Blankom HCB 100 Manuel utilisateur
GmbH
a
b
ANTENNENTECHNIK
Hermann - Petersilge - Straße 1 D-07422 Bad Blankenburg
Phone: ++ 49 (0) 36 741/60-0 Telefax: ++ 49 (0) 36 741/60-100
www.blankom.de
BLANKOM Antennentechnik GmbH
·
·
·Germany
Manual Headend Controller (HCB 100 “blue” (9650.03)
Changes due to technical progress possible!
GmbH
a
b
ANTENNENTECHNIK
CONTENT
1. Set up of the network connection
2. Set up of the Web browser
3. Working with the Headend Controller (HCB 100)
4. Diagramm for the manual operation/management of the HCB 100
5. LCD display at the HCB 100
6. Changes of the Hardware
7. Additional Network components
.............................................................................
1.1 WINDOWS XP .........................................................................................................
1.2 WINDOWS 2000 ......................................................................................................
........................................................................................
2.1 Microsoft Internet Explorer .......................................................................................
....................................................
3.1 Call up the Headend Controller ................................................................................
3.2 Selection of the desired Headend overview...............................................................
3.3 Selcection of Adjustments and Configurations...........................................................
3.4 Basic settings of the Headend Controller ..................................................................
3.4.1 Reset of the HEADEND CONTROLLER .........................................................
3.4.2 Configuration of the HEADEND CONTROLLER ..............................................
3.4.3 Manual start of NIT - distribution........................................................................
3.4.4 Timer / Time controlled switching ......................................................................
3.4.5 Adjustment of Date/Time ..................................................................................
3.4.6 Cold stard of individual/single modules................................................................
3.4.7 Change of User ID, Pass word..........................................................................
3.4.8 Additional NIT - Datas .......................................................................................
3.4.9 Protocoll / Log book ..........................................................................................
3.4.10 Update of the HEAEND CONTROLLER............................................................
...........................
4.1 Configuration of the HCB 100 .....................................................................................
4.2 Adjustment possibilities of IP - Numbers ...................................................................
4.3 General Information for adjustments of the IP - Number ...........................................
.........................................................................................
5.1 Initializing of the modules after a RESET ..................................................................28
5.2 Standard Display ......................................................................................................
5.3 Error display, if a module can not be called up ........................................................
............................................................................................
...............................................................................
3
3
5
7
7
8
8
10
12
13
13
13
14
14
20
20
21
22
23
24
26
27
27
27
28
28
28
29
30
Hermann - Petersilge - Straße 1 D-07422 Bad Blankenburg
Phone: ++ 49 (0) 36 741/60-0 Telefax: ++ 49 (0) 36 741/60-100
www.blankom.de
BLANKOM Antennentechnik GmbH
·
·
·Germany
GmbH
a
b
ANTENNENTECHNIK
1. Set up of the network connection
- Entering via “Start” button of your desktop and then call up “System operation”
1.1 WINDOWS XP
Confirm LAN - connection
with douple click
(continue at page 4)
3
Hermann - Petersilge - Straße 1 D-07422 Bad Blankenburg
Phone: ++ 49 (0) 36 741/60-0 Telefax: ++ 49 (0) 36 741/60-100
www.blankom.de
BLANKOM Antennentechnik GmbH
·
·
·Germany
GmbH
a
b
ANTENNENTECHNIK
TCP/IP Protocol
installed
TCP/IP Protocol
not installed
Select TCP/IP and then press OK
4
Select “Use the following IP - Address”!!!
- Enter a valid IP - Address and Subnet mask.
- The IP - Address of the PC/Laptop has to be different
(last two figures) of the IP - Address of the HCB 100.
- The Subnet mask can be entered as shown in the
above example.
NO entries for “Gateway”, “DNS” ... are necessary.
NOTICE
Hermann - Petersilge - Straße 1 D-07422 Bad Blankenburg
Phone: ++ 49 (0) 36 741/60-0 Telefax: ++ 49 (0) 36 741/60-100
www.blankom.de
BLANKOM Antennentechnik GmbH
·
·
·Germany
GmbH
a
b
ANTENNENTECHNIK
1.2 WINDOWS 2000
5
- Entering via “Start” button of your desktop and then call up “System operation” via “Adjustments”
Confirm LAN - connection
with douple click
(continue at page 4)
Hermann - Petersilge - Straße 1 D-07422 Bad Blankenburg
Phone: ++ 49 (0) 36 741/60-0 Telefax: ++ 49 (0) 36 741/60-100
www.blankom.de
BLANKOM Antennentechnik GmbH
·
·
·Germany
GmbH
a
b
ANTENNENTECHNIK
TCP/IP Protocol
installed
TCP/IP Protocol
NOT installed
6
Select “Use the following IP - Address”!!!
- Enter a valid IP - Address and Subnet mask.
- The IP - Address of the PC/Laptop has to be different
(last two figures) of the IP - Address of the HCB 100.
- The Subnet mask can be entered as shown in the
above example.
NO entries for “Gateway”, “DNS” ...necessary.
NOTICE
Select TCP/IP and then press OK
Hermann - Petersilge - Straße 1 D-07422 Bad Blankenburg
Phone: ++ 49 (0) 36 741/60-0 Telefax: ++ 49 (0) 36 741/60-100
www.blankom.de
BLANKOM Antennentechnik GmbH
·
·
·Germany
GmbH
a
b
ANTENNENTECHNIK
2. Set up of the Webbrowser
- Open the Webbrowser, select “Extras” sand then “Internet Option”
Select“Every visit to the page” !!!
Notice
To avoid display errors please change the ,
adjustments for the storing oftemporary
Internet files.
General settings Adjustments for “Connections”
Select “No connections”
Please disconnect the access to a Proxyserver
for direct connection of the HCB 100 with
PC/Laptop.
2.1 Microsoft Internet Explorer
Please restart the PC/Laptop after all settings/adjustments are finished.
Then the connection to the Headend Controller HCB 100 can be called up via the Webbrowser.
7
Hermann - Petersilge - Straße 1 D-07422 Bad Blankenburg
Phone: ++ 49 (0) 36 741/60-0 Telefax: ++ 49 (0) 36 741/60-100
www.blankom.de
BLANKOM Antennentechnik GmbH
·
·
·Germany
GmbH
a
b
ANTENNENTECHNIK
Enter the IP - Number into the address - line.
(IP - Number ex works BLANKOM is 192.168.2.80)
The Login - window of the HCB 100 will be displayed if all adjustments/settings are correct.
You now can save/secure the operation via a password.
Selecting the configuration “Automatic Login” allows i Login without password entry (see 3.4.2).
3. Working with the Headend Controller HCB 100
3.1 Access to the Headend Controller
8
Hermann - Petersilge - Straße 1 D-07422 Bad Blankenburg
Phone: ++ 49 (0) 36 741/60-0 Telefax: ++ 49 (0) 36 741/60-100
www.blankom.de
BLANKOM Antennentechnik GmbH
·
·
·Germany
GmbH
a
b
ANTENNENTECHNIK
Enter USER ID and passwordt
User ID.......0000
Passwordt....0000
USER ID and Password ex works BLANKOM:
Writing protection has been deleted.
You will be automatically forwarded to the
“Selcetion - Menu”.
Selection of desired Headend overview table
(see 3.2)
Selection of Adjustments and Configurations
(see 3.3)
9
Hermann - Petersilge - Straße 1 D-07422 Bad Blankenburg
Phone: ++ 49 (0) 36 741/60-0 Telefax: ++ 49 (0) 36 741/60-100
www.blankom.de
BLANKOM Antennentechnik GmbH
·
·
·Germany
GmbH
a
b
ANTENNENTECHNIK
3.2 Selection of the desired Headend overview table
Headend overview (LIST)
The Headend overview (List) displays all the modules of the
entire Headend system as a List.
Selecting the button “Edit” gets you to the operation overview
of the respective module.
The Headend overview (Matrix) displays all the modules of the entire Headend system as a Matrix
Selecting the button “Edit” gets you to the operation overview of the respective module.
.
- The first line (horizontaly / here 02 and 03) displays the line-addresses of the Bus-Extender/Power supply
(BEB 100).
- The fist line (verticaly / here 01 - 07) displays the addresses of the individual modules.
as well as additional information like the module type, the synchronisation (SYNC) for digital converters,
channel name(s), respective output band and -frequencyies...
Headend overview table (Matrix)
10
Hermann - Petersilge - Straße 1 D-07422 Bad Blankenburg
Phone: ++ 49 (0) 36 741/60-0 Telefax: ++ 49 (0) 36 741/60-100
www.blankom.de
BLANKOM Antennentechnik GmbH
·
·
·Germany
Autres manuels pour HCB 100
1
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Blankom Contrôleurs
