Blueclean AR 144 S Guide de configuration rapide

Questions, problems, missing parts?

Before returning to your retailer, call our

customer service department at 1-866-235-5112,

8 a.m. - 5:00 p.m., CST, Monday - Friday.

www.arblueclean.com

1650 PSI

ElectricPressure Washer

QUICK ASSEMBLY AND

USE INSTRUCTIONS

Model AR 144 S

READ CAREFULLY

IMPORTANT: RETAIN THESE INSTRUCTIONS

AND ATTACH RECEIPT TO MANUAL FOR FUTURE

REFERENCE

AR144_Quick-Start.pdf

PACKAGE CONTENTSPACKAGE CONTENTSPACKAGE CONTENTS

HARDWARE CONTENTS

PART DESCRIPTION QUANTITY

I Variable Spray Nozzle Lance 1

J Extension Lance 1

K Nozzle Cleaning Wire 1

L Turbo Lance 1

M Fixed Brush 1

N O-Ring Kit 1

AA Screws 2

PART DESCRIPTION QUANTITY

A Spray Gun Holster 1

B Handle 1

C Power Washer Unit 1

D Cord Hook 1

E High Pressure Hose 1

F Spray Gun 1

G Spray Gun Lock/Unlock 1

H Foam Cannon 1

Screw

Qty. 2

OFF/O

ON/I

1650MAX

PSI

750ml

600ml

450ml

300ml

150ml

O-Rings

Note: Screws are located in

package with manual

PREPARATION

Before beginning assembly of product, make sure all

parts are present. Compare parts with package contents

list and hardware contents list. If any part is missing or

damaged, DO NOT attempt to assemble the product.

Estimated Assembly Time: 5 minutes

Tools Required for Assembly (not included): Phillips

screwdriver

ASSEMBLY INSTRUCTIONS

PREPARATION

OFF/O

ON/I

1650MAX

PSI

Power Unit Assembly

Install handle (B) to power washer unit (C). Secure

with screws (AA).

Note: DO NOT use a power screwdriver. When the

twist of the screwdriver. DO NOT overtighten.

Screw x 2

Screw

Qty. 2

Slide spray gun holder (A) onto left side, when facing the

unit, of power washer unit (C) as shown.

Note: This step does not require any screws.

Hardware Used:

OFF/O

ON/I

1650MAX

PSI

Slide cord hook holster (D) onto right side, when facing

the unit, of power washer unit (C) as shown.

Note: This step does not require any screws.

High Pressure Hose Assembly

Screw high pressure hose (E) clockwise onto bottom

front of power washer unit (C). Pull back collar and insert

o-ring post into water outlet far enough so collar can

thread onto outlet threads until hand tight. If it takes

fewer than six turns you have not properly tightened

the high pressure hose fitting.

Note: DO NOT use pliers or locking pliers to tighten.

ASSEMBLY INSTRUCTIONS

Connect the other end of high pressure hose (E) to

spray gun (F) by inserting the silver metal tip of high

pressure hose into the fitting just ahead of trigger

guard. It will lock into spray gun with a “click”.

Confirm hose is locked into spray gun by slightly

pulling on hose. The hose is now securely attached

to spray gun. Note: DO NOT press button on underside

of gun when connecting hose to gun.

To release hose (E) from spray gun (F), press button on

underside of gun toward trigger guard. The hose will

slide out from connection.

Locking Spray Gun (before Lance installation)

To lock trigger of spray gun (F), point gun away from you

and press bottom half of lock button to engage lock.

Squeeze or pull trigger to make sure it is locked.

ALWAYS leave lock button in locked position when not

in use. This ensures the gun is in “safe” mode until it is

ready for use. To unlock, press top half of lock button to

release. Note: The trigger lock prevents trigger from being

accidentally engaged.

Lock

Unlock

Extension Lance installation

With spray gun (F) in locked position, attach extension

lance (J) directly to spray gun. Insert lance extension

into gun, pushing together and turning clockwise

simultaneously. Turn the extension collar clockwise

to lock into place. To remove extension lance (J), turn

extension collar counterclockwise to unlock, then push

together and turn counterclockwise to release.

Note: The extension lance must be inserted in gun

before using any of the other attachments, and

in place for storage. It is recommended that once

extension is connected to leave it in place.

PREPARATIONASSEMBLY INSTRUCTIONS

750ml

600ml

450ml

300ml

150ml

Variable Spray Nozzle Lance, Roto Spray Lance, or

Fixed Brush installation

Insert Foam Cannon (H), Variable Spray Nozzle (I), Roto

Spray Lance (L), or Fixed Brush (M) into the end of

the extension lance by inserting and pushing together

turning clockwise simultaneously. To remove push

together and turn counterclockwise.

Note: Push the safety lock button to lock the trigger

when changing lances to ensure that they do not

accidentally eject with force during removal.

Garden Hose Adapter Installation

Attach garden hose to the black collar of garden hose

adapter.

Note: Flush out garden hose before connecting

to garden hose adapter.

You have now completed assembly and are ready to

begin using your electric power washer. Read and

observe all safety instructions.

750ml

600ml

450ml

300ml

150ml

Detergent Bottle Installation

into screw-on top. If you do not see the straw, look

inside the bottle and attach it to the screw-on top. When

detergent or cleaner with a water ratio according to

instructions on the container.

• Pressure washer detergents are recommended. See

page 13 for more information.

• DO NOT use thick or gel-like detergents as they will

clog the power washer and can cause damage.

Insert detergent bottle (H) into extension lance (J),

push in and turn clockwise

OPERATING INSTRUCTIONSOPERATING INSTRUCTIONS

• Turn on water supply at the faucet to completely

open

• Make sure the “ON/OFF” switch is in the “OFF”

position. The power switch has international symbols

for ‘on’ and ‘off’: On (|) Off (O).

• Unwind the power cord completely and plug the GFCI

into a grounded 120 volt outlet. .

• Release the safety lock button on the spray gun by

pressing the top half of the safety lock button. While

pointing the spray gun in a safe direction, squeeze

the trigger on the spray gun until there is a steady

stream of water, letting the water and air out of the

hose.

• Turn the power switch to the “ON” (|) position. The

unit will turn on for 1 - 2 seconds and shut off. This is

a normal function of the auto start feature.

Unlock

OFF/0

ON/I

OFF/0

ON/I

OPERATING INSTRUCTIONSOPERATING INSTRUCTIONSOPERATING INSTRUCTIONS

• Begin power washing by squeezing the trigger on the

spray gun all the way into the handle.

• Release the spray gun trigger to stop the power washer

• Allow the motor to come to a complete stop before

squeezing the trigger again.

• Squeezing rapidly will cause the auto start feature to

miss an on/off cycle that may prevent it from turning

on while squeezing trigger after rapid squeezing. Use

slow deliberate trigger pulls to avoid such symptoms.

• Always test a small area to avoid chance of damaging

the surface.

• When using the variable spray nozzle, the spray

pattern and intensity can be adjusted for each task by

twisting the spray nozzle at the far end of the lance.

Operation Tips

• If you hear the motor run intermittently when the

trigger is not being squeezed, that is normal. The

pump is priming itself so it is ready to operate when

the trigger is squeezed. Turn off the power washer if

• The o-rings on the bayonet end of the nozzle lance

should be cleaned regularly and lubricated with non-

water soluble grease such as

petroleum jelly.

• Keep the nozzle cleaning wire for use in unclogging

the nozzle. If you lose the cleaning wire, a

straightened paper clip also works.

How to Avoid Damaging Surfaces

• Damage to surfaces being cleaned occurs because

the impact force of the water pressure exceeds

the durability of the surface. Bare wood can be

penetrated; paint can be peeled off, etc. You can vary

the force of your power washer by controlling:

1. The angle of the surface being cleaned

2. The distance of the nozzle from the surface being

cleaned

• NEVER use a narrow high pressure stream of water on

soft surfaces susceptible to damage.

Adjusting Soap Levels on Foam Cannon

Twist knob to adjust the level of soap as indicated on

the top of the Foam Cannon (J). Twist toward the higher

concentration of bubbles for more soap, or the opposite

direction for less.

Table des matières

Autres manuels blueclean Nettoyeur haute pression

blueclean

blueclean ANNOVI REVERBERI Proliner 8.150Z Manuel utilisateur

blueclean

blueclean AR525 Manuel utilisateur

blueclean

blueclean 680K Manuel utilisateur

blueclean

blueclean 6950 Manuel utilisateur

blueclean

blueclean AR391SS Mode d’emploi

blueclean

blueclean 15343 Manuel utilisateur

blueclean

blueclean 4.1 WI-TOUCH Manuel utilisateur

blueclean

blueclean AR145S Manuel utilisateur

blueclean

blueclean 1018-H Manuel utilisateur

blueclean

blueclean 430 Manuel utilisateur

blueclean

blueclean 620 Mode d’emploi

blueclean

blueclean 5640 Manuel utilisateur

blueclean

blueclean Speedy Wash Manuel utilisateur

blueclean

blueclean 1700 PSI Mode d’emploi

blueclean

blueclean Speedy Wash Manuel utilisateur

blueclean

blueclean 1018 Manuel utilisateur

blueclean

blueclean 1435 Manuel utilisateur

blueclean

blueclean BC383HSS Mode d’emploi

blueclean

blueclean 2590 Manuel utilisateur

blueclean

blueclean Take-Along Mode d’emploi

blueclean

blueclean AR390SS Manuel utilisateur

blueclean

blueclean AR130 Mode d’emploi

blueclean

blueclean AR388 Manuel utilisateur

blueclean

blueclean AR 1850 Mode d’emploi

Manuels Nettoyeur haute pression populaires d'autres marques

Shark

Shark RG-232637 Manuel utilisateur

Shakti Technology

Shakti Technology S3 Manuel utilisateur

Kärcher

Kärcher K 4 Pure Manuel utilisateur

Porter-Cable

Porter-Cable D25806-025-2 Manuel utilisateur

REM POWER

REM POWER HDEm 662 Manuel utilisateur

Landa

Landa HS-3000 Manuel utilisateur

Craftsman

Craftsman 580.752270 Manuel utilisateur

HIKOKI

HIKOKI AW 100 Manuel utilisateur

Delco

Delco DC 1302 Manuel utilisateur

Kärcher

Kärcher K 3 Full Control Manuel utilisateur

BIEMMEDUE

BIEMMEDUE 120/10 - 170/13 Manuel utilisateur

ARKSEN

ARKSEN 014-HG-14141-HR Manuel utilisateur

Black & Decker

Black & Decker PW1700SPX Manuel utilisateur

Kärcher

Kärcher 595 - SPARE Mode d’emploi

Kranzle

Kranzle B 10 200 Manuel utilisateur

Stihl

Stihl RE 90 Manuel utilisateur

Husky

Husky HU80911 Manuel utilisateur

PowR-Quip

PowR-Quip PQ-2600 Manuel utilisateur

blueclean AR 144 S Guide de configuration rapide

Manuels Nettoyeur haute pression populaires d'autres marques