Blumax GPS-4013 Manuel utilisateur
Bluetooth GPS Receiver
GPS-4013
User Manual
En
- 3 - Blumax Bluetooth GPS-4013 Receiver
Contents
Note and Warning������������������������������������������������4
Before you begin �������������������������������������������������6
Main features�������������������������������������������������������7
Appearance ���������������������������������������������������������7
Checking the package content ����������������������������8
Charging your battery������������������������������������������9
Start to use ��������������������������������������������������������10
Function of Smart Power Control ���������������������� 11
Other Functions�������������������������������������������������12
LED Indicators���������������������������������������������������12
AGPS ����������������������������������������������������������������12
Overall Features������������������������������������������������15
Trouble Shooting �����������������������������������������������16
Specications ����������������������������������������������������18
Appendix A� How to change battery ������������������20
Appendix B� Helpful tips ������������������������������������21
Appendix C. Certication�����������������������������������22
Warranty Information �����������������������������������������23
- 4 -
- 5 - Blumax Bluetooth GPS-4013 Receiver
Note and Warning
• Blumax Bluetooth GPS-4013 Receiver uses Lithium bat-
tery. If Blumax Bluetooth GPS-4013 Receiver is used in tem-
perature lower than -10°C or higher than 60°C, its battery
charging capability will decrease� Please leave the Blumax
Bluetooth GPS-4013 Receiver far from heat or high temper-
ature environment. In addition, do not expose your Blumax
Bluetooth GPS-4013 Receiver in temperature higher than
140°F/60°C. If you do not follow these rules, the battery
inside Blumax Bluetooth GPS-4013 Receiver may become
heat, explode or burn itself, and this will lead to very serious
damage� The Lithium battery inside the Blumax Bluetooth
GPS-4013 Receiver should be recycled.
• While in the hospital, turning off the Blumax Bluetooth
GPS-4013 Receiver is recommended. Like other common
equipments do, wireless GPS receiver may also affect these
medical equipments which use radio frequency and make
these equipments malfunction�
• For a long period not using Blumax Bluetooth GPS-4013
Receiver, take out the battery and store it in dry/cool places.
• For safety, keep the Blumax Bluetooth GPS-4013 Receiver
and all accessories out of small children’s reach�
• We assume no responsibility for any damages and loss
resulting from the use of this manual and also by deletion of
data as a result of malfunction, dead battery, or misuse of the
product in any way�
• Use only the supplied and approved accessories. Unau-
thorized accessories, antenna, modications or attachments
could damage the Blumax Bluetooth GPS-4013 Receiver,
and may violate regulations governing radio devices�
• Use a dry, clean soft cloth to clean the unit. Do not use
harsh cleaning solvents, chemicals, or strong detergents.
• Do not attempt to open the Blumax Bluetooth GPS-4013
Receiver yourself. Unauthorized hacking may damage the
unit, and void your warranty.
- 6 -
- 7 - Blumax Bluetooth GPS-4013 Receiver
Before you begin
Thank you for purchasing the Blumax Bluetooth GPS-4013
Receiver, a global positioning system receiver with Blue-
tooth wireless technology. Blumax Bluetooth GPS-4013 Re-
ceiver is well suited to system integrations including PDA,
smart phone, Tablet PC and Notebook PC with Bluetooth
devices� It can satisfy a wide variety of applications such as
PDA and smart phone navigation, automotive vehicle track-
ing, personal positioning and sporting. With the dimension
of 72.2(L) x 46.5(W) x 20(H) mm and weight only 64.7g (w/
battery), Blumax Bluetooth GPS-4013 Receiver is an ideal
solution to carry along everywhere�
Blumax Bluetooth GPS-4013 Receiver’s rechargeable bat-
tery can save satellite information such as the status of the
satellite signal, most recent location and the data and time of
its last use. The low-power design has extended the opera-
tion time up to 32 hours and brought you the most conven-
ient and longest usage of its kind. With the lead-free produc-
tion process, Blumax Bluetooth GPS-4013 Receiver is the
most environmentally friendly wireless GPS receiver in the
market�
Blumax Bluetooth GPS-4013 Receiver has distinguished
features others don’t have� With our patent pending Smart
Power Save Mechanism and Fuzzy Auto On/Off features,
our Blumax Bluetooth GPS-4013 Receiver consumes 65%
less power than other wireless GPS receivers, and can ex-
tend the operating time up to 32 hours�
• Semi indoor xed
• AGPS available
• 66 channels Bluetooth GPS
• Smart Power Save Mechanism
• Fuzzy Auto On/Off
• Support G-Mouse
Main features:
Appearance:
1. Power jack (mini USB type)
2. Power switch (on/off)
3. Battery status LED (red/green)
4� Bluetooth status LED (blue)
5� GPS status LED (orange)
6� Internal antenna
1
2
3
45
6
- 8 -
- 9 - Blumax Bluetooth GPS-4013 Receiver
Charging your battery
For the 1st time you use the Blumax Bluetooth GPS-4013
Receiver, please charge battery until it is full. Take the pow-
er cable and connect it to the power jack (mini USB type)
and charge through car cigarette adaptor� This will begin to
charge the battery� Charging time is 3 hours typically�
The LED that represents the battery is the right-most battery
icon (shown in below)�
• If the LED is red, that means battery power is critically low.
Please charge�
• If the LED is green, that means battery is charging now.
• When the Power LED is off, the battery is fully charged.
When you plug into the mini USB cable to charge your unit,
it will take 5~10 seconds then you can see the green LED
turning on�
LED,
represents
the battery
status
Checking the package content
Thank you for purchasing Blumax Bluetooth Wireless GPS-
4013 Receiver with 66-Channels. It supports ultra high sen-
sitivity GPS navigation and supports Smart Power control
for power saving� Before you start using Blumax Bluetooth
GPS-4013 Receiver, please make sure if your package in-
cludes the following items� If any item is damaged or miss-
ing, please contact your dealer at once.
1. 1x Blumax GPS Receiver
2. 1x Li-ion rechargeable Battery
3� 1x Car charger
4. 1x CD-ROM (Manual+Software)
5. 1x USB to mini-USB cable
*Unit package contents may vary depending on countries
without prior notice�
- 10 -
- 11 - Blumax Bluetooth GPS-4013 Receiver
Start to use
1. Fully charge the battery when using at the rst time
A fully charged battery can last up to 32 hours continuously
operation�
2. Activate the Bluetooth function in your PDA/Smart
phone or PC
Before activating the Bluetooth function in your PDA/PC,
please switch on Blumax
Bluetooth GPS-4013 Re-
ceiver for paring and check
if your device is equipped
with Bluetooth function� If
not, you may need to ac-
quire an optional CF/SD
Bluetooth card or Bluetooth dongle�
NOTE: The pairing procedure is required to execute in the
rst time only. And the pass code is “0000” if required.
3. Automatically create a shortcut in Bluetooth Manager
window
After the pairing complete, the system will then nd a quick
connect device “BT A+ GPS” in Bluetooth Manager. In fur-
ther use, you just need to click it to connect to this Bluetooth
GPS Receiver.
4. Check the Serial Port in Bluetooth Setting
After complete pairing with the Receiver, please click “Serial
Port” to conrm the assigned COM port. If you use PDA/
PC to pair the GPS Receiver, please check “Outbound COM
port”.
5. Set correct Serial Port in your map software
Activate your navigation software and make sure to select
the correct “Serial Port”.
NOTE: In the map software such as TomTom, you might
need to change preference and set “Other Bluetooth GPS”
according to PDA/phone model. In some case please con-
sult map software company to vary the setting if you have
issue on positioning�
6. Switch off the Bluetooth function
Switch off GPS function in your PDA/Smart phone/PC, then
the Bluetooth connection will be disconnected automatical-
ly. Then put Blumax Bluetooth GPS-4013 Receiver power
switch to “OFF” position.
on off
Function of Smart Power Control (Power saving mode)
Blumax Bluetooth GPS-4013 Receiver supports Smart Pow-
er control (Power saving mode)� It can automatically enter
sleeping mode after the Bluetooth connectivity is turned off,
so the Blue LED will turn to ash every 5 seconds. Thus you
can always power it on with very low power consumption�
Under power saving mode, when detecting Bluetooth is be-
ing connected, Blumax Bluetooth GPS-4013 Receiver will
wake up itself and the blue LED will turn to ash every
2 second and GPS Orange LED will be also on�
Function of Smart Power Control
- 12 -
- 13 - Blumax Bluetooth GPS-4013 Receiver
Other Functions
LED Indicators
Category Symbol Color Status Function
Bluetooth
Status
LED
Blue
Always on:
Bluetooth on, but not
connected to any Blue-
tooth devices yet
Slowly
blinking:
Sleeping mode (1 time
/ 5 seconds)
Quickly
blinking:
Bluetooth is connected
and ready for data
transmission (1 time /
2 seconds)
Battery
Status
LED
Red Blinking: The battery is too low
Green Light On: The battery is charging
Green Light Off: The battery is fully
charged
GPS
Status
LED
Orange
Always on: Acquiring satellites,
GPS position not x
Quickly
Blinking:
GPS position is xed,
Navigation
AGPS
Before you use GpsView software, you need to install Blumax
Bluetooth GPS-4013 Receiver driver. (Install InstallDriver.
exe driver for USB port from CD-ROM)
1. Start → Control → Panel → System → Hardware
→ Device Management → Connector (COM and LPT)
Check Com port position
2. Open GpsView.exe→Check Baud Rate and
Com port→click On
- 14 -
- 15 - Blumax Bluetooth GPS-4013 Receiver
3. Choice Setup
4. Choice Update
5. Enter complete
NOTE: When you use AGPS function, we suggest use Gps-
View to download the AGPS data via USB cable
Overall Features
Low power consumption, built-in chargeable + Lithium bat-
tery (up to 32 hrs operation time after fully charged)
Size: 46.5W x72.2L x20H mm / Weight: 64.7g (battery in-
cluded)
- 16 -
- 17 - Blumax Bluetooth GPS-4013 Receiver
Trouble Shooting
Problems Reasons Methods
No posi-
tion output
but timer is
counting
Weak or no GPS
signal can be
received at the
place of Blumax
Bluetooth GPS-
4013 Receiver
Find an open
space for your
Blumax Blue-
tooth GPS-4013
Receiver
Execute fail Bluetooth function
unstable
Re-Start PDA or
PC or re-install
software
Can not turn
on the
COM port
Install Blumax
Bluetooth GPS-
4013 Receiver
incompletely or
the COM port of
the device is being
used
Install Blumax
Bluetooth GPS-
4013 Receiver
completely or stop
other device that is
being used�
Can not nd
out Blumax
Bluetooth
GPS-4013
Receiver
Poor connection
Re-Start PDA or
PC and re-install
software�
Problems Reasons Methods
No Signal
No action for few
minutes may cause
the Pocket PC
enter power saving
mode� It may close
the COM port at
the same time�
Close the applica-
tion and execute
it again to re-open
the COM port�
No Signal
Weak or no GPS
signal when using
Blumax Bluetooth
GPS-4013 Re-
ceiver indoor
Go outdoors to
improve the poor
GPS signal�
- 18 -
- 19 - Blumax Bluetooth GPS-4013 Receiver
General
Chipset MTK MT3329
Frequency L1,1575.42 MHz
C/A Code 1�023 MHz
Channels 66
DGPS WAAS, EGNOS, MSAS
Datum WGS 84
CPU ARM7TDMI
Performance Characteristics
Position Accuracy Without aid: 3.0 m 2D-RMS
< 3 m CEP (50 %) without SA (horizontal)
DGPS (WAAS, EGNOS, MSAS): 2.5 m
Velocity Accuracy Without aid: 0.1 m/s
DGPS (WAAS, EGNOS, MSAS): 0.05 m/s
Acceleration Without aid: < 4 g
DGPS (WAAS, EGNOS, MSAS): < 4 g
Timing Accuracy 50 ns RMS
Reacquisition Time < 1 s
Hot start 1�5 s
Warm start 34 s
Cold start 35 s
AGPS < 15 s
Sensitivity Acquisition: -148 dBm Max.
Tracking: -165 dBm Max.
Update 1 Hz ~ 5 Hz
Specifications Dynamic
Altitude Maximum 18,000 m
Velocity Maximum 515 m/s
Acceleration Maximum 4 g
Power
Input Voltage Vin: DC 5.0 V ± 10 %
Battery Rechargeable Lithium battery
Protocols
GPS Output Data Baud rate 115200 bps, Data bit: 8, Stop bit:
1 (Default)
NMEA NMEA 0183 v3.01 Default: GGA, GSA,
GSV, RMC
Environment
Operating Temperature -10 ~ 60°C
Storage Temperature -20 ~ 60°C
Charging 0 ~ 45°C
Bluetooth
Standard Fully compliant with Bluetooth V1�2
Output Power 0 dBm (Typical), ClassII
Range Over 10 meters
Bluetooth Prole Serial Port Prole (SPP)
Frequency 2�4 G ~ 2�4835 GHz ISM Band
Security Yes
Physical Characteristics
Dimension 46�5 x 72�2 x 20 mm
Weight 64�7 g
Table des matières
Langues :
Autres manuels Blumax GPS
