Black Box FA012 Manuel utilisateur

1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746

© Copyright 1999. Black Box Corporation. All rights reserved.

CUSTOMER

SUPPORT

INFORMATION

Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX

FREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746

Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com • E-mail: [email protected]

NOVEMBER 1999

FA012

FA022

RS-232 Connector Kit

2

RS-232 CONNECTOR KIT

1. Introduction

1.1 Description

The RS-232 Connector Kit is a complete kit for assembling an RS-232 connector.

Part number FA012 contains a male RS-232 connector; part number FA022

contains a female RS-232 connector.

1.2 What the Package Includes

The FA012 includes:

• (1) DB25 male shell

• (25) male crimp pins

• (1) set of male screw locks

• (1) hood assembly

The FA022 includes:

• (1) DB25 female shell

• (25) female crimp pins

• (1) set of female screw locks

• (1) hood assembly

2. Assembly

Refer to the illustration on the next page as you assemble the connector.

1. Crimp the pins onto the end of the cable that you want to insert into the

connector.

2. Insert the pins into the desired locations on the connector.

3. Slide the small U-shaped bracket of the screw-lock assembly over the

mounting hole in the connector. Insert a small screw through this bracket

and connector. Make sure the threaded end of the screw is at the same end as

the connector pins. Repeat this procedure for the other hole.

3

RS-232 CONNECTOR KIT

4. Place the connector in one of the hood shells, making sure that the cable is

exiting through the hole provided.

5. Insert the threaded screw into the square nut. With the head of the screw

facing out, set this assembly in the notch next to the hole in the hood for the

cable.

6. Insert the wedge-shaped piece of plastic between the cable and the screw

assembly from step #4.

7. Attach the two shells together by inserting the three screws through the holes

in the hood. Tighten the screws enough to hold the assembly in place.

8. Tighten the strain-relief screw. This screw applies pressure to the cable to

prevent it from being pulled out of the assembly.

9. Securely tighten the screw that holds the two hood halves together.

10. The connector is now properly assembled.

Figure 1. Connector Assembly.

Pin

Shell

Hood

Relief Screw

Plastic Wedge

Screwlock

Ce manuel convient aux modèles suivants

1

Table des matières

Autres manuels Black Box Câbles et connecteurs

Black Box

Black Box 26558 Manuel utilisateur

Black Box

Black Box Fiber Optic Bulk Cable Manuel utilisateur

Black Box

Black Box MD940A-F Manuel utilisateur

Black Box

Black Box VSP-HDMI2-1X4 Manuel utilisateur

Black Box

Black Box MC140A Manuel utilisateur

Black Box

Black Box TL421A Manuel utilisateur

Black Box

Black Box JPM110A-R2 Manuel utilisateur

Black Box

Black Box AC156A-8 Manuel utilisateur

Black Box

Black Box MT-RJ Multimode Fiber Optic Cable Manuel utilisateur

Black Box

Black Box AVSP-DVI1X2 Manuel utilisateur

Black Box

Black Box CAT6a Manuel utilisateur

Black Box

Black Box GigaTrue CAT6 JPM610A-R8 Manuel utilisateur

Black Box

Black Box V.11 LS Manuel utilisateur

Black Box

Black Box Mini Driver MP Manuel utilisateur

Black Box

Black Box AC3010A Manuel utilisateur

Black Box

Black Box TS220A Manuel utilisateur

Black Box

Black Box PC to Printer Cables Manuel utilisateur

Black Box

Black Box IEEE 802.3 Manuel utilisateur

Black Box

Black Box MT243A Manuel utilisateur

Black Box

Black Box DRD-4 Manuel utilisateur

Black Box

Black Box 25522 Manuel utilisateur

Black Box

Black Box VSP-DLDVI1X2 Manuel utilisateur

Black Box

Black Box AC552A-2 Manuel utilisateur

Black Box

Black Box Micro T1 CSU Manuel utilisateur

Manuels Câbles et connecteurs populaires d'autres marques

Philips

Philips SWA6310 Manuel utilisateur

StarTech.com

StarTech.com CRJ4550PK Manuel utilisateur

Nohau

Nohau EMUL-IP2K-PC Manuel utilisateur

Foxun

Foxun SX-SP144E-HD4K2K Manuel utilisateur

Philips

Philips SWA3305W Manuel utilisateur

opticis

opticis Stretch DVIM1-1P0x Manuel utilisateur

Volkswagen

Volkswagen VAS 6558A Manuel utilisateur

NEXIBO

NEXIBO N-13 Manuel utilisateur

CYP

CYP PU-1H3HBTL Manuel utilisateur

Allen-Bradley

Allen-Bradley 1784-u2dhp Manuel utilisateur

Global Caché

Global Caché Flex Link Blaster Manuel utilisateur

Hauppauge

Hauppauge USB-Live2 Manuel utilisateur

Fenix

Fenix MPSV 15 Manuel utilisateur

BEGA

BEGA 71 085 Manuel utilisateur

Tesla

Tesla HPWC Manuel utilisateur

GAMERON

GAMERON LUXURY TV CABLE Manuel utilisateur

molex

molex Milli-Grid Dual row 87568 Series Manuel utilisateur

Burndy

Burndy Continental Industries thermOweld CRE-7 Manuel utilisateur