BLOTZ B10-CS-209 Manuel utilisateur

10mm 3x3 Tower Block Foyer

B10-CS-209

Please read these instructions fully before starting construction.

PVA or equivalent glue will be required to stick sections together.

Sand paper can be used to gently clean any joints.

A sharp modelling knife will be required to remove sections from the sprue. Please use knives with due

care and remember to cut away from yourself at all times.

During the construction of this model you may find it convenient to use pegs / elastic bands to hold

pieces in place while you allow glue to dry.

Foyer

Remove the inner front wall its “roof” and two

door frames from the sprue.

Attach the wall to the “roof” then glue the door

frames in position as shown.

Now remove the two side walls from the sprue.

Glue the side walls to the inner front wall assembly

aligning it using the holes/lugs provided.

Glue the outer front wall into place.

Then attach the back wall.

Glue the whole model to the base. Note there is

a “B” etched into the base which should be at the

back of the building.

Glue the door frames around the side doors and on

the back of the building.

Finally glue the sun-screens into place (etched

detail upwards).

10mm 3x3 Tower Block Middle

B10-CS-262

Please read these instructions fully before starting construction.

PVA or equivalent glue will be required to stick sections together.

Sand paper can be used to gently clean any joints.

A sharp modelling knife will be required to remove sections from the sprue. Please use knives with due

care and remember to cut away from yourself at all times.

During the construction of this model you may find it convenient to use pegs / elastic bands to hold

pieces in place while you allow glue to dry.

Middle Section

Take the four walls and base from the sprue.

Glue the walls to the base as shown aligning them

using the holes / lugs provided.

Flip the whole thing upside down and glue the

support lugs into place.

Take the twelve sun-screen strips from the sprue and

attach three to each side of the building as shown

above.

10mm 3x3 Tower Block Roof

B10-CS-310

Please read these instructions fully before starting construction.

PVA or equivalent glue will be required to stick sections together.

Sand paper can be used to gently clean any joints.

A sharp modelling knife will be required to remove sections from the sprue. Please use knives with due

care and remember to cut away from yourself at all times.

During the construction of this model you may find it convenient to use pegs / elastic bands to hold

pieces in place while you allow glue to dry.

Roof Section

Remove the base and four walls from the sprue.

Glue the walls to the base aligning them using the

holes / lugs provided.

Flip the roof assembly over and glue the four

support pieces into place as shown.

Put it back the right way up and attach the four sun-

shade pieces.

Autres manuels BLOTZ Jouet

BLOTZ

BLOTZ B06-CS-010 Manuel utilisateur

BLOTZ

BLOTZ B15-CS-002 Manuel utilisateur

BLOTZ

BLOTZ 10mm Skyscraper Dice Tower Manuel utilisateur

BLOTZ

BLOTZ B06-MW-100 Manuel utilisateur

BLOTZ

BLOTZ Shako Rocket Tosen Manuel utilisateur

BLOTZ

BLOTZ B28-OW-203 Manuel utilisateur

BLOTZ

BLOTZ B28-ST-127 Manuel utilisateur

BLOTZ

BLOTZ B20-ME-002 Manuel utilisateur

BLOTZ

BLOTZ B28-DA-008 Manuel utilisateur

BLOTZ

BLOTZ B28-WW2-303 Manuel utilisateur

BLOTZ

BLOTZ B28-WW2-301 Manuel utilisateur

BLOTZ

BLOTZ Onaga Rocket Kohaya Manuel utilisateur

BLOTZ

BLOTZ B10-CS-103 Manuel utilisateur

BLOTZ

BLOTZ B06-MW-100 Manuel utilisateur

BLOTZ

BLOTZ B28-AF-102 Manuel utilisateur

BLOTZ

BLOTZ B10-CS-102 Manuel utilisateur

BLOTZ

BLOTZ WWII Sleeping Hut 20mm Manuel utilisateur

BLOTZ

BLOTZ B20-DIDG Series Manuel utilisateur

BLOTZ

BLOTZ B28-OW-113 Manuel utilisateur

BLOTZ

BLOTZ B28-ME-009 Manuel utilisateur

BLOTZ

BLOTZ B10-CS-202 Manuel utilisateur

BLOTZ

BLOTZ B20-ME-009 Manuel utilisateur

BLOTZ

BLOTZ B06-MW-101 Manuel utilisateur

BLOTZ

BLOTZ B10-ME-009 Manuel utilisateur

Manuels Jouet populaires d'autres marques

marklin

marklin 37321 Manuel utilisateur

Canon

Canon PAPER CRAFT Manuel utilisateur

GREAT PLANES

GREAT PLANES Pitts M-12S Manuel utilisateur

NOCH

NOCH 14261 Manuel utilisateur

Hausler

Hausler 450 SE V2 Manuel utilisateur

Dynaflite

Dynaflite Daydream Manuel utilisateur

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Manuel

Kenner

Kenner Batman 63651 Manuel utilisateur

LEGO

LEGO 8527 Manuel utilisateur

iKarus

iKarus ECO 8 Manuel utilisateur

Multiplex

Multiplex EasyStar II Mode d’emploi

Walkera

Walkera 38 Mode d’emploi

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE Manuel utilisateur

MD MXION SWD Manuel utilisateur

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway Manuel utilisateur

marklin

marklin 39671 Manuel utilisateur

Meccano

Meccano 15103 Manuel utilisateur

LEGO

LEGO TECHNIC 8735 Manuel utilisateur