BluGo TRIPLE C Instructions de montage
BluGo MANUAL GUIDE
INSTRUCTION
Charging your BluGo speaker:
Your BluGo speaker uses a rechargeable battery. Fully
charge battery before using. Please turn
OFF before charging.
1. Use the USB cable provided to connect to any
computer or power adapter. When charging, the red
indicator light will appear.
2. When fully charged, the red indicator light will turn off.
Charging time: Approximately 2hrs.
Turn BluGo off when not in use to save battery life.
(Your BluGo will beep every 30 seconds while playing
music when the battery is low. Please
recharge it for continuous use.
Pairing device with your BluGo:
Before using the BluGo, please pair it with your
smartphone, MP3 player, computer or any
Bluetooth-enabled device.
• Set your Bluetooth device to discover the BluGo by
following the instruction manual for your device.
Typically the steps are going to “Setup”, “connect” or
“Bluetooth” menu and then selection to discover
Bluetooth devices.
• Turn the BluGo ON. Speaker will automatically begin
pairing. The blue indicator light will flash quickly, this
indicating “in pairing mode”.
• When your Bluetooth-enabled device discovers the
BluGo, press “OK” to pair with the BluGo. Blue indicator
light will switch to slow blinking to indicate pairing is
successful.
Troubleshooting:
• If Bluetooth-enabled device fails to locate the BluGo,
check that the speaker is ON.
• Ensure that your device is within range (within 30
feet/10 meters).
• Restart your BluGo to reactivate Bluetooth pairing
mode.
• Ensure that your speaker is not connected or paired to
any other Bluetooth device as the BluGo can only be
paired to one device at a time.
Playing music:
After pairing is established, you can play music from your
Bluetooth-enabled device. Music and volume can be
controlled by your device. Your BluGo will play up to 3
hours depending on volume level.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
INSTRUCTION
Charging your BluGo speaker:
Your BluGo speaker uses a rechargeable battery. Fully
charge battery before using. Please turn
OFF before charging.
1. Use the USB cable provided to connect to any
computer or power adapter. When charging, the red
indicator light will appear.
2. When fully charged, the red indicator light will turn off.
Charging time: Approximately 2hrs.
Turn BluGo off when not in use to save battery life.
(Your BluGo will beep every 30 seconds while playing
music when the battery is low. Please
recharge it for continuous use.
Pairing device with your BluGo:
Before using the BluGo, please pair it with your
smartphone, MP3 player, computer or any
Bluetooth-enabled device.
• Set your Bluetooth device to discover the BluGo by
following the instruction manual for your device.
Typically the steps are going to “Setup”, “connect” or
“Bluetooth” menu and then selection to discover
Bluetooth devices.
• Turn the BluGo ON. Speaker will automatically begin
pairing. The blue indicator light will flash quickly, this
indicating “in pairing mode”.
• When your Bluetooth-enabled device discovers the
BluGo, press “OK” to pair with the BluGo. Blue indicator
light will switch to slow blinking to indicate pairing is
successful.
Troubleshooting:
• If Bluetooth-enabled device fails to locate the BluGo,
check that the speaker is ON.
• Ensure that your device is within range (within 30
feet/10 meters).
• Restart your BluGo to reactivate Bluetooth pairing
mode.
• Ensure that your speaker is not connected or paired to
any other Bluetooth device as the BluGo can only be
paired to one device at a time.
Playing music:
After pairing is established, you can play music from your
Bluetooth-enabled device. Music and volume can be
controlled by your device. Your BluGo will play up to 3
hours depending on volume level.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
INSTRUCTION
Charging your BluGo speaker:
Your BluGo speaker uses a rechargeable battery. Fully
charge battery before using. Please turn
OFF before charging.
1. Use the USB cable provided to connect to any
computer or power adapter. When charging, the red
indicator light will appear.
2. When fully charged, the red indicator light will turn off.
Charging time: Approximately 2hrs.
Turn BluGo off when not in use to save battery life.
(Your BluGo will beep every 30 seconds while playing
music when the battery is low. Please
recharge it for continuous use.
Pairing device with your BluGo:
Before using the BluGo, please pair it with your
smartphone, MP3 player, computer or any
Bluetooth-enabled device.
• Set your Bluetooth device to discover the BluGo by
following the instruction manual for your device.
Typically the steps are going to “Setup”, “connect” or
“Bluetooth” menu and then selection to discover
Bluetooth devices.
• Turn the BluGo ON. Speaker will automatically begin
pairing. The blue indicator light will flash quickly, this
indicating “in pairing mode”.
• When your Bluetooth-enabled device discovers the
BluGo, press “OK” to pair with the BluGo. Blue indicator
light will switch to slow blinking to indicate pairing is
successful.
Troubleshooting:
• If Bluetooth-enabled device fails to locate the BluGo,
check that the speaker is ON.
• Ensure that your device is within range (within 30
feet/10 meters).
• Restart your BluGo to reactivate Bluetooth pairing
mode.
• Ensure that your speaker is not connected or paired to
any other Bluetooth device as the BluGo can only be
paired to one device at a time.
Playing music:
After pairing is established, you can play music from your
Bluetooth-enabled device. Music and volume can be
controlled by your device. Your BluGo will play up to 3
hours depending on volume level.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Table des matières
Manuels Intervenants populaires d'autres marques
Bowers & Wilkins
Bowers & Wilkins 4 Manuel utilisateur
Sonance
Sonance SONOS OUTDOOR Series Manuel utilisateur
Electro-Voice
Electro-Voice EVID FM4.2 Manuel utilisateur
Pioneer
Pioneer XW-HTD630 Manuel utilisateur
Onn
Onn BWA16AA002 Manuel utilisateur
HP
HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur