Black Box TS870A Manuel utilisateur

Black Box Corporation • 1000 Park Drive • Lawrence, PA 15055-1018 • Tech Support: 724-746-5500 • www.blackbox.com • e-mail: [email protected]

Black Box Corporation.

1/18/2005 #26365

Test for shorts, opens,

miswires, reversals,

and split pairs.

Cable test results are

displayed in wire map

format with a message

line for shorts and split

pairs.

Automatic start-up

and shutdown: just

plug both ends of the

cable into the tester.

Two-line by

16-character

alphanumeric LCD

with icons shows

clear results.

est new or installed premise

wiring for networks and data

systems with the LANTest or

LANTest Pro Kit. It checks

shielded and unshielded UTP and

STP CAT3, CAT4, CAT5, and CAT6,

and also coax cables. (Adapters

for coax are included with the

LANTest Pro Kit.)

Use the tester three ways:

without the remote, with the

remote, or with the Network

Probe (TS155-R3).

To check for shorts, opens,

and split pairs, you won’t need the

remote. But to test for miswires

and reversals, you’ll need the

remote.

You can also use the tester

with the Network Probe to

generate a tone for testing.

The LANTest Pro CAT5e

Tester/Analyzer Kit includes eight

remotes for testing cable runs to

more than one endpoint. The

length range is 6 to 320 feet (1.8 to

Measure cable lengths and

find faults quickly for up to

eight cable endpoints.

KeyFeatures

LANTESTANDLANTESTPROCAT5ETESTER/ANALYZERS

97.5 m) for both the LANTest and

LANTest Pro.

The tester includes a 9-V

alkaline battery and operates in

four modes:

• Cable testing mode. With no

remote attached, the

LANTest checks for shorts,

opens, and split pairs. When

the remote is attached, the

LANTest also checks for

miswires and reversals.

• Length measurement mode.

Measure the length of a

cable in auto select, or

choose each pair to

measure length individually.

Adjust the cable parameter

by the capacitance per unit

length value, or by a known

length of cable.

• Setup mode. Select either

shielded twisted-pair (STP)

cable or unshielded twisted-

pair (UTP) cable. Beeper

on/off and units of measure

are also selectable

variables.

• Tone generator mode.

Select individual wires and

pairs to carry a tone. To

trace tones, you’ll also need

to order the Network Probe.

Here’s how it works:

Suppose you have a jumble

of cables in a wiring closet.

One of these cables runs to

a nearby office. To find the

other end of the office cable

in the closet, you can use

the tester to generate a tone.

Then, when you wave the

Network Probe near the

bundle of cables, the probe

will beep when it locates the

desired cable.

When you need to find cable

length, test for shorts, opens,

miswires, reversals, and split

pairs, or trace cable, choose the

LANTest CAT5e Tester/Analyzer.

If you need additional remotes to

test multiple cable runs, select the

LANTest Pro CAT5e Tester/

Analyzer Kit.

LANTest CAT5e Tester/Analyzer (TS870A)

• (1) LANTest main unit

• (1) remote unit

• (2) 1-ft. (0.3-m) jumper cables

• (1) 9-V alkaline battery

• (1) carrying case

• (1) users’ manual

LANTest Pro CAT5e Tester/Analyzer Kit (TS875A)

• (1) LANTest main unit

• (8) remote units

• (2) 1-ft. (0.3-m) jumper cables

• (1) RJ-45 to (2) alligator clips cable

• (2) RJ-45 to F coax adapters

• (1) 9-V alkaline battery

• (1) carrying case

• (1) users’ manual

Cable Test Lengths:

Maximum: 320 ft. (97.5 m);

Minimum: 6 ft. (1.8 m)

Cable Types: Shielded or

unshielded CAT3, CAT4, CAT5,

CAT5e; coax (with adapters

attached)

Switch: To prevent the 20-second

“no activity” power off,

periodically press the “fault

check/tone” switch

Typical Alkaline Battery Life:

Cable Testing: 120 hours (times

are for the full capacity of the

battery used continuously in

cable testing mode)

Connectors: TS870A, TS875A:

(1) RJ-45 female

Temperature: Operating: 32 to 122°F

(0 to 50°C);

Storage: -4 to +158°F (-20 to

+70°C)

Humidity: 10 to 90%,

noncondensing

Power: (1) 9-V alkaline battery

Size: 5.7"H x 2.9"W x 1.2"D (14.5 x

7.4 x 3 cm)

Weight (with battery installed):

0.4 lb. (0.2 kg)

What’sIncluded Specifications

Ordering Information

ITEM CODE

For testing cable to a single point, order…

LANTest CAT5e Tester/Analyzer (1 Remote).........TS870A

For multipoint testing, order…

LANTest Pro CAT5e Tester/Analyzer Kit

(8 Remotes) ...............................................................TS875A

For tracing tones, order…

Network Probe..........................................................TS155-R3

Recognize any of these

situations?

• You wait more than 30

minutes to get through to a

vendor’s tech support.

• The so-called “tech” can’t

help you or gives you the

wrong answer.

• You don’t have a purchase

order number and the tech

refuses to help you.

• It’s 9 p. m. and you need help,

but your vendor’s tech

support line is closed.

According to a survey by Data

Communications magazine, 90%

of network managers surveyed

say that getting the technical

support they need is extremely

important when choosing a

vendor. But even though network

managers pay anywhere from 10

to 20% of their overall purchase

price for a basic service and

support contract, the technical

support and service they receive

falls far short of their

expectations—and certainly isn’t

worth what they paid.

At Black Box, we guarantee

the best value and the best

support. You can even consult our

Technical Support Experts before

you buy if you need help selecting

just the right component for your

application.

Don’t waste time and

money—call Black Box today.

WhyBuyFromBlackBox?ExceptionalValue.ExceptionalTechSupport.Period.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Black Box Accessoires réseau

Black Box

Black Box SP340A-R3 Manuel utilisateur

Black Box

Black Box TS605A Manuel utilisateur

Black Box

Black Box IC135A Manuel utilisateur

Black Box

Black Box ME657A-M Manuel utilisateur

Black Box

Black Box TS760A Manuel utilisateur

Black Box

Black Box ME745A-M-R2 Manuel utilisateur

Black Box

Black Box MED100A Manuel utilisateur

Black Box

Black Box KV102A Manuel utilisateur

Black Box

Black Box MT148A Manuel utilisateur

Black Box

Black Box ME540A-ST Manuel utilisateur

Black Box

Black Box ME190A Manuel utilisateur

Black Box

Black Box LD485S-MP Manuel utilisateur

Black Box

Black Box ME521A Manuel utilisateur

Black Box

Black Box MT132V-R2 Manuel utilisateur

Black Box

Black Box PRO SWITCHING SYSTEM II Manuel utilisateur

Black Box

Black Box IS200A-R2 Manuel utilisateur

Black Box

Black Box TS500A-R2 Manuel utilisateur

Black Box

Black Box AC3004A Manuel utilisateur

Black Box

Black Box ME729A-FSP Manuel utilisateur

Black Box

Black Box ME444A-530-R3 Manuel utilisateur

Black Box

Black Box IC150A Manuel utilisateur

Black Box

Black Box TS254A Manuel utilisateur

Black Box

Black Box AC640A Manuel utilisateur

Black Box

Black Box ME550A-35 Manuel utilisateur

Manuels Accessoires réseau populaires d'autres marques

Valcom

Valcom VIP-804 Manuel utilisateur

SKUTCH

SKUTCH BA-1000 Manuel du produit

QUNDIS

QUNDIS RNN5 Manuel utilisateur

Asus

Asus AAEON FWS-2365 Manuel utilisateur

Sophos

Sophos XG 85w Manuel utilisateur

AMCI

AMCI RBE2-8 Manuel utilisateur

Patton electronics

Patton electronics 2888 Manuel utilisateur

Cradlepoint

Cradlepoint COR IBR1100/IBR1150 Manuel utilisateur

Paradyne

Paradyne Hotwire 8620 Manuel utilisateur

Infra Cool

Infra Cool F-1.3 Manuel utilisateur

Edgewater Networks

Edgewater Networks 4300T Manuel utilisateur

Edimax

Edimax SB-2200g Manuel utilisateur

Extreme Networks

Extreme Networks Mogul-100 Manuel utilisateur

Aaeon

Aaeon FWS-8500 Manuel utilisateur

Panduit

Panduit Z11C Series Manuel utilisateur

F5 BIG-IP 10000 Series Instructions de montage

ZyXEL Communications

ZyXEL Communications NMA1115 Manuel utilisateur

Auerswald

Auerswald COMtrexx Business Manuel utilisateur