Black & Decker BDRV1 Manuel utilisateur
INSTRUCTION MANUAL
Robot Vacuum with Mapping
Technology
Please read before returning this product for any reason.
BDRV1
TABLE OF CONTENTS
Safety1 - 2
Setting Up The Roboseries9
Dustbin Overview5
Main Brush Maintenance12
Maintaining the Dustbin and Filters13
In The Box3
Robot Indicators6
Using the Black + Decker Home App10
Side Brush and Sensor Maintenance14
Product Overview4
Setting up the Charging Dock7 - 8
Using Your Roboseries and Remote11
Battery Maintenance15
Roboseries Troubleshoot16
Warranty17
1
SAFETY
SAFETY DEFINITIONS
WARNING: Indicates a hazardous situation that, if not avoided, could result in death or serious injury.
CAUTION: Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
NOTICE: Indicates a hazardous situation that, if not avoided, could result in property damage.
Before using this product, please read the following safety instructions and follow all safety precautions. Any operation inconsistent with this instruction manual
may cause damage to this product.
• Your robot is not a toy. Small children and pets should be supervised when your robot is operating.
• Do not sit or stand on your robot.
• Do not use unauthorized chargers. Use of an unauthorized charger could cause the battery to generate heat, smoke, catch fire or explode. Contact customer
service for a replacement charger.
• Do not open your robot except as instructed to maintain the dustbin and filter(s). Do not open the charging dock as there are
no user serviceable parts inside.
• Risk of electric shock. Only use indoors and in dry locations.
• Do not handle your robot with wet hands.
• Store and operate your robot in room temperature environments only.
• Do not operate the robot in areas with exposed electrical outlets in the floor.
• Do not attempt to open, crush or heat the battery of your robot above 175˚F.
• Do not subject the battery to mechanical shock.
• Do not operate the vacuum without the dustbin installed.
• Do not short circuit the battery of your robot by allowing any metal objects to contact the battery terminal.
• Do not immerse the battery in liquid.
• Do not attempt to charge damaged or leaking battery packs. If battery leakage occurs, thoroughly wash any aected skin, making sure to keep battery acid
away from eyes, ears, nose and mouth. Immediately wash any clothing or other surface that comes in contact with leaked battery acid. If a chemical burn
occurs or if irritation persists, seek medical attention.Dispose according to Local, State or Federal regulations.
• If the robot passes over a power cord there is a chance an object can be pulled o a table. Before using the robot, clear the floor of objects such as clothing,
cords for blinds, curtains, power cords and any fragile objects which can be easily damaged.
• Do not use the robot to pick up sharp objects, or anything that is burning or smoking.
WARNING:
CAUTION:
2
SAFETY
• Battery acid leakage can cause personal injury and cause damage to the product and surrounding property. If battery leakage occurs, thoroughly wash any
affected skin, making sure to keep battery acid away from eyes, ears, nose and mouth. Immediately wash any clothing or other surface that comes in contact
with leaked battery acid. If a chemical burn occurs or if irritation persists, seek medical attention.Dispose according to Local, State or Federal regulations.
• Batteries are to be inserted following the polarity markings on the product.
• NEVER mix old and new batteries or different brands of batteries. Replace all batteries at the same time
• NEVER mix alkaline, standard (carbon-zinc), rechargeable (nickel cadmium) batteries with this product
• NEVER dispose of batteries in fire, as they may leak and explode.
• Promptly remove exhausted batteries from product.
• Remove batteries before extended storage.
WARNING:
ALKALINE BATTERY WARNING (AAA Battery for Remote Control Only)
• This robot is intended for dry floor use only. Do not use the robot to pick up any wet spills and do not allow the dustbin contents to become wet.
• Do not place anything on top of your robot
• Regularly wipe charge contacts on your robot and charge dock. Failure to maintain charge contacts could impact the robots ability to properly charge.
• Product may not be used with any type of power converter. Use of power converters will void the warranty.
• The battery pack must be removed from the robot before recycling or disposal.
• Do not use non-rechargeable batteries in your robot. For battery replacement contact customer care.
• Before long term storage of your robot, fully charge and remove the battery.
NOTICE:
BDRV1-IB-V6-2L
3
IN THE BOX
1: Charging Dock
2: Roboseries Vacuum BDRV1
3: Charging Adapter
4: Sidebrush
5: Remote
1
5
3
2
4
4
PRODUCT OVERVIEW
FRONT
BACK
BOTTOM
3
1
8
11
13
4
9
12
14
10
5
6
7
2
CHARGING BASE
1: Power Button
2: WiFi Indicator
3: Home Button
4: Charging Contacts
5: Navigation Sensors
6: Dustbin Release Latch
7: Dustbin
8: Charging Contacts
9: Side Brush
10: Omnidirectional Wheel
11: Detection Sensors
12: Left Wheel
13: Right Wheel
14: Main Brush
1: Bin/Filter Release Latch 2: HEPA Filter 3: Screen Filter
(Non removable)
1
2
3
5
DUSTBIN OVERVIEW
1
3
2
1
4
3
2
•Hold to turn on/off
•Press to start/pause cleaning
•Blinking White: Standby Mode
•Solid White (OFF Charge Base): Cleaning
•Solid White (ON Charge Base): Fully Charged
•Breathing White: Charging
•Amber: Error
•Lights off: Off/sleeping
•Press to return to charging dock
for recharging
POWER BUTTON POWER/HOME LED STATES
WIFI INDICATOR STATES
CHARGING INDICATOR LED STATES
HOME BUTTON
CHARGING INDICATOR
WIFI INDICATOR
• BlinkingWhite:NetworkCongurationMode
• SolidWhite:Wiconnected
• LightOff:Widisconnected/Networkcongurationfailure
•Will remain lit Blue when connected to power
4
6ROBOT INDICATORS
SETTING UP YOUR
ROBOSERIES
The following pages outline the complete setup process. For your convenience we created a step-by-step video
to help guide you through setup. Please scan the QR code to access the video and other support content.
7
ABOUT YOUR CHARGING DOCK
SETTING UP THE CHARGING DOCK
Place the charging dock against the wall and make sure the place is an open & uncluttered area. Leaving at least 5 feet in
front of the charging dock and 2 feet on both sides of the charging dock.
NOTE: Clearance around the charging base is necessary to prevent obstructions when the Vacuum returns to charge.
Avoid using a power source that may inadvertently be switched off (e.g. power strip, outlet controlled by a light switch,
GFCI).
Plug the power adapter into the port on the bottom of the charging
dock and secure the cable into the channel.
Choosealocationonahardoorsurfacenearapoweroutlet.Placethechargingdock
against the wall as shown. Plug the power adapter into a functioning wall outlet.
1 2
1
8SETTING UP THE CHARGING DOCK
Table des matières
Langues :
Autres manuels Black & Decker Aspirateur
Black & Decker
Black & Decker DV9610NF Manuel utilisateur
Black & Decker
Black & Decker Dustbuster ACV1205T Manuel utilisateur
Black & Decker
Black & Decker PAD120 Manuel utilisateur
Black & Decker
Black & Decker Dust Buster CFV1200 Manuel utilisateur
Black & Decker
Black & Decker DV60XXY Manuel utilisateur
Black & Decker
Black & Decker DV60XXY Manuel utilisateur
Black & Decker
Black & Decker Powerful Solutions PD1200-XE Manuel utilisateur
Black & Decker
Black & Decker bbs1801 Manuel utilisateur
Black & Decker
Black & Decker VC50 Instructions d'installation
Black & Decker
Black & Decker HLVA315J Manuel utilisateur
Black & Decker
Black & Decker Dustbuster NW4860SPT-B3 Manuel utilisateur
Black & Decker
Black & Decker CWV9610SPT-B3 Manuel utilisateur
Black & Decker
Black & Decker Orb-it ORB48 Manuel utilisateur
Black & Decker
Black & Decker PD1800EL Manuel utilisateur
Black & Decker
Black & Decker CHV1410L Series Manuel utilisateur
Black & Decker
Black & Decker HNVC215B Manuel utilisateur
Black & Decker
Black & Decker pav1205 Manuel utilisateur
Black & Decker
Black & Decker VO1850 Manuel utilisateur
Black & Decker
Black & Decker Dustbuster Manuel utilisateur
Black & Decker
Black & Decker FV1205 Manuel utilisateur
