7
Before Riding
Seat Adjustment
Handlebar & Stem Adjustment
To adjust the seat height, open the quick
release seat post clamp. Once you’ve
reached your desired height, simply
clamp the quick release back down so
it squarely closes against the collar. If
the seat height continues to slip when
pressure is applied, you can tighten the
nut on the quick release clamp by hand.
Each Blix model has a dierent handlebar & stem combination.
You can find specific instructions on adjusting the handlebar
& stem of the Aveny/Sol, Packa, and Vika+ on our YouTube
channel, but these are some of basic instructions you can follow
for most models.
To adjust the height of the stem, loosen the stem
bolt. Ensure the stem is fully aligned to the front
wheel before tightening the bolt back down.
To adjust the angle of the stem, loosen the bolt
at the bottom of the stem. Ensure the bolt is tight
once you’ve reached your desired angle.
To adjust the angle of the handlebar, loosen the
handlebar clamp. Ensure both bolts are tight once
you have reached your desired wrist angle.
Aer adjusting your bike to your peect fit, you should be able
to sit up straight comfortably, with no strain to your shoulders,
wrists, or arms.
Tip: You should be able to comfoably touch the ground with
your toes, and should be able to fully extend your legs while
pedaling. This is the optimal height for your seat, but choose the
height that works best for you.
