BM PRO RVView2 Manuel utilisateur
TEAMBMPRO.COM
OWNER’S MANUAL
RVView2
TEAM
BMPRO
.COM
POWERING YOUR ADVENTURES
With over 50 years’ experience in
power solutions combined with
manufacturing and design facilities in
Melbourne, Australia, BMPRO are the
leading experts in RV power and control
management.
Inspired by the great outdoors, we
have created a range of rugged, smart
and reliable products to power your
adventures.
Our range of battery, power and RV
management and control systems gives
you peace of mind when you are on the
road, so that you can relax in even the
most far flung destinations, knowing
you have control over your power
needs.
To learn more about the BMPRO range
of products, please visit our website
teambmpro.com
4
Correct installation is the most critical factor in ensuring the safe use of the RVView2. If
every consideration of these instructions has been satisfied, the RVView will be safe to
operate.
Keep the RVView2 away from water or other liquids.
Clean the housing of this product lightly with a dry or moist cotton cloth. Do not use alcohol,
thinners, benzene or any other chemical cleaner. Do not allow any liquids to enter the
housing.
The RVView2 is a high precision electronic product. It contains no user-serviceable parts
inside. Do not try to dismantle, modify or repair it yourself. Disassembly, service or repair by
an unauthorised person will void the warranty.
Product specifications are subject to change and improvement without notice.
SAFETY PRECAUTIONS
Please read the Safety Precautions before installing or using the RVView2.
Be sure to observe all precautions without fail. Failure to observe these instructions
properly may result in personal damage, or personal injury which depending on the
circumstances may be serious and cause loss of life.
Designed by BMPRO, one of Australia’s leading power solution experts, the BMPRO
product range is proudly designed and manufactured in Melbourne, Australia, and
represent a high-quality product that will provide years of service.
DISCLAIMER BMPRO accepts no liability for any loss or damage which may occur
from the improper or unsafe use of its products. Warranty is only valid if the unit has
not been modified or misused by the customer.Copyright © 2021
MANUAL PART 035616
REV 4.0
5
6
CONTENTS
SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . 4
ABOUT THE RVVIEW 2. . . . . . . . . . . . . . . . . . 8
DESCRIPTION OF PARTS. . . . . . . . . . . . . . . . . 9
POWER INFORMATION SCREEN . . . . . . . . . . . . . .9
WATER TANKS SCREEN . . . . . . . . . . . . . . . . 11
RVVIEW2 WIRING DIAGRAM . . . . . . . . . . . . . . . 12
USING YOUR RVVIEW2 . . . . . . . . . . . . . . . . . 13
SERVICING . . . . . . . . . . . . . . . . . . . . . . 13
FAQS AND TROUBLESHOOTING . . . . . . . . . . . . . . 14
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . 15
COMPLIANCE . . . . . . . . . . . . . . . . . . . . . 16
WARRANTY TERMS AND CONDITIONS (AUSTRALIA) . . . . . 17
LIMITED WARRANTY TERMS AND CONDITIONS (USA). . . . . 18
7
8
ABOUT THE RVVIEW2
The RVView2 is a wall-mounted 12V battery monitor, designed specifically to operate
with BMPRO’s BatteryPlus35-II series (BatteryPlus35-II-SI, BatteryPlus35-II-SR,
BatteryPlus35-II-HA).
The RVView2 provides vital data at a glance including caravan battery voltage and
charging/discharging current. The RVView2 also provides an indication of the battery’s
remaining charge capacity as well as the time remaining before the battery completely
discharges - so you’ll never be left on the road without battery power.
In addition to battery monitoring, the RVView2 enables monitoring of water levels of up
to four water tanks, all from a sleek, wall mounted back-lit display.
With the OdysseyLink103, the RVView2 becomes part of your Odyssey system.
With the Odyssey system, you can use BMPRO’s free Odyssey App to monitor your
battery and control your caravan’s water pumps from your smartphone!
For more information about Odyssey, refer to your Odyssey Owner’s Manual.
Figure 1: The Odyssey system with RVView2
9
DESCRIPTION OF PARTS
q WARNING INDICATOR
Indicating an issue, the RVView2 will display a warning if:
• There is a fault with one (or more) of the loads connected to the BatteryPlus35-II,
for example, a short or overload fault.
• BMPRO’s BC300 + CommLink has been installed and communication with the
BC300 is lost.
w POWER SOURCE INDICATOR
Displays the power source currently being utilised by the BatteryPlus35-II for charging
the battery and powering the loads.
Figure 2: The power information screen on the RVView2 Monitor
Figure 3: RVView2 power source indicator icons
AC MAINS ONLY SOLAR/AUX
BLENDING
SOLAR
SOURCE ONLY
SOLAR/MAINS
BLENDING
AUXILIARY
SOURCE ONLY
32 4
67
5
1
POWER INFORMATION SCREEN
10
e BATTERY STATUS INDICATOR
Displays the status of the caravan battery connected to the BatteryPlus35-II.
The charging indicator will only appear if the positive current to the battery is 1.0A or
higher.
r SYSTEM VOLTAGE
Displays the system voltage.
If a caravan battery is connected to the BatteryPlus35-II, the RVView2 will display
battery voltage. Otherwise the RVView2 will display the output of the BatteryPlus35-II
when in Power Supply Mode.
t BACKLIGHT/SCREEN CHANGE BUTTON
Press the backlight/screen change button to turn the backlight of the RVView2 screen
on.
To switch the screen between the power information screen and the water tanks
screen, press the backlight/screen change button to turn the backlight on, then press
the button again to change the screen.
The backlight will automatically turn off after 30 seconds.
y OUTPUT CURRENT
The current provided by the BatteryPlus35-II to power loads connected to the unit.
The RVView2 can only show current higher than 0.5A. Anything lower than 0.5A will be
displayed as 0.0A.
u INPUT CURRENT
The total current drawn by the BatteryPlus35-II, from its input sources, to power loads
connected to the BatteryPlus35-II and to charge the caravan battery.
If the BatteryPlus35-II is charging the battery, the input current minus the output
current will indicate the battery charging current.
The RVView2 can only show input current higher than 0.5A. Anything lower than 0.5A
will be displayed as 0.0A.
This display may be blank if there are no input sources available and the battery is
disconnected.
Figure 4: RVView battery status indications
BATTERY IS IDLE
AND 100% CHARGED
BATTERY IS IDLE BUT
IS NOT 100% CHARGED
BP35 IS CHARGING
THE BATTERY
CONNECTED BATTERY
IS DISCHARGING
Table des matières
Autres manuels BM PRO Moniteur
