Blumax Speech 001 Manuel utilisateur

Blumax Speech 001
User Manual
DeEn

- 2 -
- 3 -
Contents
EN
Inhalt
I. Prole and Its Function.............................................................................................. 4
I-1. Prole ..................................................................................................................... 4
I-2. Function.................................................................................................................. 5
II. How to use................................................................................................................ 7
II-1. Charge the Batteries ............................................................................................. 8
II-2. Turn on the Blumax Speech 001........................................................................... 8
II-3. Pair the Blumax Speech 001 with your Bluetooth Mobile Phone .......................... 9
II-4. Establish Bluetooth Link ....................................................................................... 11
II-5. Clip the Blumax Speech 001 onto Your Sun Visor ................................................ 12
II-6. Answer an Incoming Call....................................................................................... 12
II-7. Transfer Calls between This Blumax Speech 001 and Your Bluetooth Phone...... 12
II-8. Make a New Call by using Voice Dialing............................................................... 13
II-9. Answer the call waiting.......................................................................................... 14
II-10. Mute the Microphone........................................................................................... 14

- 2 -
- 3 -
EN
II-11. End a Call............................................................................................................ 15
II-12. Reject a Call ....................................................................................................... 15
II-13. Redial Last Dialed Number ................................................................................ 15
II-14. Adjust the Speaker Volume ................................................................................ 16
II-15. Recharge the Low Batteries ............................................................................... 16
II-16. Turn off the Blumax Speech 001......................................................................... 17
II-17. Auto connection to the Bluetooth Mobile Phone ................................................. 18
II-18. Auto power off ..................................................................................................... 18
III. Maintenance and Safe Use ..................................................................................... 19
IV. Electrical Power Specication (car charger/AC adaptor) ........................................ 19
V. Package Contents .................................................................................................... 20

- 4 -
- 5 -
I. Profile and Its Function
I-1. Profile
Fig.1
1. Volume Down
2. Volume Up
3. DC Socket
4. Microphone
5. LED
6. On/Off
7. Speaker
8. Visor Clip
9. Battery Door
EN

- 4 -
- 5 -
I-2. Function (please refer to Fig.1)
I-2-1. On/Off
If you press “On/Off ”, you can:
- Switch on and Off
- Pair
- Answer a new call
- Reject a call
- Make a new call using voice dialing
I-2-2. Volume Up
- Increase the speaker volume
- To mute/un-mute the microphone
I-2-3. Volume Down
- Redial the last dialed number
- Decrease the speaker volume
- Answer call waiting
I-2-4. LED
There are two LED colors (blue and
red) to indicate the state of this Car-
Kit.
EN

- 6 -
- 7 -
I-2-5. DC Socket
It serves as a recharging power socket for rechargeable batteries or
supplies the power to the Blumax Speech 001 when the car charger is connected
to your car.
I-2-6. Built-in Microphone
It allows you to communicate with good voice quality.
I-2-7. Speaker
I-2-8. Battery Door
Loading and unloading rechargeable batteries by opening the battery door.
I-2-9. Visor Clip
Clip the Blumax Speech 001 under your car’s sun visor.
EN

- 6 -
- 7 -
II. How to use
Fig.2
EN

- 8 -
- 9 -
II-1. Charge the Batteries (please refer to Fig.2)
Thank you for buying the Bluetooth Blumax Speech 001.
Before you use it for the rst time, please charge the batteries for 6 hours.
After this, you can fully charge the batteries in 4 hours.
Warning: Use only rechargeable batteries.
II-2. Turn on the Blumax Speech 001
If the Blumax Speech 001 is powered off, press and hold “On/Off ” for 2 seconds.
A long tone will indicate that the Blumax Speech 001 has turned on. At the same
time, the blue LED will ash for a second. And then, the blue LED will keep on ash-
ing every 3 seconds.
EN

- 8 -
- 9 -
II-3. Pair the Blumax Speech 001 with your Bluetooth
Mobile Phone
II-3-1. Put the Blumax Speech 001 in pairing mode
When the Blumax Speech 001 is powered off, press and hold “On/Off ” for 5 sec. In
the rst 2 seconds, a long tone will indicate that the Blumax Speech 001 has turned
on. At the same time, the blue LED will ash for a second. At the end of the 5 sec-
onds, a double tone will be heard. Then the red and blue LEDs will ash alternately,
which indicates the Blumax Speech 001 has entered into pairing mode.
Note: Make Sure the batteries are fully charged.
II-3-2. Put your Bluetooth Mobile Phone in pairing mode
II-3-2-1. Follow the operation manual of your Bluetooth mobile phone to start the
pairing process. Typically, this has to be done by going to a setup or connect menu
EN

- 10 -
- 11 -
and then selecting the options to show Bluetooth devices. Bluetooth may take sev-
eral seconds to establish a connection.
II-3-2-2. Your phone‘s display will indicate that it has found the new device “BLUMAX
SPEECH 001 ”. When you want to pair it, the phone‘s display would demand a
passkey or PIN, then you can enter a sequence of “0000”.
II-3-3. Pair the Blumax Speech 001 with your Bluetooth Mobile Phone
The blue LED of the Blumax Speech 001 will ash every 2 seconds indicating
successful pairing. The phone may also ask whether you want to change the
Blumax Speech 001‘s name. We recommend you should keep the name “BLUMAX
SPEECH 001” so please do not change it.
Note: If pairing does not occur as expected, turn off the Blumax Speech 001 and
your phone, then wait for 10 seconds. Turn them on again and repeat from Step
3-1 to Step3-3.
EN
Autres manuels pour Speech 001
1
Table des matières
Langues :
Autres manuels Blumax Enregistreur vocal


















