OPERATION INSTRUCTIONS
This appliance has polarized plug (one blade is wider than the other). As a
safety feature this plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualifiedelectrician. Do not attempt to defeat this safety feature.
The blowpro flat iron has been designed with an ALCI (Appliance Leakage
Current Interrupter) plug protective device that may make the appliance
inoperable under some abnormal conditions (such as, but not limited to,
immersion of the appliance). This protective device helps to prevent electric
shocks. If the blowpro iron does not turn on when the button is turned on, be
sure that the red reset button on the plug is depressed. In case of local
electrical interruptions, be sure to reset the plug before using it again. An
appliance that does not operate in the proper function condition is to be
discarded or returned to a service center for examination and repair.
IMPORTANT MESSAGE ABOUT ALCI SAFETY PLUG
1. “TEST” button ensures the ALCI plug device is operational.
2. “RESET” button clears the ground fault and restores the ALCI to
normal operation.
3. The ALCI should be TESTED every use.
4. When RED button extends OUT, the ALCI has operated. This discarded
or returned to a secure service center for examination and repair.
5. If there is any indication that the appliance does not operate in the
proper functioning condition, it should be returned to a service center
for examination and repair (See “LIMITED WARRANTY” Section).
This product is for household use.
This appliance is for: 110V-240V, 50/60Hz
Plug the appliance into the outlet prior to use.
