Black Box AC154A-2 Manuel utilisateur

Compact CAT5 Audio/Video Splitters
December 2001
AC154A-2
AC154A-8
AC154A-2
2-Channel
AC154A-8
8-Channel
Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX
FREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
CUSTOMER
SUPPORT
INFORMATION

Compact CAT5 Audio/Video Splitter
1
TRADEMARKS USED IN THIS MANUAL
BLACK BOX and its logo are registered trademarks of Black Box
Corporation.
Apple and Macintosh are registered trademarks of Apple Computer, Inc.
IBM is a registered trademark of International Business Machines
Corporation.
SGI is a registered trademark of Silicon Graphics, Inc.
Sun and Sun Microsystems are registered trademarks of Sun Microsystems,
Inc. in the United States and other countries.
Any other trademarks mentioned in this manual are acknowledged to be
the property of the trademark owners.

Compact CAT5 Audio/Video Splitter
2
FEDERAL COMMUNICATIONS COMMISSION
AND CANADIAN DEPARTMENT OF COMMUNICATIONS
RADIO FREQUENCY INTERFERENCE STATEMENTS
This equipment generates, uses, and can radiate radio frequency energy
and if not installed and used properly, that is, in strict accordance with
the manufacturer’s instructions, may cause interference to radio
communication. It has been tested and found to comply with the limits
for a Class A computing device in accordance with the specifications in
Subpart B of Part 15 of FCC rules, which are designed to provide
reasonable protection against such interference when the equipment is
operated in a commercial environment. Operation of this equipment in
a residential area is likely to cause interference, in which case the user
at his own expense will be required to take whatever measures may be
necessary to correct the interference.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
This digital apparatus does not exceed the Class A limits for radio
noise emission from digital apparatus set out in the Radio Interference
Regulation of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques
dépassant les limites applicables aux appareils numériques de la classe
Aprescrites dans le Règlement sur le brouillage radioélectrique publié
par le ministère des Communications du Canada.
EUROPEAN UNION DECLARATION OF CONFORMITY
This product complies with the requirements of the European EMC
directive 89/336/EEC

Compact CAT5 Audio/Video Splitter
3
Normas Oficiales Mexicanas (NOM)
Electrical Safety Statement
INSTRUCCIONES DE SEGURIDAD
1. Todas las instrucciones de seguridad y operación deberán ser leídas
antes de que el aparato eléctrico sea operado.
2. Las instrucciones de seguridad y operación deberán ser guardadas para
referencia futura.
3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de
operación deben ser respetadas.
4. Todas las instrucciones de operación y uso deben ser seguidas.
5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo,
cerca de la tina de baño, lavabo, sótano mojado o cerca de una alberca,
etc.
6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales
que sean recomendados por el fabricante.
7. El aparato eléctrico debe ser montado a la pared o al techo sólo como
sea recomendado por el fabricante.
8. Servicio—El usuario no debe intentar dar servicio al equipo eléctrico
más allá a lo descrito en las instrucciones de operación. Todo otro
servicio deberá ser referido a personal de servicio calificado.
9. El aparato eléctrico debe ser situado de tal manera que su posición no
interfiera su uso. La colocación del aparato eléctrico sobre una cama,
sofá, alfombra o superficie similar puede bloquea la ventilación, no se
debe colocar en libreros o gabinetes que impidan el flujo de aire por los
orificios de ventilación.
10. El equipo eléctrico deber ser situado fuera del alcance de fuentes de
calor como radiadores, registros de calor, estufas u otros aparatos
(incluyendo amplificadores) que producen calor.

Compact CAT5 Audio/Video Splitter
4
11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo
del tipo descrito en el instructivo de operación, o como se indique en el
aparato.
12. Precaución debe ser tomada de tal manera que la tierra fisica y la
polarización del equipo no sea eliminada.
13. Los cables de la fuente de poder deben ser guiados de tal manera que no
sean pisados ni pellizcados por objetos colocados sobre o contra ellos,
poniendo particular atención a los contactos y receptáculos donde salen
del aparato.
14. El equipo eléctrico debe ser limpiado únicamente de acuerdo a las
recomendaciones del fabricante.
15. En caso de existir, una antena externa deberá ser localizada lejos de las
lineas de energia.
16. El cable de corriente deberá ser desconectado del cuando el equipo no
sea usado por un largo periodo de tiempo.
17. Cuidado debe ser tomado de tal manera que objectos liquidos no sean
derramados sobre la cubierta u orificios de ventilación.
18. Servicio por personal calificado deberá ser provisto cuando:
A: El cable de poder o el contacto ha sido dañado; u
B: Objectos han caído o líquido ha sido derramado dentro del aparato;
o
C: El aparato ha sido expuesto a la lluvia; o
D: El aparato parece no operar normalmente o muestra un cambio en su
desempeño; o
E: El aparato ha sido tirado o su cubierta ha sido dañada.

Compact CAT5 Audio/Video Splitter
5
Contents
1. Introduction ...............................................................................page 6
1.1 General ................................................................................page 6
1.2 Features ...............................................................................page 6
2. Installation .................................................................................page 7
3. Operation ...................................................................................page 9
4. Troubleshooting.......................................................................page 10
4.1 Problem Solving FAQ........................................................page 10
4.2 Calling Black Box..............................................................page 12
4.3 Shipping & Packaging........................................................page 12
5. Specifications...........................................................................page 13

Compact CAT5 Audio/Video Splitter
6
1. Introduction
1.1 General
The Models AC154A-2 and AC154A-8 are respectively 2 and 8-
channel UTP (CAT5) VGA video splitters (senders) with audio. The
devices convert a PC's VGA and audio signals into a format that can be
transmitted using a single inexpensive and commonly available
Category-5 Unshielded Twisted Pair (UTP) cable with RJ45
connectors, which are used in most Local Area Networks.
At the receiving (remote) end a matching receiver (Model AC155A –
sold separately) is used to convert the UTP signal back to VGA and
audio.
The devices are housed in compact shielded enclosures and include
connectors for the local monitor and speakers as well as multiple RJ45
connectors for connection to remote monitors.
Included with the devices are: a small power adapter, and short video
and audio cables for connection to the PC’s VGA and sound card’s
outputs.
The RJ45 outputs can drive CAT5 LAN cables to 500 feet (152 meters)
with little to no degradation of video quality. A proprietary circuit in the
receiver is used to compensate for signal losses in long cable runs.
1.2 Features
•Buffered video and pass-through audio outputs for connection
to local monitor and speakers
•Support resolutions up to 1280x1024 at any refresh rate
•Rugged, Reliable, Compact size
•No software required
•Drive standard CAT5 cables to 500 feet
•Transmit audio and video signals on one cable
•Easily expandable by daisy-chaining the local in/out ports

Compact CAT5 Audio/Video Splitter
7
2. Installation
1. Connect the VGA IN and AUDIO IN connectors of the AC154A to
the computer's video and speaker ports using the supplied cables
(see figures 2.1 and 2.2).
2. Connect the local monitor and speakers to the device's VGA OUT
and AUDIO OUT connectors respectively. (see Figure 2.3)
NOTE
To expand the number of outputs, use these ports to daisy
chain to another AC154A’s VGA and audio inputs. Connect the
local monitor and speakers to the last unit in the chain.
3. Connect the supplied power adapter to the power input connector
on the unit.
Figure 2.1
Figure 2.2 Figure 2.3

Compact CAT5 Audio/Video Splitter
8
4. Using Category-5 cable connect one or more AC155A receivers to
the unit's RJ45 outputs. The outputs are labeled PORT A and
PORT B on the AC154A-2 or OUT 1 through OUT 8 on
AC0154A-8.
5. Connect the remote monitor and speakers to the receiver unit and
attach the power adapter to the receiver. Please refer to AC155A
User’s Manual for further details.
CAUTION
Before plugging in your remote monitor, verify that the AC line is
properly wired and that a protective ground (green) wire is
established with NO potential difference between both the sender
and receiver locations (The UTP splitter can tolerate up to 5 v peak-
to-peak ground noise between the two locations) . Failure to ensure
good grounding can result in erratic operation and possible shock
hazards with severe damage to your equipment. If an LCD is being
used at the remote location, verify that the LCD ground is tied to
power-line ground. If not, then ground the receiver unit by adding a
ground strap (see troubleshooting section for more information).
NOTICE
Do not connect this unit to any LAN device such as network cards
or hubs as this may damage the AC155A and/or the LAN device. Use
EIA/TIA 568B standard straight-through patch wiring as shown
below. Do not use crossover cables.
EIA/TIA 568B WIRING STANDARD
PIN Wire Color
1White w/ Orange Stripe
2Orange
3White w/Green Stripe
4Blue
5White w/Blue Stripe
6Green
7White w/Brown Stripe
8Brown

Compact CAT5 Audio/Video Splitter
9
3. Operation
The video signal is fully terminated and buffered for the local video
output connector. This means that terminating or plugging a local
monitor is not necessary and this connector can be left open.
The stereo audio input is passed through to the local audio output
connector and the audio integrity is fully preserved. The transmitted
audio in the CAT5 cable to the remote receiver is monaural. The audio
outputs are “line-level” and powered speakers are required.
Assuming that there are no major grounding or large EMI noise
problems present, the video quality at the remote station depends on the
length of the CAT5 cable, actual video resolution and refresh rate.
The Model AC155A receiver employs proprietary user settable video
compensation to enhance the image quality when long cables are used.
In general at low and mid resolutions excellent image reproduction is
provided at up to 500 feet. At high resolution and refresh rates perfect
image reproduction can be achieved at shorter distances (see table 3.1
below). Using longer cables or higher resolution rates will still produce
an image, but the reproduction quality will be reduced.
Refresh Rate
60 Hz 75 Hz 85 Hz
640x480 500 ft 500 ft 500 ft
800x600 500 ft 500 ft 400 ft
1024x768 500 ft 400 ft 350 ft
Resolution
1280x1024 500 ft350 ft 300 ft
Table 3.1
Autres manuels pour AC154A-2
1
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Black Box Accessoires

Black Box
Black Box AC044A-R2 Manuel utilisateur

Black Box
Black Box AC063A Manuel utilisateur

Black Box
Black Box AC056A-R4 Manuel utilisateur

Black Box
Black Box AC130A Manuel utilisateur

Black Box
Black Box AC090A Manuel utilisateur

Black Box
Black Box AC176A Manuel utilisateur

Black Box
Black Box AC088A-R2 Manuel utilisateur

Black Box
Black Box AlertWerks Series Manuel utilisateur

Black Box
Black Box AC090A Manuel utilisateur

Black Box
Black Box AC056AE-R2 Manuel utilisateur




















