BMW Multi Tool Manuel utilisateur
BMW Multi Tool User Manual
BMW Multi Tool User Manual
2
Table of Contents
1. Safety Precautions and Warnings................................................................................3
2. General Information......................................................................................................4
3. Hardware Overview......................................................................................................5
3.1. Tool Description.................................................................................................5
3.2. Specifications.....................................................................................................6
3.3. System Requirements.......................................................................................7
4. Software Overview .......................................................................................................8
4.1. Overview............................................................................................................8
4.2. Function...........................................................................................................11
5. Troubleshooting..........................................................................................................30
5.1. “Device not connected”Error ...........................................................................30
6. Warranty and Service.................................................................................................31
6.1. Limited One Year Warranty .............................................................................31
6.2. Service Procedures.........................................................................................35
BMW Multi Tool User Manual
3
1.Safety Precautions and Warnings
To prevent personal injury or damage to vehicles and/or the tool, read
this instruction manual first and observe the following safety
precautions at a minimum whenever working on a vehicle:
Always perform automotive testing in a safe environment.
Wear safety eye protection that meets ANSI standards.
Keep clothing, hair, hands, tools, test equipment, etc. away from all moving
or hot engine parts.
Operate the vehicle in a well ventilated work area: Exhaust gases are
poisonous.
Put blocks in front of the drive wheels and never leave the vehicle
unattended while running tests.
Use extreme caution when working around the ignition coil, distributor cap,
ignition wires and spark plugs. These components create hazardous
voltages when the engine is running.
Put the transmission in PARK (for automatic transmission) or NEUTRAL
(for manual transmission) and make sure the parking brake is engaged.
Keep a fire extinguisher suitable for gasoline/chemical/electrical fires
nearby.
Don’t connect or disconnect any test equipment while the ignition is on or
the engine is running.
Keep the tool dry, clean, free from oil/water or grease. Use a mild
detergent on a clean cloth to clean the outside of the scan tool, when
necessary.
BMW Multi Tool User Manual
4
2.General Information
Thank you for choosing BMW Multi Tool.
This manual includes the use of equipment notes, please read this manual
carefully before use so that you can correctly use it.
All rights reserved. No part of this publication may be reproduced, stored in a retrieval
system, or transmitted, in any form, or by any means, mechanical, electronic,
photocopying, recording, or otherwise, without the prior written permission.
All copyright and trademarks acknowledged.
No patent liability is assumed with respect to the use of the information contained
herein. Moreover, because we is constantly striving to improve its high-quality products,
the information contained in this manual is subject to change without notice. Every
precaution has been taken in the preparation of this manual. Nevertheless, we
assumes no responsibility for errors or omissions. Neither is any liability assumed for
damages resulting from the use of the information contained in this publication.
BMW Multi Tool User Manual
5
3.Hardware Overview
3.1.Tool Description
ITEM
Description
❶
OBD II CONNECTOR
Connects the tool to the vehicle’s Data Link connector (DLC).
❷
Dongle
USB dongle.
❸
USB CONNECTOR
Connects the tool to the PC/Laptop through USB Cable.
❹
Programmer
Program keys.
❺
Programmer Female Pin
Connects programmer to device.
❻
Programmer Male Pin
Connects programmer to device.
BMW Multi Tool User Manual
6
3.2.Specifications
ITEM
Description
Operating Temperature
-20 to 70 °C ( -4 to 158 °F )
Storage Temperature
-40 to 85 °C ( -40 to 185 °F )
Diagnostic Interface
16 PIN
USB Interface
USB 2.0
Power
DC 5 V - 12 V
Consumption
1 W
Dimensions
Length
95 mm(3.74″)
Width
49 mm(1.93″)
Height
28 mm(1.10″)
Net Weight
85 g
Gross Weight
223 g
BMW Multi Tool User Manual
7
3.3.System Requirements
PC/Laptop Minimum Specification
Minimum Specification
Recommended Specification
CPU
Pentium 3/1GHz or above
Pentium 4/1.6GHz or above
Memory(RAM)
512M or above
1G or above
HDD
40G or above
60G or above
Display
800 x 600 or above
1024 x 768 or above
OS
Win98/2000/XP/Vista
WinXP
Port
USB
USB
BMW Multi Tool User Manual
8
4.Software Overview
4.1.Overview
BMW Multi Tool includes forth parts, hardware device, dongle, programmer,
software. Before running software you must connect dongle and hardware
device to computer.
1. OBD II: BMW Multi Tool connects to car directly.
2. CAS PLUG: Connect CAN line manually, support 12V. Detail method followed in next
page.
3. Support EEPROM dump: get EEPROM dump with programmer.
BMW Multi Tool User Manual
9
1. 7 Series CAS1/CAS2 pin method:
2. CAS2(While Box)/CAS3/CAS3+ pin method:
BMW Multi Tool User Manual
10
3. Device pin method:
Table des matières
Autres manuels BMW Accessoires automobiles
BMW
BMW Advanced Car Eye Manuel utilisateur
BMW
BMW F30 Guide d'installation
BMW
BMW B84 02 03 Manuel utilisateur
BMW
BMW Wallbox Manuel utilisateur
BMW
BMW X5 (E53) LHD Manuel utilisateur
BMW
BMW AccessPORT Manuel utilisateur
BMW
BMW 84 64 0 025 819 Manuel utilisateur
BMW
BMW CMT 3000VR Manuel utilisateur
BMW
BMW AG/ICOM Manuel utilisateur
BMW
BMW 01 29 0 007 613 Manuel utilisateur
BMW
BMW Wireless Charging Station Universal Manuel utilisateur
BMW
BMW 84 61 0 028 926 Manuel utilisateur
BMW
BMW SA655 Manuel utilisateur
BMW
BMW 84 64 0 153 226 Manuel utilisateur
BMW
BMW 84 63 0 017 895 Manuel utilisateur
BMW
BMW Universal Bluetooth Manuel utilisateur
BMW
BMW 11 12 2 157 664 Manuel utilisateur
BMW
BMW 325i 1991 Manuel de programmation
BMW
BMW 84 64 0 441 949 Manuel utilisateur
BMW
BMW 54 13 086 Mode d’emploi
