BlitzWolf GW18 Pro Manuel utilisateur
Smart Watch Phone
User Guide
Please read the manual before use.
1. Safety Warning
The information in this document won't be modified or
extended in accordance with any notice.
The watch should be charging 2 hours at least before use.
Security Code
The original code is 1122,this code can prevent your watch
in use by others without your permission.
lease change the original code to insure your personal
information safe.
2.Product details:
2.1 roduct details
Power button: ower On/Off；Awaken/turn off screen；Back to
main menu
USB port:Charging/Data；
ouch screen: each function (main menu) will be shown and
displayed on capacitive touch screen.
2.2 roducts quick into
You can enter into next page by sliding screen to the left, and
return to last page by sliding screen right;enter into the notice board
after sliding from up to down, and return to main mean from down to
up.It is will be in mistake for a click if the drag distance too short.
2.3 Clock Display
Setting method：
Method 1: ower on,when the phone in clock mode,please click middle
screen and set different clock interfaces if you like.
Method 2: ower on,Main menu: setting--phone setting--standby menu
display -- unlock selection,choose the clock mode if you like.
2.4 roduct theme settings
Florid Colorful Classics
Setting method:
Main menu： Theme setting,choose the theme if you like.
2. Product quick use
3.1 Download the Sync software.
Scan QR code ，down load the A which can match your
android phone.This A only use for the Sync between watch and phone,
will not take your phone G RS.
If you already download the related softwares,please check the version
and use the newest related softwares in order to ensure all function normal
use. lease update the software when it has new one.
3.2 Install and use the Sync software
Android Application installation：
lease install the android application in your smart phone. You can
storage it into your phone memory or install by Sync assistant.
Android application usage (already installed)
(Smart phone) Setting -- Accessibility—Enter into Bluetooth
notice(service),enabled this service.（please choose “sure” when shown a
warning notices ） the application runs on the background automatically
and sync function will be switched on as below:
Click the Bluetooth notices and choose the Notification service,select
your ersonal or System application in Notify application.
Telephone service is including SMS, incoming call and seek watch.
Notice：
Please don’t shut the Bluetooth notify service when you are
clearing software by background or close background
application software.It will affect the Sync function between
watch and phone if shut it.
3.3 Bluetooth Connection and Sync function
3.3.1 From phone to watch
hone setting—turn on the Bluetooth --search for devices ，please click
pair devices when found GV08,and also choose ‘’yes ”in your mobile phone,
paired done.
lease choose “sure” when there is phone book request , meanwhile
you’d better choose” no remind again”, this is convenience when you
connect next time( without remind again),
Notice: The Sync software can open in sync A already installed and
Accessibility, the mobile will show Bluetooth connected done after 2-
5min;the watch will inform you the time of Sync with phone, than the Sync
switched on. The message will sync to you watch when it incoming to
mobile .
3.3.2 From watch to phone
BT Dialer on GV08—search new device—found your smart watch (such
as s9500) -- connect. The processes of next are same with 3.3.1
3.4 Base function
3.4.1 Message
Sync phone or watch message.
3.4.2Bluetooth
Sets the Bluetooth status, turn on/off.
3.4.3Calls records
You can check your phone call records after you connect with the
Bluetooth.
Shown all records including miss call, dialed calls and receive call; You
can check the date, time and phone number of the miss call after you
choose it, but only can call this number.
3.4.4 BT dialer
aired devices from smart watch
3.4.5 Remote notifier
When there is SMS, incoming messages from QQ and other applications
on the connected phone, the watch phone will alert you to read them.
3.4.6 Remote cameras
Use phone camera take photos, but remote by watch, its need switch
on the camera of phone in advance.
3.4.7Anti lost
Watch seek phone, or phone seek watch.
3.4.8Setting
Notice: sets clocks display and theme in phone setting. In the security
Settings, the safe code is 1122.
3.4.9 Pedometer
It can be adopted as a tool to avoid insufficient or excessive exercise by
measuring calories or calories consumption based on collected data, such
as number of steps, distance, speed, time, etc., to control exercise.
If you want return to main menu but keep pedometer during the
exercise, please press the power button.
