01
Thank you for purchasing a BlueSpot product, you can find further information
on our range at www.BlueSpot.uk.com. Please ensure that you are using the
product correctly and that all guidance and cautions are followed in accordance
with the instructions. Please retain these instructions for future reference.
General Information
Please make sure that you read these instructions carefully in order to avoid injury when
using the flap wheels. Follow all health and safety rules and regulations. If in doubt and
available please contact a more knowledgeable source.
DO NOT use if damaged.
• ALWAYS ensure the flap wheels have been checked for any damage before use. Any
damage found needs to be repaired or replaced before use to prevent damage to
property or personal injury.
• ALWAYS ensure that operators are trained in the use of flap wheels and understand and
follow the safety requirements before operation.
• ALWAYS make sure the wheels have been mounted correctly and securely. Always
ensure the instructions have been followed carefully before use.
• ALWAYS handle flap wheels with care to avoid accidental damage.
• ALWAYS check maximum operating speed of the flap wheel and drill.
• ALWAYS wear approved ear and eye protection when using flap wheels.
• ALWAYS wear approved hand protection when using flap wheels.
• ALWAYS wear approved dust respirators when using flap wheels.
• Maintain tool in good and clean condition for best and safest performance.
• Keep the work area clean, uncluttered and ensure there is adequate lighting.
• Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip
shoes.
• Keep children and unauthorised persons away from the work area.
• BE AWARE of where your body is positioned when using the flap wheel. The body
should not be positioned in line with the flap disc.
• DO NOT exceed the maximum operating speed of the flap wheel.
• DO NOT exceed the maximum operating speed of the drill.
• DO NOT force the flap wheels onto a machine which does not match the bore size.
Safe use
• DO NOT alter the size of the flap wheel bore.
• NEVER use the flap wheels to perform a task that they were not designed for.This can
cause damage to property or cause personal injury.
• NEVER use the flap wheels near flammable materials or gases.
• If any of the flap wheels are damaged do not use.
