BMW 65 12 2 182 508 Manuel utilisateur

01 29 2 221 219 5/2012© BMW AG, Munich (Z/Z) 1

Original BMW Accessories.

Installation Instructions.

5/2012

DVD Changer Retrofit

BMW 6 Series (F06, F

12, F

13)

These instructions are only valid for cars with SA 7SP (BMW Professional navigation system with

integrated Bluetooth mobile phone preparation) or with SA 609 (BMW Professional navigation

system).

Retrofit kit number

65 12 2 183 731 DVD changer retrofit kit

65 12 2 182 508 Video switch retrofit kit

Installation time

The installation time is 3.0 hours. If the video switch retrofit kit needs to be installed, the installation time will

increase by 1.5 hours. This may vary depending on the condition of the car and the equipment in it.

The installation time specified does not include the time spent on programming/coding. The calculation of the total

costs for the programming time must be factored into the calculation of retrofitting costs (no invoicing via warranty).

Important information

These installation instructions are primarily designed for use within the BMW dealership organisation and by

authorised BMW service companies.

In any event, the target group for these installation instructions is specialist personnel trained on BMW cars with

the appropriate specialist knowledge.

All work must be completed using the latest BMW repair manuals, wiring diagrams, servicing manuals and work

instructions, in a rational order, using the prescribed tools (special tools) and observing current health and safety

regulations.

In the event of any installation or functional problems, restrict the troubleshooting session to about

0.5 hours for mechanical work or 1 hour for electrical work.

To avoid unnecessary extra work and/or costs, an inquiry is to be sent straight away to the technical parts support

via the After Sales Assistance Portal (ASAP).

Quote the following information:

- Chassis number,

- Retrofit kit part number,

- A detailed description of the problem,

-Any work already carried out.

Do not archive the hard copy of these installation instructions since daily updates are made via ASAP!

Pictograms

Denotes instructions that draw your attention to dangers.

Denotes instructions that draw your attention to special features.

Denotes the end of the instruction or warning text.

5/201201 29 2 221 219© BMW AG, Munich (Z/Z) 2

Installation information

When routing fibre optic cables, make sure the bending radius is no less than 25 mm.

Refer to the instructions for handling fibre optic cables acc. to ISTA No. 61 00 ....

Ensure that the cables and/or lines are not kinked or damaged as you install them in the car. Costs arising from this

will not be reimbursed by BMW AG.

Additional cables/lines that you install must be secured with cable ties.

If the specified PIN chambers are occupied, bridges, double crimps or twin-lead terminals must be used.

All pictures show LHD cars; proceed accordingly on RHD cars.

After the installation work, the retrofit must be programmed/coded via the – Conversions – path.

The video switch retrofit kit must only be installed if input 3 on the radio receiver is occupied or in cars with RSE

(for the assignment of inputs on the radio receiver, see the section entitled "Information on pin assignment on the

radio receiver" at the end of these installation instructions). Special tools required

Ordering instructions

DVD changer B and the cable tie with holder I are not part of the retrofit kit and must be ordered separately (for part

numbers and instructions, see EPC).

If the video switch retrofit kit is installed, video switch AA must be ordered separately (for the part number and

instructions, see the EPC).

List of special equipment

The following special equipment must be taken into consideration when installing the retrofit kit:

SA 3AG Rear view camera

SA 6UK Night vision with person recognition

SA 5DL Surround view

SA 601 TV function

SA 609 Professional navigation system

SA 7SP Professional navigation system with integrated Bluetooth mobile phone preparation

Special tools required

00 9 317, Installation wedge

54 3 120, Support

Table of contents

Section Page

1 DVD changer parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2 Video switch parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

3 Preparatory work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

4 DVD changer retrofit cable connection diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

5 Video switch connection diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

6 Adapter cable connection diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

7 LHD DVD changer installation and cabling diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

8 RHD DVD changer installation and cabling diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

9 Video switch installation and cabling diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

10 Installing and connecting the video switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

11 Routing and connecting the DVD changer retrofit cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

12 Installing and connecting the DVD changer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

13 Concluding work and programming/coding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

14 DVD changer wiring diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

15 Video switch wiring diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

16 DVD changer/TV/camera adapter cable wiring diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

17 Information on pin assignment on the radio receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

5/201201 29 2 221 219© BMW AG, Munich (Z/Z) 4

Legend

ADVD changer retrofit cable

BDVD changer (not supplied with the retrofit kit)

CMount

DScrews (4 x)

ECable tie 200 x 3.6 mm (10 x)

FMiniature connector

G7.5 A fuse

HSocket casing (SW 12-pin)

ICable tie with holder (not supplied with the retrofit kit)

J5 A fuse (not required)

KCover (2 x)

E F G JH I

B C D

F12 0014 Z

1. DVD changer parts list

5/201201 29 2 221 219© BMW AG, Munich (Z/Z) 5

Legend

AA Video switch (not supplied with the retrofit kit)

AB Video switch retrofit cable

AC DVD changer adapter cable

AD SW 3-pin socket casing

AE TV adapter cable

AF RT/GE additional cable (not required)

AG Video switch power supply RT/SW additional cable (not required)

AH Hexagon nut M6

AI 5A fuse

AJ Miniature connector (2 x)

AK Cable tie (20 x)

AL 10 A fuse (not required)

AB AF AGAEADAC

AJAI AL

AH 010 0080 Z

2. Video switch parts list

5/201201 29 2 221 219© BMW AG, Munich (Z/Z) 6

ISTA No.

Conduct a brief test

Move the soft top compartment lid to the service position (F12 cars only) 51 00 ...

Disconnect the negative pole of the battery 61 20 900

The following components must be removed first of all

Radio receiver 62 12 210

Glove box 51 16 366

Trim for the bottom right of the dashboard 51 45 184

Side footwell trim on right A pillar 51 43 075

Front right sill cover strip 51 47 000

Rear seat 52 24 005

Back rest for rear seat 52 24 010

Rear right side trim panel 51 43 002

Luggage compartment wheel arch trim, right 51 47 161

Loosen power distribution box, rear right 61 13 042

Only where the video switch is installed

Side footwell trim on the left A pillar 51 43 070

Pedal trim 51 45 184

Front left door sill cover strip 51 47 000

Rear left side trim 51 43 002

Luggage compartment wheel arch trim, left 51 47 151

3. Preparatory work

5/201201 29 2 221 219© BMW AG, Munich (Z/Z) 7

Item Designation Signal Cable colour/

Cross-section

Connection location in the car Abbreviation/Slot

A DVD changer retrofit cable --- --- --- ---

A1 Socket casing (SW 12-pin) --- --- To DVD changer BA23

A2 Eyelet Terminal

31L

0.75 mm2

To ground support point on A pillar bottom

right

Z10*6B

A3 Socket contact Terminal

30B

RT/GR

0.75 mm2

To rear right power distribution box Z2*10B

PIN 9

A4 Socket contact 58G GR/RT

0.35 mm2

To footwell module A58*1B

PIN 21

A5 Socket contact FBAS_+ BL

0.35 mm2

Cars with free input 3 on the radio

receiver only

To r ad i o r e c e i v e r

Only cars with occupied input 3 on the

radio receiver or with RSE

To s o c ke t c a s i n g AD

A42*1B

PIN 21

PIN 1

A6 Socket contact FBAS_- WS

0.35 mm2

Cars with free input 3 on the radio

receiver only

To r ad i o r e c e i v e r

Only cars with occupied input 3 on the

radio receiver or with RSE

To s o c ke t c a s i n g AD

A42*1B

PIN 24

PIN 2

A7 Socket contact FBAS_

shield

Shield

0.26 mm2

Cars with free input 3 on the radio

receiver only

To r ad i o r e c e i v e r

Only cars with occupied input 3 on the

radio receiver or with RSE

To s o c ke t c a s i n g AD

A42*1B

PIN 23

PIN 3

A8 Fibre-optic cable MOST OR

1.0 mm2

To radio receiver A42*2B

PIN 2

A9 Fibre-optic cable connector MOST GN

1.0 mm2

To t h e r ad i o

receiversdisconnectedfibreopticcable'

A42*2B

A1 A8

F01 0152 Z

4. DVD changer retrofit cable connection diagram

5/201201 29 2 221 219© BMW AG, Munich (Z/Z) 8

Item Designation Signal Cable colour/

Cross-section

Connection location in the car Abbreviation/Slot

AB Video switch retrofit cable --- --- --- ---

AB1 SW 54-pin socket casing --- --- To video switch AA A40*1B

AB2 Cable open CAN_H OR/GN

0.35 mm2

To the same colour on the radio plug using

miniature connector AJ

A42*1B

AB3 Cable open CAN_L GN

0.35 mm2

To the same colour on the radio plug using

miniature connector AJ

A42*1B

AB4 Socket contact FBAS_+ BL

0.35 mm2

To radio receiver A42*1B

PIN 18

AB5 Socket contact FBAS_- WS

0.35 mm2

To radio receiver A42*1B

PIN 28

AB6 Socket contact FBAS_

shield

Shield

0.26 mm2

To radio receiver A42*1B

PIN 27

AB7 Socket contact Terminal

30B

RT/SW

0.50 mm2

To rear right fuse box Z2*10B

PIN 10

AB8 Ring eyelet M6 Terminal 31 BR

0.50 mm2

To ground support point in the left luggage

compartment

Z10*12B

AB1

AB8

AB7

AB6

AB5

AB4

AB3 AB2

F12 0018 Z

5. Video switch connection diagram

5/201201 29 2 221 219© BMW AG, Munich (Z/Z) 9

Item Designation Signal Cable colour/

Cross-section

Connection location in the car Abbreviation/Slot

AC DVD changer adapter cable

AC1 Socket contact FBAS_+ BL

0.35 mm2