Black Widow Security BW 854 Guide de l'utilisateur

Full Featured Keyless Entry System

with Optional Starter Defeat and Passive Immobilize Feature

SYSTEM MANUAL

STANDARD FEATURES

Some of the system’s standard features

include:

• Two 4-button remote transmitters

• Remote keyless entry

• LED Status indicator

• Valet switch

OPTIONAL FEATURES

This system has many optional features that

may not be compatible with some vehicles,

and may require additional parts and/or

labor. Please contact your dealer for more

details.

• Flashing Parking Lights

• Starter Defeat

• Illuminated Entry

• Trunk/hatch Release

• Passive Immobilze feature

• Horn Honk output

• Remote Panic feature

REMOTE TRANSMITTER LAYOUT

NOTE:Transmitter cosmetics may differ, but

button functions remain the same.

SYSTEM OPERATION

REMOTE LOCKING

To lock the doors press button 1:

• The horn will beep once. *

• The parking lights will flash once.*

• The doors will lock.

• The LED will turn solid for 10 seconds

then start flashing slowly.

• The optional starter defeat will

engage.*

* Optional Feature.

The optional Starter Defeat feature disables

the vehicle’s starter until button 2 is pressed,

or until the Emergency Override is

performed.

If the optional Ignition Trigger feature is

programmed, turning on the ignition before

pressing button 2 to unlock the doors will

cause the horn to honk and the lights to

flash for 30 seconds. Press button 2 to

disarm the ignition trigger and allow the

vehicle to start.

REMOTE UNLOCKING

To unlock the doors press button 2.

• The horn will beep twice.*

• The parking lights will flash twice.*

• The doors will unlock.

• The dome light will turn on.*

* Optional Feature.

NOTE: If the optional two-step unlock

feature is installed, pressing button 2 will

unlock only the driver’s door. Press button 2

again to unlock all remaining doors.

Button 1

Button 2

Button 3

Button 4

PASSIVE STARTER DEFEAT

If the optional starter defeat is installed, the

system can be programmed to automatically

disable the starter 45 seconds after turning

off the ignition as an extra measure of

security in the event the vehicle is

accidentally left unlocked. During the 45

second countdown, the LED will flash rapidly

to indicate the passive starter defeat

sequence has begun. After 45 seconds, the

LED will flash slowly and the vehicle’s starter

will be disabled.

IGNITION TRIGGER

After the system is remotely locked, turning

on the ignition before remotely unlocking

the system activates the optional ignition

trigger feature (if selected during

installation). The horn will honk and the

parking lights will flash for 30 seconds. To

deactivate the feature once triggered, press

button 2 on the transmitter or use the

override procedure (see below).

HORN OUTPUT

If the optional Horn Honk feature is

connected, the horn will provide

confirmation chirps when locking or

unlocking the doors, or when the Panic

feature is activated.

REMOTE PANIC

If the optional horn honk output is installed,

pressing button 4 for three seconds will

trigger the Panic mode.The horn will honk

and parking lights will flash for 30 seconds, or

until button 4 is pressed again.

EMERGENCY OVERRIDE

If the optional starter defeat is installed and

your remote is lost or fails to operate, you

can manually override the starter defeat.

Turn on the ignition, then press the

override/valet switch for two seconds. The

starter defeat will disengage and the system

will enter valet mode.

VALET MODE

When the system is placed into valet mode,

the optional starter defeat, ignition trigger,

and passive starter defeat will be disabled.To

put your system into valet mode, turn the

ignition on and hold the override/valet

switch for 3 seconds. The horn will chirp

once (if installed) and the LED will turn on

solid to confirm valet mode. To exit valet

mode, repeat the same procedure. The horn

will chirp twice and the LED will turn off to

confirm valet mode exit.

AUXILIARY OUTPUT

The auxiliary output may be used to activate

an optional feature such as trunk release.

Press and hold button 3 for three seconds to

activate.

ILLUMINATED ENTRY

The optional Illuminated Entry turns on the

dome light when the doors are remotely

unlocked. The dome light will remain on for

30 seconds or until the ignition is turned on.

LED STATUS MODES

Locked = Slow flash

Disarmed = Off

Passive Starter Defeat Warn = Rapid flash

Valet Mode = Solid

Before you begin the installation:

•This product must be installed by qualified

personnel according to these instructions.

• Verify with the customer the desired

location for the program switch and LED.

• Always use a multimeter when verifying

vehicle wiring.

Installation Notes:

• Do not install the main unit in the engine

compartment.

• Make all wiring connections to the vehicle

before connecting the main 15-pin

connector harness to the main unit.

• Mount the main unit in a secure area, away

from vehicle computers and heating/air

conditioning ducts. Mount the unit as far

away from metal objects as possible to

increase the range of the remote

transmitters.

• When running the harness wires through

the vehicle, be careful to run them where

they cannot be damaged or shorted. Keep

them away from any moving parts or areas of

high heat. Use rubber or plastic grommets to

protect the harness wires where they pass

through holes in metal panels.

Main Harness:

• BLACK WIRE - Ground input (-). Connect to

a solid chassis ground that is clean and free

of paint or dirt.

• RED WIRE - +12V battery input.

• WHITE WIRE - Parking light output (+).

Connect to the wire that shows +12V when

the parking lights are on. If the vehicle’s

parking light circuit exceeds 10A, a relay is

required. For vehicle’s with independent left

and right parking light circuits, the parking

light wires must be connected using diodes

to keep the circuits separate.

• WIRE - Unlock #87 normally open input

10A fuse. (see Door Lock Wiring Diagrams)

• BLUE/BLACK WIRE - Unlock #30

common output. (see Door Lock Wiring

Diagrams)

• BROWN/BLACK WIRE - Unlock #87A

normally closed input. (see Door Lock Wiring

Diagrams)

• VIOLET/BLACK WIRE - Lock #87

normally open input 10A fuse. (see Door Lock

Wiring Diagrams)

• GREEN/BLACK WIRE - Lock #30

common output. (see Door Lock Wiring

Diagrams)

• WHITE/BLACK WIRE - Lock #87A

normally closed input. (see Door Lock Wiring

Diagrams)

• ORANGE WIRE - Armed Output (-)

500Ma. The ORANGE wire provides ground

when the unit is armed to activate a starter

disable relay. Connect to a relay for starter

defeat.. (See Relay Wiring Diagrams)

• BLACK/YELLOW - Dome light output (-)

500mA. Connect to a relay to activate the

dome light when the system is unlocked. (See

Relay Wiring Diagrams)

• GRAY WIRE - Auxiliary output (-) 500mA.

Connect to a relay for optional trunk release

etc. (See Relay Wiring Diagrams)

• BROWN WIRE - Horn honk output (-)

500mA. Connect to a relay to honk the

vehicle’s horn. (See Relay Wiring Diagrams)

INSTALLATION INSTRUCTIONS

• BLUE/WHITE WIRE - Passenger unlock

output (-) 500mA. The BLUE/WHITE wire

provides a ground to unlock the passenger

doors when the unlock button on the

transmitter is pressed two times. To install

the two-step unlock feature, the

BLUE/BLACK and BROWN/BLACK wires

must be run directly to the driver’s door

actuator unlock wire and the BLUE/WHITE

wire must be connected to a relay to unlock

the passenger doors. (see Optional Two-Step

Unlock Diagrams)

• YELLOW WIRE - Ignition input (+).

Connect to the main ignition wire that

switches +12V and does not drop out during

cranking.

2-Pin Red Connector: Plug-in connector

port for LED. Mount LED in an area where

it may be easily seen from either side of the

vehicle.

2-Pin Blue Connector: Plug-in connector

port for program/service switch. Mount

program switch in an area that is easily

accessible from the driver’s position.

PROGRAMMABLE FEATURES

To enter program mode:

1. Turn on ignition.

2. Within 5 seconds, press valet switch 5

times.

• The horn will provide a long chirp, to

indicate entering program mode.

3. Press the valet switch the number times

equal to the desired feature.

• The horn will chirp and lights/LED will

flash, each time the valet switch is

pressed.

4. Within 5 seconds, press the transmitter

button corresponding to the desired

operating mode for that feature.

• The horn will chirp and lights will flash

to indicate the setting.

One chirp/flash = Button 1

Two chirps/flashes = Button 2

5. Turn off ignition to save changes.

FEATURE DESCRIPTION

1. Ignition Lock/Unlock. Automatically

locks the doors when the ignition is turned

on and unlocks when the ignition is turned

off.

2. Door Unlock Pulse. Selects between a

single or double unlock pulse.

3. Chirp Mode. Selects or bypasses the

system’s lock’unlock confirmation chirps.

4. Door Lock PulseLength. Selects

between a .75-second or 3-second

lock/unlock pulse.

5. Passive Starter Defeat. Enables the

starter defeat to automatically activate 45

seconds after turning off the ignition.

6. Ignition Trigger. Enables the ignition

trigger feature when the system is remotely

locked.

Remote Programmable Features:

Step Function Button 1 (Default) Button 2

1. Ignition Controlled Door Locks On Off

2. Door Unlock Pulse Single Double

3. Chirp Mode Standard Silent

4. Door Lock Pulse Length .75 Seconds 3 Seconds

5. Passive Starter Defeat Enable Off On

6. Ignition Trigger Feature Off On

DEFAULT RESET

To reset all programmable features to their

factory default settings:

1. Turn on ignition.

2. Within 5 seconds, press valet switch 5

times.

• The horn will provide a long chirp, to

indicate entering program mode.

3. Press transmitter button 3.The LED will

flash 3 times, pause then continue

flashing. All programmable features will

be reset to the default position.

ADDING / DELETING REMOTE

TRANSMITTERS

Adding new transmitters to the system will

automatically delete all other remotes that

were previously operating the system.

NOTE: You must code all desired remotes

at this time.The unit can learn a maximum of

three transmitters.

To enter Code Learning Mode:

1. Turn ignition key on, off, on, off, on and

leave on within 5 seconds.The horn will

chirp (if installed) and the LED / parking

lights will flash once.

2. Press and hold valet switch for 3

seconds.The horn will chirp and the LED

/ parking lights will flash 3 times.

3. Release the program switch.

4. Program all desired remotes by pressing

button 1 on each of the transmitters.

The parking lights will flash after the

system has learned each remote control.

5. Turn ignition key off. Remotes are now

programmed to the system.

FACTORY

DOOR LOCK

RELAYS

NOT USED

FACTORY

DOOR LOCK

SWITCH

VIOLET

BLUE/BLACK

BROWN/BLACK

VIOLET/BLACK

GREEN/BLACK

WHITE/BLACK

(-) DOOR LOCK

(-) DOOR UNLOCK

HARNESS

FACTORY

DOOR LOCK

RELAYS

NOT USED

FACTORY

DOOR LOCK

SWITCH

VIOLET

BLUE/BLACK

BROWN/BLACK

VIOLET/BLACK

GREEN/BLACK

WHITE/BLACK

(+) DOOR LOCK

(+) DOOR UNLOCK

HARNESS

CONNECT

TO +12V

VIOLET

BLUE/BLACK

BROWN/BLACK

VIOLET/BLACK

GREEN/BLACK

WHITE/BLACK

CONNECT

TO +12V

AFTER-MARKET

ACTUATORS

HARNESS

VACUUM PUMP

LOCK/UNLOCK

SWITCH

VIOLET

BLUE/BLACK

BROWN/BLACK

VIOLET/BLACK

GREEN/BLACK

WHITE/BLACK

CONNECT

TO +12V

CUT

HARNESS

VIOLET

BLUE/BLACK

BROWN/BLACK

VIOLET/BLACK

GREEN/BLACK

WHITE/BLACK

CONNECT

TO +12V

LOCK/UNLOCK

SWITCH

CUT FACTORY DOOR

MOTOR

CUT

HARNESS

NEGATIVE PULSE DOOR LOCK SYSTEM POSITIVE PULSE DOOR LOCK SYSTEM

ADDING ACTUATORS VACUUM DOOR LOCK SYSTEM

REVERSE POLARITY DOOR LOCK SYSTEM

DOOR LOCK WIRING DIAGRAMS

BLUE/WHITE

VIOLET

BLUE/BLACK

BROWN/BLACK

VIOLET/BLACK

GREEN/BLACK

WHITE/BLACK

LOCK/UNLOCK

SWITCH

CUT

DRIVER'S DOOR

MOTOR

PASSENGER DOOR

MOTORS

(-) DOOR LOCK

(-) DOOR UNLOCK

HARNESS

FACTORY DOOR

LOCK MODULE

CONNECT

TO +12V

CONNECT

TO +12V

BLUE/WHITE

87a 85

VIOLET

BLUE/BLACK

BROWN/BLACK

VIOLET/BLACK

GREEN/BLACK

WHITE/BLACK

LOCK/UNLOCK

SWITCH

CUT

DRIVER'S DOOR

MOTOR

PASSENGER DOOR

MOTORS

(+) DOOR LOCK

(+) DOOR UNLOCK

HARNESS

FACTORY DOOR

LOCK MODULE

CONNECT

TO +12V

VIOLET

BLUE/BLACK

BROWN/BLACK

VIOLET/BLACK

GREEN/BLACK

WHITE/BLACK

CONNECT

TO +12V

DRIVER'S DOOR

MOTOR

PASSENGER DOOR

MOTORS

CUT

LOCK/UNLOCK

SWITCH

HARNESS

BLUE/WHITE

CONNECT

TO +12V

87a 85

VIOLET

BLUE/BLACK

BROWN/BLACK

VIOLET/BLACK

GREEN/BLACK

WHITE/BLACK

CONNECT

TO +12V

DRIVER'S DOOR

ACTUATOR

HARNESS

87a 85

PASSENGER DOOR

ACTUATORS

BLUE/WHITE

CONNECT

TO +12V

TWO-STEP UNLOCK

NEGATIVE PULSE

TWO-STEP UNLOCK

POSITIVE PULSE

TWO-STEP UNLOCK

REVERSE POLARITY

TWO-STEP UNLOCK

ADDING ACTUATORS

OPTIONAL TWO-STEP UNLOCK WIRING DIAGRAMS

Black Ground (-)

Valet Switch

LED

Violet Unlock #87 Normally Open input [10A fuse]

Blue/Black Unlock #30 Common output

Brown/Black Unlock #87a Normally Closed output

Violet/Black Lock #87 Normally Open input [10A fuse]

Green/Black Lock #30 Common output

White/Black Lock #87a Normally Closed output

Orange Starter Defeat output (-) 500mA

Black/Yellow Dome Light output (-) 500mA

Gray Auxiliary output (-) 500mA

Brown/White Horn Honk output (-) 500mA

Blue/White Passenger Unlock Output (-) 500mA

Red +12V Battery input (+) [15A fuse]

White Parking Light output (+) [10A fuse]

Yellow Ignition input (+)

KEYLESS ENTRY WIRING DIAGRAM

ORANGE

WIRE

STARTER

IGNITION

SWITCH

CUT

CONNECT

TO +12V

87a 85

CONNECT

TO +12V

GRAY

WIRE

TO TRUNK RELEASE WIRE

87a 85

STARTER DEFEAT TRUNK RELEASE DIAGRAM

RELAY WIRING DIAGRAMS

HORN OR DOME

LIGHT OUTPUT

FROM ALARM

TO POSITIVE HORN HONK

OR DOME LIGHT WIRE

CONNECT

TO +12V

87a 85

HORN OR DOME

LIGHT OUTPUT

FROM ALARM

TO POSITIVE HORN HONK

OR DOME LIGHT WIRE

CONNECT

TO +12V

87a 85

HORN HONK / DOME LIGHT DIAGRAMS

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Black Widow Security Démarreur à distance

Black Widow Security

Black Widow Security BW 953 Manuel utilisateur

Black Widow Security

Black Widow Security 200 Manuel utilisateur

Black Widow Security

Black Widow Security BW 852 Manuel utilisateur

Black Widow Security

Black Widow Security BW RAS 651 Guide de l'utilisateur

Black Widow Security

Black Widow Security BW 852 Manuel utilisateur

Black Widow Security

Black Widow Security BW FM 200 K Manuel utilisateur

Black Widow Security

Black Widow Security BW FM 200 K Manuel utilisateur

Black Widow Security

Black Widow Security BW FM 6150 Manuel utilisateur

Black Widow Security

Black Widow Security BW FM 250 Manuel utilisateur

Black Widow Security

Black Widow Security BW 752 Manuel utilisateur

Black Widow Security

Black Widow Security BW FM 200 K Manuel utilisateur

Black Widow Security

Black Widow Security BW 853 Guide de l'utilisateur

Black Widow Security

Black Widow Security BW X-Z Series Guide de l'utilisateur

Black Widow Security

Black Widow Security BW RAS 100 Manuel utilisateur

Black Widow Security

Black Widow Security BW FM 250 Manuel utilisateur

Black Widow Security

Black Widow Security BW RAS 400 Manuel utilisateur

Black Widow Security

Black Widow Security BW RAS 400 Manuel utilisateur

Black Widow Security

Black Widow Security BW RAS 130 Manuel utilisateur

Manuels Démarreur à distance populaires d'autres marques

AstroStart

AstroStart 803U Manuel utilisateur

Durite

Durite 0-649-20 Manuel

EINHELL

EINHELL BT-PS 1000 Manuel

Linear

Linear ACCESS AK-21 Caractéristiques techniques

Soundstream

Soundstream TARANTULA RS.2 Manuel utilisateur

Jaycar Electronics

Jaycar Electronics MB3752 Manuel utilisateur

Ultra Start

Ultra Start 72 Series Manuel utilisateur

ADS

ADS FLASHLOGIC FLRSVW1 Manuel utilisateur

Selecta

Selecta JS012 Manuel utilisateur

Vector

Vector Power City DK080706 Supplément

Code Alarm

Code Alarm CA-535 Manuel utilisateur

Ozito

Ozito OJS-800 Manuel utilisateur

Profi-Partner

Profi-Partner 46387 Manuel utilisateur

EZ STARTER

EZ STARTER EZ-45 Manuel utilisateur

Viper

Viper 4204 Manuel utilisateur

Essex Electronics

Essex Electronics KE-1701 Manuel utilisateur

EINHELL

EINHELL EGS 3600 Manuel

Rooboost

Rooboost RB-1750WP Manuel utilisateur