Black Box PSE505 Series Manuel utilisateur
Power Switch Office/Cabinet 4-Port
JUNE 2004
PSE505-
X
X
PSE506-xx
F
REE technical support
SUPPORT
1
CE STATEMENT
1
This product carries the CE mark to indicate compliance with the
European Directive on Electromagnetic Compatibility (89/336/EEC). It
has been tested to EN55024:1998 and EN55022:1998.
2
POWER SWITCH
2
The Office/Cabinet Power Switch is an extension lead that enables you,
through an Ethernet 10Base-T network, to switch on or off the power
supply of any electric device.
The built-in mini Web server allows individual control of the four
sockets, using a browser.
3
CONTENTS
3
Contents
Chapter
1. Safety instructions ............................................................................. 5
2. Connecting Power Switch ................................................................. 7
3. Configuration..................................................................................... 8
3.1 Configuration using the Finder program.................................... 10
3.2. Configuration using a Web browser.......................................... 12
3.3. Configuration using a Terminal Connection ............................. 14
4. Security parameters ......................................................................... 16
5. Serial port pin configuration............................................................ 18
6. Control the power outlets ................................................................ 19
6.1 Control the powers outlet using a Web browser ........................ 19
6.2 Control the power outlets using a serial connection................... 20
7. Technical Data................................................................................. 22
4
POWER SWITCH
4
5
CHAPTER 1: Safety instructions
5
1. Safety instructions
To be read before use!
• The Office/Cabinet Power Switch devices can only be installed
by qualified people with the following installation and use
instructions. The manufacturer disclaims all responsibility in
case of a bad utilisation of the Office/Cabinet Power Switch
devices and particularly any use with equipments that may cause
personal injury or material damage.
• This equipment is designed to be installed on a dedicated circuit
that must have a circuit breaker or fuse protection.
• The electrical power socket used to plug the power cord of the
Office/Cabinet Power Switch device must be close to the
Office/Cabinet Power Switch device and easily accessible.
• Check that the power cords, plugs and sockets are in good
condition.
• The Office/Cabinet Power Switch devices can only be connected
to three-wire 230 VAC (50-60Hz) sockets.
• Always plug the Office/Cabinet Power Switch devices into
properly grounded power sockets (two poles plus ground).
• Never exceed 10 Amp total load.
• If you have to replace an external fuse of an Office/Cabinet
Power Switch device, never use another type of fuse than
10A/250V T.
6
POWER SWITCH
6
• The Office/Cabinet Power Switch devices are intended for
indoor use only. Do NOT install them in an area where excessive
moisture or heat is present.
• Always disconnect the power cord of the Office/Cabinet Power
Switch device if you want to intervene on the Office/Cabinet
Power Switch device or on the equipment powered from the
Office/Cabinet Power Switch device.
• The power outlets of the Office/Cabinet Power Switch devices
are not circuit breakers! If you want to intervene on equipment
connected to an Office/Cabinet Power Switch device you must
disconnect this equipment from the Office/Cabinet Power Switch
device.
• The Office/Cabinet Power Switch devices contain potentially
hazardous voltages. Do NOT attempt to disassemble them.
• The Office/Cabinet Power Switch devices contain no user
serviceable parts and repairs are to be performed by factory
trained service personnel only.
7
7
CHAPTER 2: Connecting Power Switch
2. Connecting Power Switch
1. Connect the supplied configuration cable to an available serial port
on your computer and to the serial port of the Office/Cabinet
Power Switch.
Notes:
The serial cable provided with Office/Cabinet Power Switch is a
standard straight cable with DB9 plug / socket.
You may use any other straight serial cable. For EMC reasons, we
advise you not to use cables above 3 meters long.
2. Connect your 10BaseT cable (max. 100 meters) to the network
port.
3. To connect Office/Cabinet Power Switch to the mains, plug the
cable into a grounded socket. The Pwr LED flashes on to confirm
that power is on. If not, try another socket.
8
POWER SWITCH
8
3. Configuration
To use the Office/Cabinet Power Switch on your network you must
first configure its network parameters. Ask your network administrator
for the parameters to use.
There are three different methods to configure the Office/Cabinet
Power Switch:
Method 1:
Through a network using the Office/Cabinet Finder Program (on the
delivered CD).
It is the simplest and fastest configuration method if you use Windows
as operating system. We suggest that you use this program at least
during the first configuration: it allows you to configure your
Office/Cabinet Power Switch through your local network even if its
network parameters (IP Address, Subnet mask and Port) are not
compatible with those of your PC or your local network.
If you decide to use this method you can directly go to §3.1
"Configuration using the Finder program".
Method 2:
Through a network using a Web browser (Internet Explorer > 6.0 and
Netscape > 6.1).
This method can only be used if the network parameters of the
Office/Cabinet Power Switch (IP Address, Subnet mask…) have
already been configured using either the Finder program (Method 1) or
using a Terminal program (Method 3).
For the first configuration you can also change the Network parameters
of your PC according to the default settings of the Office/Cabinet
Power Switch.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Black Box Unité de distribution d'énergie
Black Box
Black Box Power View PS570A Manuel utilisateur
Black Box
Black Box Power View PS570A Manuel utilisateur
Black Box
Black Box Dual-Circuit Power Distribution Unit Manuel utilisateur
Black Box
Black Box ACR1000-CPH8R-R2 Manuel utilisateur
Black Box
Black Box PSE544-DE-R2 Manuel utilisateur
Black Box
Black Box Remote Power Manager 16 Manuel utilisateur
Black Box
Black Box PS590A Manuel utilisateur
Black Box
Black Box CARTTIMER1 Manuel utilisateur
Black Box
Black Box Remote Power Manager Manuel utilisateur
Black Box
Black Box ServPower Omni PS730A Manuel utilisateur
