BlueTrek Sugar-Clip Manuel utilisateur

EC - Declaration of Conformity

We, ModeLabs Technologies Ltd of

31/F China Online Centre,

333 Lockhart Road,

Wan Chai, Hong Kong

declare under our sole responsibility that our product

BLUETREK sugar-clip

to which this declaration refers is in conformity with the appropriate standards

EN300 328-02

EN301 489-17

EN301 489-01

EN50371

EN60950

Following the provisions of Radio and Telecommunications Terminal Equipment directive

1999/5/EC.

November 2007

Guillaume Ponticelli, Director of Development

FCC/ Industry Canada Notice

This device complies with Part 15 of the FCC rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference. (2) This device must accept

any interference received, including interference that may cause undesired operation.

In compliance with Industry Canada regulations, technical specifications have been

provided in a declaration of conformity.This does not imply that Industry Canada approved

the equipment.

Caution: Changes or modifications to this Bluetooth® headset not expressly approved by

the party responsible for compliance could void the user’s authority to operate it.

Bluetooth® is a trademark owned by Bluetooth SIG, Inc. and is used by the manufacturer

under license.

Before using your headset for the first time

-You must charge it continuously for about 4 hours, until the red indicator light turns off.

Please refer to the “Charging the BLUETREK® sugar-clip” section of this manual.

-Pair the headset with a mobile phone. Please refer to the “Pairing the BLUETREK® sugar-clip”

section of this manual.

Introduction

The BLUETREK® sugar-clip headset is a wireless headset based on the Bluetooth® technology.

It complies with Bluetooth® 1.2 protocol, supporting Headset and Hands-free profile.

A built-in voice alert is an advanced feature that is now available on your headset. A

recorded voice reminds you of the actions in your headset. For details, please refer to

“Voice alert” section of this manual.

The BLUETREK® sugar-clip headset has 2 buttons:

·“TALK”button (main button)

· 1“VOL+/-“ button

1 I BLUETREK sugar-clip

English

Indicator light

TALK button

VOL+/- button

Microphone

Charging socket

Charging the BLUETREK® sugar-clip

Please connect the charger to the headset and to the main. During the charge, the

indicator light is red. The indicator light will turn off when the charge is complete.

During subsequent charges, the charging should take approximately 3 hours.

When you hear a low-tone beep (or the voice alert if activated) in your headset at regular

intervals, and the indicator light flashes in red, your headset needs to be recharged.

Important:

· If your headset is fully charged, the red indicator light will not turn on when plugging

into the charger.

(To check whether your headset is fully charged, press the talk button for approx.

2 seconds, once released, the red indicator light will turn on for approx. 3 seconds.)

· To maximize battery lifetime, it is recommended to recharge your headset to full capacity

only when the battery is low, since a battery has a lifetime of about 500 charging cycles.

· If you leave your headset battery empty for an extended period of time, it could

excessively discharge the battery. In this case, charge your headset for 3 hours or more

until the battery recovers and recharges completely.When you first charge the headset

after prolonged storage, it may take few minutes for the red indicator light to turn on.

· Do not charge your headset for more than 10 hours.

· The use of any other charger will automatically suspend the warranty. It is strictly

forbidden and can be very dangerous.

BLUETREK sugar-clip I 2

English

Pairing the BLUETREK® sugar-clip

Before using the BLUETREK® sugar-clip headset, you must pair it with your Bluetooth® mobile

phone. Pairing is the process of linking 2 Bluetooth® devices, so that they can communicate.

To initiate pairing:

Place the BLUETREK® sugar-clip and your mobile phone within 0.3 meter (1 foot) from

each other.

3 I BLUETREK sugar-clip

English

Switch on your phone and select its

Bluetooth® discover mode (refer to the

Bluetooth® mobile phone user manual).

When the BLUETREK® sugar-clip is switched

off, press and hold the TALK button for

about 7 seconds until the indicator light

flashes red and blue alternately. And a

sound can be heard in the speaker.

BLUETREK sugar-clip

“0000”

BLUETREK sugar-clip

Connect

Assign short name

Set as unauthorised

Delete

Select Cancel

If pairing was successful, the indicator light will switch to blue and flashes slowly.

If you haven’t started the discovery mode within 5 minutes, the headset will go to the

standby mode. You must then switch off your headset and start the pairing again.

English

Once the mobile phone detects the headset, a “BLUETREK sugar-clip”message

will be displayed. Follow the phone instructions to accept the pairing.The PIN

code (or passkey) is 0000, then press “yes” or“ok”.

For some phones, you

may need to select

“Connect”

BLUETREK sugar-clip I 4

5 I BLUETREK sugar-clip

English

Wearing the BLUETREK® sugar-clip

Clip-on design with magnetic holder for attaching to your clothes and for ease of use.

Clip-on design Magnetic holder

Switching the BLUETREK® sugar-clip ON and OFF

Switching BLUETREK® sugar-clip ON

When your headset is off, press and hold the TALK button for about 5 seconds until the

blue indicator light is on. A beep (2 tones) can be heard in the speaker. Release the

TALK button.

Switching BLUETREK® sugar-clip OFF

When your headset is on, press and hold the TALK button for about 7 seconds until the red

indicator light is on. A beep (2 tones) can be heard in the speaker then release the TALK

button.

Making a call

Mobile phone with voice recognition

. Make sure the voice recognition function on your mobile is activated and your voice tags

have been recorded with the phone.To enter these, please refer to your phone’s manual.

.When there is no incoming or active call, press once on the TALK button

.Wait for the audio signal sent by the mobile phone (generally a short tone).

. Speak the name of person you wish to call.

English

BLUETREK sugar-clip I 6

Mobile without voice recognition

. Make sure both the headset and the mobile phone are ON and in stand-by mode.

. Dial the number on the phone keypad, after approximately 2 seconds the audio

connection will be established.

This function may not be available on some phones, please refer to the trouble shooting

frequent asked questions in our website: www.bluetrek.com. to find out more.

Answering a call

When the headset rings, press once on the TALK button to take the call.

Ending a call

Press once on the TALK button to end an active call.

Adjusting the volume

To increase the volume during an active call, press the“VOL+”button on the headset.

To decrease the volume during an active call, press the“VOL-“ button on the headset.

7 I BLUETREK sugar-clip

English

Muting the microphone

To mute the microphone during an active call

During an active call, press and hold the VOL+ button for approximately 2 seconds. A

periodic tone can be heard in the speaker when the microphone is muted.

To end the mute function

When the microphone is muted, press and hold the VOL+ button for approximately 2-3

seconds. The periodic tone will end.

During an active call, double click on the TALK button.

This function only works in the Hands-Free Profile.

In the Headset profile, you can simply turn off your headset.

English

BLUETREK sugar-clip I 8

Transferring a call from BLUETREK® sugar-clip to the mobile

phone

Transferring a call from the mobile phone to the BLUETREK®

sugar-clip

During an active call on the mobile phone, press once on the TALK button to transfer the

call.

This function may not be available depending on your phone.

Table des matières

Autres manuels BlueTrek casque

BlueTrek

BlueTrek Bizz Manuel utilisateur

BlueTrek

BlueTrek MUSICALL Manuel utilisateur

BlueTrek

BlueTrek Tattoo Manuel utilisateur

BlueTrek

BlueTrek Metal Manuel utilisateur

BlueTrek

BlueTrek X2 Manuel utilisateur

BlueTrek

BlueTrek Skin Manuel utilisateur

BlueTrek

BlueTrek M2 Manuel utilisateur

BlueTrek

BlueTrek ORANGE Y2-2 Manuel utilisateur

BlueTrek

BlueTrek X3 Manuel utilisateur

BlueTrek

BlueTrek X3 PRO Manuel utilisateur

BlueTrek

BlueTrek X3 Manuel utilisateur

BlueTrek

BlueTrek Mini-Clip Manuel utilisateur

BlueTrek

BlueTrek CRESCENDO - Manuel utilisateur

BlueTrek

BlueTrek S2 Manuel utilisateur

BlueTrek

BlueTrek E2 Manuel utilisateur

BlueTrek

BlueTrek S21 Manuel utilisateur

BlueTrek

BlueTrek Tattoo Manuel utilisateur

BlueTrek

BlueTrek BT01 Manuel utilisateur

BlueTrek

BlueTrek Bizz Manuel utilisateur

BlueTrek

BlueTrek Carbon Smart Manuel utilisateur

BlueTrek

BlueTrek CRESCENDO - Manuel utilisateur

BlueTrek

BlueTrek Mini Manuel utilisateur

BlueTrek

BlueTrek UFO Manuel utilisateur

BlueTrek

BlueTrek X3 Manuel utilisateur

Manuels casque populaires d'autres marques

Sena

Sena SMH10 Manuel utilisateur

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manuel utilisateur

Sennheiser

Sennheiser EPOS ADAPT 230 Manuel utilisateur

Doro

Doro Flexus HS2005 Manuel utilisateur

GE 98971 Manuel utilisateur

Hama

Hama 00184070 Manuel utilisateur

Plantronics

Plantronics Blackwire 3200 Series Manuel utilisateur

Blue Tiger

Blue Tiger Advantage PLUS Manuel utilisateur

Jawbone

Jawbone Icon Manuel utilisateur

Jabra

Jabra FR 20 Manuel utilisateur

Roxcore

Roxcore Flow A+ Manuel utilisateur

Turtle Beach

Turtle Beach XP 510 Manuel utilisateur

Philips

Philips SHB6101 Manuel utilisateur

Jabra

Jabra PRO 9460 Duo Manuel utilisateur

HyperX

HyperX HyperX Cloud Flight Manuel utilisateur

Bose

Bose MIE2 Mobile Manuel utilisateur

Jabra

Jabra Steel Manuel utilisateur

HyperX

HyperX cloud ii Manuel utilisateur