Blade Inductrix FPV BL BNF Basic Manuel utilisateur
Instruction Manual
InductrixBrushless
Bedienungsanleitung
Manuel d’utilisation
Manuale di Istruzioni
2
EN
WARNING: Read the ENTIRE instruction manual to become
familiar with the features of the product before operating.
Failure to operate the product correctly can result in damage to
the product, personal property and cause serious injury.
This is a sophisticated hobby product. It must be operated with
caution and common sense and requires some basic mechanical
The following terms are used throughout the product literature to
indicate various levels of potential harm when operating this product:
WARNING: Procedures, which if not properly followed, create the
probability of property damage, collateral damage, and serious injury
OR create a high probability of supercial injury.
CAUTION: Procedures, which if not properly followed, create the probability
of physical property damage AND a possibility of serious injury.
NOTICE: Procedures, which if not properly followed, create a possibility of
physical property damage AND a little or no possibility of injury.
NOTICE
All instructions, warranties and other collateral documents are
subject to change at the sole discretion of Horizon Hobby, LLC. For
up-to-date product literature, visit www.horizonhobby.com and click
on the support tab for this product.
Meaning of Special Language
3EN
Age Recommendation: Not for children under 14 years.
This is not a toy.
ability. Failure to operate this Product in a safe and responsible
manner could result in injury or damage to the product or other
property. This product is not intended for use by children without
direct adult supervision. Do not use with incompatible components
or alter this product in any way outside of the instructions provided
by Horizon Hobby, LLC. This manual contains instructions for safety,
operation and maintenance. It is essential to read and follow all the
instructions and warnings in the manual, prior to assembly, setup or
use, in order to operate correctly and avoid damage or serious injury.
•Always keep a safe distance in all directions around your model to
avoid collisions or injury. This model is controlled by a radio signal
subject to interference from many sources outside your control.
Interference can cause momentary loss of control.
•Always operate your model in open spaces away from full-size
vehicles, trafc and people.
•Always carefully follow the directions and warnings for this and any
optional support equipment (chargers, rechargeable battery packs, etc.).
•Always keep all chemicals, small parts and anything electrical out of
the reach of children.
Safety Precautions and Warnings
4
EN
•Always avoid water exposure to all equipment not specically designed
and protected for this purpose. Moisture causes damage to electronics.
•Never place any portion of the model in your mouth as it could cause
serious injury or even death.
•Never operate your model with low transmitter batteries.
•Always keep aircraft in sight and under control.
•Always move the throttle fully down at rotor strike.
•Always use fully charged batteries.
•Always keep transmitter powered on while aircraft is powered.
•Always remove batteries before disassembly.
•Always keep moving parts clean.
•Always keep parts dry.
•Always let parts cool after use before touching.
•Always remove batteries after use.
•Never operate aircraft with damaged wiring.
•Never touch moving parts.
NOTICE: Consult local laws and ordinances before operating FPV (rst
person view) equipment. In some areas, FPV operation may be limited
or prohibited. You are responsible for operating this product in a legal
and responsible manner.
If you are operating this product in North America,
you are required to have an Amateur Radio (HAM) license.
Visit www.arrl.org for more information.
5EN
Table of Contents
Specications ...........................6
First Flight Preparation ..............7
Flying Checklist.........................7
Charging Warnings....................8
Installing the Propellers .............9
Install the Flight Battery...........10
BNF Transmitter Setup.............11
Transmitter
and Receiver Binding ..............11
Understanding the
Primary Flight Controls ............12
Flight Mode Selection..............14
Fly the Quadcopter..................15
Low Voltage Cutoff (LVC)..........17
Battery Level Indicator.............17
Changing the
Center LED Taillight Color ........18
Video System (BNF with FPV)...18
Troubleshooting Guide.............21
Exploded View.........................24
Parts Listings..........................25
Optional Parts.........................25
Limited Warranty.....................26
Warranty and Service
Contact Information.................31
FCC Information......................32
IC Information .........................33
Compliance Information
for the European Union............34
6
EN
Length 4.33 in (110mm)
Width 4.13 in (105mm)
Height 1.97 in (50mm)
Propeller Diameter 1.57 in (40mm)
Flying Weight 1.94 oz (55g)
Specifications
To receive product updates, special offers and more,
register your product at www.bladehelis.com.
Box Contents:
•Inductrix Brushless
7EN
First Flight Preparation
•Remove and inspect contents
•Begin charging the ight battery
•Assemble the aircraft
•Program your computer transmitter
•Install the ight battery in the aircraft (once it has been fully charged)
•Bind your transmitter
•Familiarize yourself with the controls
•Find a suitable area for ying
Flying Checklist
❏Always turn the transmitter on first
❏Plug the ight battery into the lead from the ESC
❏Allow the ESC to initialize and arm properly
❏Fly the model
❏Land the model
❏Unplug the ight battery from the ESC
❏Always turn the transmitter off last
8
EN
Charging Warnings
WARNING: Failure to comply with the following warnings could
result in product malfunction, electrical issues, excessive heat,
FIRE, and ultimately injury and property damage.
•NEVER LEAVE CHARGING BATTERIES UNATTENDED.
•NEVER CHARGE BATTERIES OVERNIGHT.
•Never charge damaged batteries. If the battery begins to swell during
charging or use, discontinue immediately.
•Always use the included battery and charger. Disconnect the battery
after charging.
•Charge batteries away from ammable materials in a well-ventilated area.
•Never charge, transport, or store batteries in hot, cold, or very sunny
places (recommended between 40–120° F or 5–49° C).
Charge the Flight Battery
CAUTION: Only use chargers specically designed to charge
the included Li-Po battery. Failure to do so could result in re,
causing injury or property damage.
CAUTION: Never exceed the recommended charge rate.
9EN
Installing the Propellers
1. Refer to the illustration for the proper motor rotation and propeller location.
2. The propellers are press t onto the motor shafts. Remove the
propellers by pulling the center hub straight up away from the motor.
3. Install the propellers by pressing the center hub over the motor shaft,
being careful not to press it too far down on the shaft. The propeller
and motor should spin freely when installed correctly.
Clockwise
Counter-
Clockwise
10
EN
Install the Flight Battery
12Throttle down Power ON
34
CAUTION: Always disconnect the Li-Po battery from the
aircraft when not ying to avoid over-discharging the battery.
Batteries discharged to a voltage lower than the lowest approved
voltage may become damaged, resulting in loss of performance and
potential re when the batteries are charged.
Ce manuel convient aux modèles suivants
1
Table des matières
Langues :
Autres manuels Blade Quadricoptère
Blade
Blade Blade 180QX HD Manuel utilisateur
Blade
Blade Glimpse BNF BLH2280 Manuel utilisateur
Blade
Blade 350 QX3 Manuel utilisateur
Blade
Blade Nano QX2 FPV Manuel utilisateur
Blade
Blade OZONE RTF BLH9700 Manuel utilisateur
Blade
Blade mQX Manuel utilisateur
Blade
Blade Scimitar 170 Manuel utilisateur
Blade
Blade Mach 25 Manuel utilisateur
Blade
Blade 350 QX Manuel utilisateur
Blade
Blade FPV Nano QX Manuel utilisateur
Blade
Blade NANO QX Manuel utilisateur
Blade
Blade Inductrix FPV HD Manuel utilisateur
Blade
Blade Chroma BLH8675 Manuel utilisateur
Blade
Blade BLH8500 Manuel utilisateur
Blade
Blade InducTrix 200 Manuel utilisateur
Blade
Blade Blade 180QX HD Manuel utilisateur
Blade
Blade NANO QX 3d Manuel utilisateur
Blade
Blade BLH02000 Manuel utilisateur
Blade
Blade CHROMA Manuel utilisateur
Blade
Blade 180 QX HD Manuel utilisateur
