on-chip PWMs with interrupt-based operation.

- Support capture mode and continuous mode or one-shot mode.

•Watchdog

- Three Watchdogs in SoC with 32 bits counter width.

•Interrupt Controller

- Support 8 PPI interrupt source and 148 SPI interrupt sources input.

- Support 16 software-triggered interrupts.

•3D Graphics Engine

Customize the embedded system based on YourIdea

- Arm Mali-T860MP4 GPU up to 4K supply.

- High performance OpenGL ES1.1/2.0/3.0, OpenCL1.2, DirectX11.1 etc.

- Provide MMU and L2 Cache with 256KB size

•Power unit

- RK818 on board.

- Compatible with multiple mode power supply.

Such as 3.7V/7.4V battery, single 3.3V DC or 3.3V/5V DC.

- Very low RTC consume current, less 7uA at 3V button Cell.

•Temperature

- Less 46°C run video play (exposed board at 20°C).

- Less 60°C run AnTuTu test (exposed board at 20°C)

Customize the embedded system based on YourIdea

1.3 Idea3399 Specifications

NVME SSD

optional

SIM Card 4G+GPS

optional Recover

Gigabit

Ethernet

Mini DP

Type-C1

Type-C0

HDMI USB

Host

Headphone

Power in

PWR&Battery

MIPI_RX

Camera, optional

Debug

MIPI

LCD AI-Audio IR SD

MIPI_TX/RX

Camera,optional

UART3

Recover

Power

Reset

UART1/SPI0

WiFi

antenna

Fan

RTC

POE

WiFi&BT

Feature

Specifications

CPU

· Rockchip RK3399. Big.Little architecture: Dual Cortex-A72 + Quad

Cortex-A53, 64-bit CPU

· 28nm HKMG process

· 1MB unified L2 Cache for Big cluster, 512KB unified L2 Cache for Little

cluster

GPU

· Mali-T864 GPU, OpenGL ES1.1/2.0/3.0/3.1, OpenVG1.1, OpenCL, DX11

Customize the embedded system based on YourIdea

· Supports AFBC (ARM Frame Buffer Compression)

Memory

4GB LPDDR4

iNAND

8GB eMMC

Power

DC 5V/3A or 3.7V Li-Battery

Ethernet

1000M High performance Ethernet (RTL8211E), RJ45 interface

MINI DP

1x mini Display Port

USB

1x USB2.0 Host, 2x USB3.0 Type C

HDMI

HDMI 1.4 and 2.0, support 4K, 1080P, 720P, 480P resolution

Audio

Adopt Realtek ALC5651 Audio CODEC.

3.5mm jack for headphone;

14-pin header for MIC Array.

PWR&Battery

2x5pin connector. 3.7V Li-Battery

MIPI

3x 26-pin headers.

MIPI RX for camera1, 13 Megapixels;

MIPI RX/TX for camera2, 13 Megapixels;

MIPI TX for MIPI LCD.

Micro SD

1x Micro SD Card slot

Support IR in

UART

4-wire UART1 (Multiplexed signal with GbE), 1x 8pin connector (J13);

3-wire UART2, 1x 3pin connector. For debug;

4-wire UART3(Multiplexed signal with GbE), 1x 4pin connector

SPI

1x 8pin connector (J13)

Buttons

4x Buttons for Recover (2x), Power and Reset

RTC

3V battery, CR1220

POE

2x4pin connector

3G/4G (optional)

52pins MINI PCI-E Socket. Support 3G/4G module

SSD(optional )

NVME SSD PCI.E X2

Camera (optional)

13 Megapixels, OV13850 model

WiFi&BT

Wireless-2.4GHz/5GHz 802.11 a/b/g/n/ac. Bluetooth 4.1

Dimension

135mm x 90mm

Customize the embedded system based on YourIdea

1.4 PCB Dimension

1.5 Block Diagram

RK808

PMU

POWER

RK3399

DRAM

RGMII

RTL8211E

TYPE C 1

1GB RJ45 CODEC

ALC5651

HP MIC

2T2R WIFI/BT

AP6356S Module

mDP OUT

Camera 1

O13850 13MPV

LPDDR4

4GB: K4E6E304EB

Camera 2

O3850V1 13MPMIPI LCD

SD SLOT

Micro

M RXIPI MIPI XRX/T MTXIPI USB 2.0 TYPE C 1 TYPE C 0

UART/SDIO PCIE X2 SD1 MDI I2S 0 eDP

2x32 bits

B2B

CM3399

1000 Mb Ethe netr

8GB eMMC

iNAND

SDIO

SIM

Socket

3G/4G

mPCI-E Socket

B2B

HDMI OUT

TMDS

2.4/5G 300Mbps< M.2 SLOT

TYPE C 0 Download

I2S

MEMS

MIC Array

AI Unit

SSD

I2S1

Customize the embedded system based on YourIdea

1.6 Power meter

Power

Operation

Temperature

°C

Connected devices

Electric

current

(A)

5V@3A

Android7.1.2

27 - 32

5V power

1.1

Power, 10.1-inch MIPI panel

2.2

Power, SD card, play 4K video, U-disk,

USB Mouse, debug serial, Ethernet,

10.1-inch MIPI panel, headphone,

WiFi&bluetooth, 4G, Fan

2.6

Power, SD card, play AnTuTu, U-disk,

USB Mouse, debug serial, Ethernet,

10.1-inch MIPI panel, headphone,

WiFi&bluetooth, 4G, Fan

2.9

1.7 CPU Introduction

CPU Module (CM3399) Specifications

Pin out: USB2.0 Host, USB3.0 OTG, UART, MIPI, Ethernet, SPI, HDMI out, I2C, I2S, PCI-E, SDIO,

SDMMC, eDP, Camera, PWM, ADC IN

Operating system: Android7.1.2

Application: AI devices such as IoT devices, intelligent interactive devices andS robots

Board size: 55mm x 50mm

Pin to Pin space: 1.3mm

Pin number: (52+49) x2 = 202pins

Layer: 8 Layers, complying with EMS/EMI

PCB Dimension

Customize the embedded system based on YourIdea

Pin Definition

Signal

Description

Alternate

functions

Voltage

SDMMC_CMD

SDMMC card command output and

response input

GPIO4_B5

3.0V

SDMMC0_DET_L

SDMMC card detect signal

(10K Pull H)

GPIO0_A7

1.8V

SDMMC_D0

SDMMC card data input and output

GPIO4_B0

3.0V

SDMMC_D1

SDMMC card data input and output

GPIO4_B1

3.0V

SDMMC_D2

SDMMC card data input and output

GPIO4_B2

3.0V

SDMMC_D3

SDMMC card data input and output

GPIO4_B3

3.0V

ADKEY_IN

10bit ADC input signal (10K Pull H)

ADIN1 &

Recover

1.8V

ADC_IN2

10bit ADC input signal

ADIN2

1.8V

LED1_AD1

Ethernet Speed LED(H)

3.3V

LED0_AD0_SPDIF-T

ETH Link LED(L) or Spdif TX

3.3V

GND

MDI0+_UART1-TX

ETH MD0+ or TXD1

3.3V

MDI0-_UART1-RX

ETH MD0- or RXD1

3.3V

MDI1+_SPI0-TXD

ETH MD1+ or SPI0TXD

3.3V

MDI1-_SPI0-CSn0

ETH MD1- or SPI0CS0

3.3V

MDI2+_SPI0-CLK

ETH MD2+ or SPI0CLK

3.3V

MDI2-_SPI0-RXD

ETH MD2- or SPI0RXD

3.3V

MDI3+_UART3-TX

ETH MD3+ or TXD3

3.3V

MDI3-_UART3-RX

ETH MD3- or RXD3

3.3V

BT_HOST_WAKE_L

Bluetooth device to wake-up HOST

GPIO0_A4

1.8V

GPIO1_A2

GPIO

1.8V

WIFI_REG_ON_H

WIFI Regulators power EN

GPIO0_B2

1.8V

WIFI_HOST_WAKE_L

WIFI to wake-up HOST

GPIO0_A3

1.8V

CIF_CLKOUT

Camera main clock output

GPIO2_B3

1.8V

OTP_OUT_H

Over temperature

GPIO1_A6

1.8V

I2C4_SCL

I2C serial clock line (Need pull H)

GPIO1_B4

1.8V

ALRT_H

Battery Gauge IC interrupt

GPIO1_C2

1.8V

I2C4_SDA

I2C data line (Need pull H)

/GPIO1_B3

1.8V

SPI1_CSn0

SPI first chip select signal

SPI1CS

/GPIO1_B2

1.8V

SPI1_TXD

SPI serial data output

SPI1TX /TXD4

/GPIO1_B0

1.8V

GPIO1_A1

GPIO

1.8V

BT_REG_ON_H

Bluetooth power on

1.8V

SPI1_CLK

SPI serial clock

SPI1CLK

/GPIO1_B1

1.8V

Table des matières

Autres manuels Boardcon Ordinateur monocarte

Boardcon

Boardcon EM3399 Manuel utilisateur

Manuels Ordinateur monocarte populaires d'autres marques

WIN Enterprises

WIN Enterprises PL-80910 Manuel utilisateur

AXIOMTEK

AXIOMTEK SBC81206 Series Manuel utilisateur

Embest

Embest SOM-PH8800 Manuel utilisateur

SeaLevel

SeaLevel SBC-R9 Manuel utilisateur

SMART Embedded Computing

SMART Embedded Computing ATCA-8310 Manuel utilisateur

WinSystems

WinSystems PPM-LX800-G Manuel utilisateur

GIGAIPC

GIGAIPC QBiX-PPC Series Manuel utilisateur

OLIMEX

OLIMEX A10S-OLinuXino-MICRO Manuel utilisateur

Commell

Commell FS-978 Manuel utilisateur

GIGAIPC

GIGAIPC QBiP-8665A/ Manuel utilisateur

VersaLogic

VersaLogic Python EBX-11 Manuel utilisateur

Micro Computer Specialists

Micro Computer Specialists IRV-3702 Manuel utilisateur

CompuLab

CompuLab SB-A510 Manuel utilisateur

Boser

Boser HS-7321 Manuel utilisateur

Premier Farnell

Premier Farnell Embest SBC8530 Manuel utilisateur

MicroSys Electronics

MicroSys Electronics miriac SBC-LS1043A2 Manuel utilisateur

Aaeon

Aaeon UP Manuel utilisateur

Portwell

Portwell WUX Series Manuel utilisateur