BMG WALKER Manuel utilisateur

WALKER

STEP-THRU

Owner's Manual

Content

About Manual ································································································································································································································································ 1

Product Specification ··························································································································································································· 2

Product Structure································································································································································································· 3

Safety Checklist ···································································································································································································· 4

Assembly Instructions ··········································································································· ··················· 6

Recommended Torque Values ································································································································································································································· 8

Display Features ····························································································································································································································································9

Routine Operation ······························································································································································································ 11

Driving Range ···································································································································································································· 12

Parking Storage and Transport ··········································································································································································· 13

Basic Battery Charging Tips ················································································································································································ 14

Bicycle Care········································································································································································································ 15

Basic Troubleshooting ························································································································································································ 16

Warranty Info ··································· ···························································································· ····· 18

Additional Warranty Terms ···································································································································································································································· 19

About Manual

This manual contains details of the product, information on its operation and maintenance, and other helpful tips for owners. Read it carefully

and familiarize yourself with the WALKER Breeze Step-Thru before using it to ensure safe use and prevent tragic accidents. Be sure to retain

this manual as your convenient WALKER Breeze Step-Thru information source.

All information in this manual should be carefully reviewed and if you have any questions you should contact WALKER Bike immediately. The

notes contained within the manual and marked by this dialogue balloons symbol should also be given special care. Users should also pay

special attention to information marked in this manual beginning with NOTICE.

Because it is impossible to anticipate every situation or condition which can occur while riding, this manual makes no representations about the

safe use of bicycles under all conditions. There are risks associated with the use of any bicycle which cannot be predicted or avoided, and which

are the sole responsibility of the rider. You should keep this manual, along with any other documents that were included with your bicycle, for

future reference, however all content in this manual is subject to change or withdrawal without notice. Visit www.WALKERbike.com to

download the latest version. WALKER Bike makes every effort to ensure the accuracy of its documentation and assumes no responsibility or

liability if any errors or inaccuracies appear within. Assembly and first adjustment of your WALKER Bike require special tools and skills and it is

recommended that this should be done by a trained bicycle mechanic if possible.

Product Specification 2

Battery 48V 16Ah Samsung Lithium Battery Front Fork Front Suspension Fork

Motor 500W High Speed Brushless Geared Motor Bike Frame 6061 Aluminum

Display LCD Display Brake Tektro Aries 180mm Brakes

Derailleur Shimano 7 Speed Charger US Standard 3.0A Smart Quick Charger

Speed 20 MPH Freewheel Shimano 7 Speed

Pedal Assist Intelligent 5-level Pedal Assist Shifter Shimano

Throttle Half Twist Throttle Tires

Charging Time 5~6 Hours Product Weight 62 lbs

Recommended

Rider Heights Total Payload

Capacity 300 lbs

Product Structure 3

Handle 11 LED Head Light

On/Off 12 Front Fork

LCD Display 13 Front Brake

Shimano Shifter 14 Tire

Throttle 15 Pedal

Brake Lever 16 Controller

LED Rear Light 17 Derailleur

Rear Rack 18 Motor

Saddle 19 Rear Brake

10 Battery

Safety Checklist 4

Safety Check Basic Steps

Brakes

· Ensure front and rear brakes work properly.

· Ensure brake pads are not over worn and are correctly positioned in relation to the rims.

· Ensure brake control cables are lubricated, correctly adjusted and display no obvious wear.

· Ensure brake control levers are lubricated and tightly secured to the handlebars.

Wheels and Tires

· Ensure tires are in lated to within the recommended limits displayed on the tire sidewalls.

· Ensure tires have tread and have no BULGES OR EXCESSIVE WEAR.

· Ensure rims run true and have no obvious wobbles or kinks.

· Ensure all wheel spokes are tight and not broken.

Steering · Ensure handlebar and stem are correctly adjusted and tightened, and allow proper steering.

· Ensure the handlebar is set correctly in relation to the forks and the direction of travel.

NOTICE: Before every ride it is important to carry out the following safety checks.

Safety Checklist

Safety Check Basic Steps

Chain · Ensure the chain is oiled, clean and runs smoothly.

· Extra care is required in wet or dusty conditions.

Cranks and Pedals · Ensure pedals are securely tightened to the cranks.

· Ensure the cranks are securely tightened and are not bent.

Derailleurs

· Check that the derailleur(s) are adjusted and functioning properly.

· Ensure shift and brake levers are attached to the handlebar securely.

· Ensure all brake and shift cables are properly lubricated.

Motor Drive Assembly

and Throttle

· Ensure the hub motor is spinning smoothly and the motor bearings are in good working order.

· Ensure all power cables running to the hub motor are secured and undamaged.

· Make sure the hub motor axle bolts are secured and all torque arms and torque washers are in place.

Battery Pack

· Ensure battery is charged before use.

· Ensure there is no damage to the battery pack.

· Lock battery to frame and check to see that it is secured.

Assembly Instructions 6

Step 1 : Install the handle bars. Remove the four screws from the stem, ensuring the linear markings on the handlebars are centered and

handlebars are adjusted to a comfortable position. Finally, tighten the screws with the assembly tool.

Step 2 : Install the front wheel. Remove the plastic axle guards from the front wheel being sure not to touch the brake rotor set. O pen the quick

skewer and remove the thumb nut and cone spring. Carefully lower the fork and ensure the brake rotor goes into the caliper. Next align

the dropouts with the axle of the wheel hub to make sure the fork dropouts are fully seated on the axle. Install the quick skewer starting

from the brake rotor side of the wheel and then push the quick release skewer through the hub. Keep two cone springs pointed towards

the wheel hub. Tighten the thumb nut until the quick release lever is held in line with the axle, and then use your palm of y our hand to

close the quick release skewer.

Step 3 : Install fenders&headlight. Attach the front fender and the headlight by the screw.

Step 4 : Use a bike pump with a press gauge to in late tires to desired PSI. The recommended pressure for this model is 30 PSI (2.0 Bar). Do not

over in late or under in late tires.

NOTICE: The following assembly steps are only a general guide to assist in the assembly of your WALKER Bike and is not a

complete or comprehensive manual of all aspects of assembly, maintenance and repair. We recommend you consult a certified

bicycle mechanic to assist in the assembly, repair and maintenance of your bicycle.

Assembly Instructions 7

NOTICE: Ensure all hardware is tightened properly and all safety checks in the following sections are performed before first use.

Step 5 : Install the pedals. The left and right pedals are marked on both ends. First, install the right pedal by tightening the pedal in a clockwise

direction. The left pedal is tightened by turning the pedal in a counterclockwise direction. Both pedals should be tightened to 35

Newton meters by using a torque wrench.

Step 6 : Adjust the saddle height. Loosen the seat clamp, remove the seat post and ensure the seat clamp is centered over the hole in the seat

tube. Insert the seat post into the slot, adjust the saddle height to a suitable height and tighten the adjustment nut.

Step 7 : Adjust the seat position forwards or backwards. Use an allen wrench to loosen the seat adjustment bolt and make sure to stay within

the marked adjustment range.

Step 8 : Install the optional rear rack. Align the holes in the rear rack with the holes in the frame and tighten them with screws.

Step 9 : Install the taillight. Attach the taillight and the rear rack by the screw.

Step 10 : Check if the battery pack is locked into the frame of the WALKER Breeze Step-Thru. When you want to take off the battery, insert

the key and turn it to release the battery pack. The battery pack can be removed and charged separately.

Table des matières

Manuels Vélo populaires d'autres marques

RAMBO

RAMBO R1000X2M-FF-BFD Manuel utilisateur

Vermeiren

Vermeiren SAFARI Manuel utilisateur

Velec

Velec A2/36V Manuel utilisateur

Coswheel

Coswheel A-ONE Manuel utilisateur

Betzold

Betzold 97869 Manuel utilisateur

Cervélo

Cervélo S3 2019 Manuel utilisateur

Tenways

Tenways AGO X Manuel utilisateur

Festo

Festo EGSC-BS-KF Manuel de la liste des pièces

Gio Electric

Gio Electric H1 Volt Manuel utilisateur

GOGOBEST

GOGOBEST GM30 Manuel utilisateur

DAHON

DAHON CIAO - 2009 Manuel utilisateur

Aprimatic

Aprimatic ONDA 500 Guide de démarrage rapide

MV Agusta

MV Agusta Lucky Explorer GRAVEL Manuel d'instructions

Greyp

Greyp G6 Series Manuel utilisateur

Babboe

Babboe Carve-E Manuel utilisateur

Huka

Huka orthros Manuel utilisateur

Xtracycle

Xtracycle Stoker 2021 Manuel utilisateur

APRILIA

APRILIA DORSODURO 750 ABS 2015 Manuel utilisateur