Blue Aura Blue 1 Manuel utilisateur
INDEX
Safety instructions 3
Front Panel 4
Rear Panel 6
Remote Control 8
Operating Instructions-Connections 10
Operating Instructions-Menu 11
Operating Instructions-Bluetooth Connection 12
Operating Instructions-Preset /RDS 12
Operating Instructions-DAB 13
Specications / Blue Aura Worldwide Guarantee 14
Troubleshooting 15
blue1_man v.01
English
3
This symbol indicates that there are important operating and maintenance instructions in the literature
accompanying this unit.
This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.
Warning: The AC Input connector is used as a safety disconnect device. It must be easily accessible after
installation.
This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way
that it does not require a safety connection to electrical earth.
Correct disposal of this product:
This marking indicates that this product should not be disposed of with other household wastes throughout
the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable reuse of material resources. To return your used device,
please use the return and collection systems or contact the retailer where the product was purchased. They
can take this product for environmentally safe recycling.
This Hi-Fi system is made of metal and plastic.
Please take care when unpacking the system to avoid
scratching or indenting the material.
Safety Instructions
IMPORTANT – The unit will become
hot when in use. Do not place in an
enclosed area such as a bookcase or in
a cabinet without sufficient ventilation.
Ensure that small objects do not fall through any ventilation grille. If this happens, switch off
immediately, disconnect from the mains supply and contact your dealer for advice.
4
Front Panel
13 05 12
03
04
02
01
10
08
09
07
06
11
5
01. Turn On/Off
By pressing this button, Blue 1 will switch between
standby mode (indicated by the LED indicator in RED)
and on (indicated by the LED indicator in Green)
02. LED Indicator
This LED indicator will show 2 possible status:
a. LED in Green, Blue 1 is turned on and ready to use
b. LED in Red, Blue 1 is in standby mode.
03. Line In
3.5mm stereo input for music player
04. PHONES
3.5mm stereo output for headphones. When plugged-
in, the speaker output will be muted. Turn down the
volume before connecting headphones
05. Display
The following information will be shown on the display
a. Input selected
*CD: CD player
*BT: Bluetooth input
*DAB INPUT: Select DAB/DAB+ Station
*FM INPUT: Select FM Station
*AUX 1/2: Other Analog Audio inputs
*DIGITAL OPT, DIGITAL COAX: Digital inputs
*LINE IN: Front panel 3.5mm stereo inputs
*USB: Playback from USB drive
b. Volume
c. FM Radio station and DAB station
d. CD/USB track name and playback time status
06. Presets
Blue 1 can store up to 40 presets for each of the FM and
DAB bands. All preset bands are available from the front
panel (presets 1-4), or from the remote control. Press
and hold the appropriate button to store the presets.
Press the button to access the stored presets
07. CD Disc Slot
Blue 1 supports Audio CD’s, MP3 les and WMA les played from
CD, CD-R or CD-RW discs. Disc can be inserted into Blue 1 in any
mode (except standby mode.). Insert the CD with label up
08. Stop/Eject
Stop CD playing or eject the CD from Blue 1
09. Play/Pause
Plays and pauses playback tracks
10. IR (infrared sensor)
Plays and pauses playback tracks
11. USB drive socket
Allow Blue 1 to play MP3, WAV, AAC les by using
a USB drive
12. Volume Control Dial
Adjust the playback volume
13. Multi-Functional Dial
Turn left/right and hold: For skipping between tracks
Press and turn, changing different audio sources
6
ON
01 02 03 04 05 06 0807
09
10
11
12
Rear Panel
7
01. Main Switch
Turn on/off Blue1
02. Bluetooth Antenna
For Bluetooth wireless streaming audio from most mobile
devices
03. Digital Input-Toslink Optical
Use a high quality TOSLINK fiber optical inter-connect
cable. This input is suitable for 16-24 bit/96kHz content.
04. DAB/FM Aerial Input
An aerial is supplied in the box. Attach the aerial and
adjust for optimum reception
05. Digital Input-S/P DIF COAXIAL
Use a high-quality digital RCA Phono inter-connect cable.
This input is suitable for 16-24 bit/192kHz content
06. Aux Input
These inputs are suitable for line level source equipment
07. REC Out
This output is suitable for line level input equipment for
audio recording
08. SUB Out
This output is for optional connection to an active
subwoofer
09. Speaker terminals
Connect the speaker wires from your right channel loudspeaker
to the Right + & - terminals and the wires from the left channel
loudspeaker to the Left + & - terminals. Please ensure that all
speaker wires are properly inserted to provide a solid electrical
connection. If the connections are loose, it could affect the sound
quality
10. AC power socket
Plug the AC power cable into an appropriate mains socket once you
have completed all connections to the Blue 1. You now are ready to
enjoy the music
11. Voltage Switch
Change input voltage when needed. To use this switch, you must
turn off Blue 1 and remove the AC power cable. CAUTION! Wrong
input voltage could damage the unit.
12. Update Only
This port is intended exclusively for system updates. (Do
not insert USB drive to this port.)
8
01. STANDBY/ON
By pressing this button, Blue 1 will switch
between standby mode (indicated by the
LED indicator in RED) and ON (indicated by
the LED indicator in Green).
02. Input Selects
By pressing these buttons, Blue 1 will
switch between different inputs
Remote Control
TONE
USB
DAB+ FM AUX1
AUX2 OPT
COAX AUTO
ST/MONO
MENU
DISPLAY
Disconnect
PROGRAM
LOUDNESS
SELECT
01
02
03
04
05
06
08
07
10
16
20
14
13
15
11 17
18
19
09
12
03. MENU
Press to access the main menu, using◄
►▲▼(04) to navigate. Press SELECT (12)
to conrm your setup
05. DISPLAY
CD MODE: Display the CD text or ID3 tag (if
supported by the CD)
Tuner MODE: Display Tuner information
DAB MODE: Display DAB station
information
Bluetooth MODE: Display paired
equipment ID, ID3 track information and
current track title. Pressing this button in
Bluetooth mode will show ID3 information in
following sequence: Title, Performer, Album,
no display
06. TUNING
FM MODE:
Press and hold: Searches for the next station
(Automatic search)
Brief press: Changes the receiving frequency
in 50kHz increments (FM) (Manual search)
DAB MODE:
Press + to select the next station, press – to
select the previous station in the DAB band
07. Numerical Buttons
FM MODE: Direct selection of a preset station
CD MODE: Direct selection of a track
08. MUTE
Switches the sound off, press again to turn on
09. VOLUME
Press + to increase the volume, press – to
decrease the volume
10. TONE/BAL
TREBLE (TONE pressed once):
The treble setting can be adjusted up or
down in 7 steps. Use the ▲and▼ buttons to
adjust the value
LINE IN
9
BASS (TONE pressed twice):
Bass setting can be adjusted up or down in 7 steps. Use
the ▲and▼ buttons to adjust the value
BALANCE:
The stereo balance can be adjusted to the right or left
in 10 steps. Use the ◄◄ and ►► buttons to adjust the
value
11. LOUDNESS
Press for the Loudness function (aurally compensated
volume correction)
12. SELECT
Press to conrm the entry
13. STOP
Press to stop the CD playing
14. CD CONTROL: PROGRAM/RANDOM/REPEAT
PROGRAM
The Stop mode must be activated to program tracks
Programming tracks on a CD in a particular order
RANDOM
Plays the tracks of a CD in random order
15. PLAY/PAUSE
Starts or pauses the playback from a CD/Track
16. SKIP BACKWARDS/SKIP
Press I◄◄ , playback starts at the beginning of the previous track
Press ►►I, Playback starts at the beginning of the next track
17. ST/MONO (in FM MODE only)
Switches between FM-Stereo and FM-Mono for FM stations
In stereo mode, the system will automatically switch to mono
reception when the signal is weak in order to improve signal-to-
noise ratios
Stereo reception is indicated by the “ST” Symbol in the display
18. AUTO (DAB MODE only)
Press to scan the DAB frequency range (band III) for stations.
These can then be accessed via the TUNING buttons
19. EJECT
Stop CD playing and eject the CD
20. Disconnect (Bluetooth)
Stop an existing Bluetooth connection and starts the pairing mode
REPEAT
Track/CD repeat playback (repeat function):
*Press once: The current track is repeated
*Press twice: The entire CD is repeated
*Press again: The repeat function is deactivated
Remote Control
10
Operating Instructions
Before Operation
Place the Blue 1 on an even surface. IMPORTANT: Do not place any objects on top
of the Blue1. The ventilation slots located on top of the device must be unobstructed
at all times.
• Speaker connections
Make sure correct polarity is maintained at each speaker connector or the sound can become
weak. The red coloured speaker terminals are positive (+) and the black speaker terminals are
negative (-).
Note: All connections are made using standard loudspeaker cable. Loosen the terminal screws
one after the other and insert the stripped ends into the holes. Re-tighten the terminal screws.
You can also use prefabricated cables with 4mm banana plugs (If using 4mm plugs, the safety
plugs must be removed from the loudspeaker connection terminals) or forked fittings. Also
observe the operating instructions for the speakers you are using.
Connections
• Connect your audio sources.
• Connect the DAB/FM antenna to the antenna connection point at the rear of the device. For later operation, the position of the
antenna should then be determined according to where the best reception is. The end of antenna should then be secured in the
appropriate position.
Reception can be improved by a suitable indoor or outdoor household antenna if the reception is poor.
• Connect the supplied mains cable to the rear and then insert the other end into a socket.
• Actuate the on/off switch on the rear side, the device is now in the standby mode.
• Switch on the device using the remote control or with the ON/STBY key on the front.
• Select your desired audio source using the input selector switch (press then turn left or right) or with the keys on the remote control.
• Sub out
If an active subwoofer is used, connect via a standard single RCA/phono cable (often referred to
as a 'Sub-Link')
Table des matières
