01
Thank you for purchasing a BlueSpot product, you can find further information
on our range at www.BlueSpot.uk.com. Please ensure that you are using the
product correctly and that all guidance and cautions are followed in accordance
with the instructions. Please retain these instructions for future reference.
General Information
Safe use
Please make sure that you read these instructions carefully in order to avoid injury when
using the air gun. Follow all health and safety rules and regulations. If in doubt and available
please contact a more knowledgeable source.
DO NOT use if damaged.
• Maintain tool in good and clean condition for best and safest performance.
• Keep the work area clean, uncluttered and ensure there is adequate lighting.
• Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip
shoes.
• Keep children and unauthorised persons away from the work area.
• If the air gun is damaged do not use. If damage is found the air gun should be repaired
before use.
• ALWAYS check you are able to handle the weight and power of the tool before use. If
you cannot handle the tool comfortably do not use the tool.
• ALWAYS dress appropriately – clothing should be close fitted and long hair tied back.
Jewellery should be removed and shoes should be worn with a non-slip sole.
• ALWAYS wear the correct eye or face protection when operating the air gun.
• ALWAYS wear approved respiratory protection.
• ALWAYS wear ear defenders to protect yourself from the loud noise caused from when
the impact gun is in use.
• ALWAYS wear anti vibration gloves to protect yourself from the vibration caused by the
tool.
• ALWAYS wear a safety helmet if you are using the tool overhead.
• ALWAYS ensure you work in a well ventilated room.
• ALWAYS ensure the hose does not cause a trip hazard when in use.
• ALWAYS ensure the correct safety precautions are taken when using compressed air.
• ALWAYS check and ensure all air connections are properly attached and sealed before use.
• ALWAYS make sure the maintenance of the tool is carried out to prolong use and
performance.
• ALWAYS make sure that the air pressure has been released before disconnecting.
• ALWAYS make sure the machine has fully stopped before disconnecting.
• ALWAYS ensure the tool has cooled down fully before storing as it can be very hot
after use.
• ALWAYS disconnect the air gun fully from the air line before performing any
maintenance or storing.
• ALWAYS make sure the machine is switched off when connecting it to the air supply.
• NEVER operate the tool if you are under the influence of drugs or alcohol as this is
dangerous.
• NEVER carry the tool by the air line.
• NEVER use power tools in potentially explosive atmospheres unless they have been
designed for that purpose. The air gun has not been designed for that atmosphere.
• NEVER make modifications to the tool.
• NEVER direct air at yourself or anyone else.
• DO NOT exceed the maximum air pressure stated on the tool.
• DO NOT operate the air gun if you are tired as this could be dangerous.
• ALWAYS stop using the tool straight away if you start to experience discomfort or pain.
Consult with a qualified health professional if needed.
