Black & Decker BXSH44004GB Manuel utilisateur

BXSH44004GBwww.blackanddecker.co.uk

This product is only suitable for well-insulated

spaces or occasional use.

ENGLISH (Original instructions)

What’s in the box

Instruction Manual

33’’ Tower Heater

Remote Control

Features

1. Control Panel

2. Display Screen

3. Air Outlet

4. Remote Control Storage

5. Power On/Off Switch

6. Timer Key

7. ‘-‘ Key

8. ‘+’ Key

9. Mode Key

10.Oscillation Key

11. On/Standby Key

12.Lock Indicator

13.Unit Indicator

14.Degree Indicator

15.Hour Indicator

16.Heat Setting Indicator

17.Timer Indicator

18.Intelligent Sensor

19.Low Speed Setting

20.High Speed Setting

21.Oscillation Indicator

712

19 20 21

13 146 8 9

10 11

17 15

18 16

ENGLISH

(Original instructions)

Intended Use

Your BLACK+DECKER BXSH44004GB 33’’ PTC

Personal Heater has been designed for heating

small and medium spaces.

This appliance is intended for indoor household use

only.

Thank you for choosing BLACK+DECKER. We hope

that you will enjoy using this product for many years.

Safety Instructions

WARNING: Read all safety

warnings and all instructions.

Failure to follow the warnings and

instructions listed below may result

in electric shock, re and/or serious

injury.

♦ Read this manual carefully before

using the appliance.

♦ The intended use is described in

this manual.

♦ The use of any accessory or

attachment or the performance of

any operation with this appliance

other than those recommended in

this instruction manual may present

a risk of personal injury.

♦ Retain this manual for future

reference.

♦ WARNING: When using mains-

powered appliances, basic safety

precautions, including the following,

should always be followed to

reduce the risk of re, electric

shock, personal injury and material

damage.

Using Your Appliance

Please read the operating

instructions carefully before using

your personal heater for the rst time.

♦ Check that the voltage of the main

circuit corresponds with the rating

of the appliance before operating.

♦ The heater must not be located

immediately below a socket outlet.

♦ Do not use this heater in the

immediate surroundings of a bath,

a shower or a swimming pool.

♦ The appliance is not to be used

by persons (including children)

with reduced physical, sensory

or mental capabilities, or lack of

experience and knowledge, unless

they have been given supervision

or instruction.

♦ In order to avoid overheating, do

not cover the heater.

♦ Children of less than 3 years should

be kept away unless continuously

supervised.

♦ Children aged from 3 years and

less than 8 years shall only switch

on/off the appliance provided that

it has been placed or installed

in its intended normal operating

position and they have been

given supervision or instruction

concerning use of the appliance

in a safe way and understand the

hazards involved. Children aged

from 3 years and less than 8 years

shall not plug in, regulate and clean

the appliance or perform user

maintenance.

ENGLISH (Original instructions)

♦ CAUTION: Some parts of this

product can become very hot and

cause burns. Particular attention

has to be given where children and

vulnerable people are present.

♦ Children shall not play with the

appliance.

♦ Do not let the cable hang over the

edge of a table or counter or let

it come into contact with any hot

surfaces.

♦ The use of accessory attachments

is not recommended by the

appliance manufacturer, apart from

those supplied with this product.

♦ Do not pull the plug out by the

cable as this may damage the plug

and/or the cable.

♦ Do not use this product for anything

other than its intended use.

♦ This appliance is for household use

only.

♦ Do not carry the appliance by the

power cable.

♦ Do not use the appliance outdoors.

♦ Do not operate with wet hands.

♦ Use of an extension cable with this

appliance is not recommended.

However, if it is necessary to use

an extension lead, ensure that

the lead is suited to the power

consumption of the appliance to

avoid overheating of extension

cable, appliance or plug point. Do

not place the extension cable in a

position where it can be pulled on

by children or animals or tripped

over.

♦ Always unplug the unit when not in

use or before cleaning.

♦ The manufacturer does not accept

responsibility for any damage

or injury caused by improper or

incorrect use, or for repairs carried

out by unauthorised personnel.

Safety Of Others

♦ Close supervision is necessary

when any appliance is used by or

near children.

♦ Children should not play with the

appliance.

♦ Cleaning and user maintenance

should not be undertaken by

children without supervision.

♦ Take care when any appliance is

used near pets.

♦ Do not allow the cord to become

twisted or come into contact with

children.

After Use

♦ While cleaning, DO NOT use a wet

cloth or use water on any part of

the unit, as this may cause a short

circuit or electrical shock.

♦ Keep this unit clean. Do not allow

objects to enter the ventilation

opening as this may cause electric

shock, or damage to the unit.

Switch off at the wall socket then

remove the plug from the socket

when not in use or before cleaning.

ENGLISH

(Original instructions)

♦ Check all inlets and outlets from

time to time for accumulated dust.

♦ Disconnect the unit from mains

outlet when it is not in use, or

before relocating or cleaning it.

♦ Switch off, remove the plug from

the socket and let the appliance

cool down before leaving it

unattended and before changing,

cleaning or inspecting any parts of

the appliance.

♦ When not in use, the appliance

should be stored in a dry place.

Children should not have access to

stored appliances.

Inspections And Repairs

♦ Do not attempt to dismantle, repair

or remould any part of the unit. This

should only be done by a qualied

service agent. Even the change of

power cable should be done by a

qualied person.

♦ In the unlikely event the appliance

develops a fault, stop using it

immediately and seek advice from

the manufacturer.

♦ In case of technical problems,

switch off the product and do not

attempt to repair it yourself. Return

the appliance to an authorised

service facility for examination,

adjustment or repair. Always

insist on the use of original spare

parts. Failure to comply with the

above mentioned precautions and

instructions, could affect the safe

operation of this product.

Additional Safety Instructions for

This Appliance

♦ Install the unit on at and hard oor

to diminish vibration or noise.

♦ Always operate the appliance on a

smooth, even, stable surface. Do

not place the unit on a hot surface.

♦ Ensure that the unit is switched off

after use.

♦ Do not immerse cables, plugs or

any part of the appliance in water

or any other liquid.

♦ Operate the unit only at the voltage

specied.

♦ Do not use the unit near open

windows, as contact with rain and

other natural elements could cause

an electrical hazard

♦ Do not put heavy objects on the

appliance.

♦ Do not tip the unit on its side.

♦ Never insert any other object into

the unit body to avoid any hazard

or unit failure.

♦ Do not put the unit close to

heat-generating devices or

near ammable and dangerous

materials.

♦ If the supply cable is damaged,

it must be replaced by the

manufacturer or its service agent or

a similarly qualied person in order

to avoid a hazard.

♦ For optimal airow circulation,

leave a distance of at least 1 metre

around the appliance on every side.

ENGLISH (Original instructions)

Always direct the airow in order

to optimise heating. Avoid corners,

small objects and other surfaces

or objects which may impede the

airow.

♦ The appliance must be positioned

so that the plug is accessible.

♦ Always turn the heater off and

unplug it from the mains before

attempting to move it.

WARNING: Do not place the unit

on or near a hot gas electric burner.

Electrical safety

Before use, check that the mains voltage

corresponds to the voltage on the rating plate.

This product must be earthed.

Always check that the mains voltage

corresponds to the voltage on the rating

plate.

♦ Appliance plugs must match the outlet. Never

modify the plug in any way.

♦ Do not use any adapter plugs with earthed (Class

1) appliances. Unmodied plugs and matching

outlets will reduce the risk of electric shock.

♦ To avoid the risk of electric shock, do not immerse

the cord, plug or appliance in water or other liquid.

Extension cables & class 1 product

♦ A 3 core cable must be used as your tool is

earthed and of class 1 construction.

♦ Up to 30m (100 ft) can be used without loss of

power.

♦ If the supply cord is damaged, it must be

replaced by the manufacturer or an authorised

BLACK+DECKER Service Centre in order to avoid

a hazard.

Labels on Appliance

The following pictograms along with the date code

are shown on the appliance:

WARNING: Hot surface

WARNING: Do not cover

Warning! Before assembling, switch the appliance

off and remove the plug from the socket.

ENGLISH

(Original instructions)

Features

1. Control Panel

2. Display Screen

3. Air Outlet

4. Remote Control Storage

5. Power On/Off Switch

6. Timer Key

7. ‘-‘ Key

8. ‘+’ Key

9. Mode Key

10.Oscillation Key

11. On/Standby Key

12.Lock Indicator

13.Unit Indicator

14.Degree Indicator

15.Hour Indicator

16.Heat Setting Indicator

17.Timer Indicator

18.Intelligent Sensor

19.Low Speed Setting

20.High Speed Setting

21.Oscillation Indicator

Use

About the Controls

♦ Programmable 24-hour timer

♦ 3 heat settings and 2 fan settings

♦ Adjustable thermostat

♦ Oscillation function

Turning the Unit On or Off

♦ To turn the unit On or Off, plug it into a mains

socket and ick the Power On/Off switch at

the back of the appliance to the On position

(represented by the symbol ‘I’). The unit will

give off a beeping sound to indicate it has been

powered up.

♦ To turn the appliance off, press the On/Standby

button on the remote control or the unit’s control

panel while the unit is in operation to put it into

Standby mode. A countdown will begin on the

unit’s LED screen. When the timer reaches ‘0’, the

unit will automatically turn itself off

NOTE: The length of the shut-off countdown timer

will vary depending on the selected heat settings and

the duration of the heating cycle. If the unit was used

at a low setting and for a short time, the cool-down

period will be quicker, and the timer will be shorter;

if it was used at a higher temperature or for a longer

period of time, the cool-down process will take

longer, and the timer will reect this.

♦ When the countdown has concluded and the unit

has returned to Standby mode, ick the Power On/

Off switch to the Off position (represented by the

symbol ‘O’) to turn the unit off.

NOTE: To ensure optimal functionality, take care

to point the remote control directly at the unit’s

LED display when controlling the unit hands-free.

If the remote is not pointed directly at the display,

button presses will not be recognised and the unit’s

performance will be affected. This principle applies

to all remote-controlled functionalities described

below.

Heat Setting Selection

♦ This heater offers a choice of Low, Medium and

High heat settings and Medium and High fan

settings.

♦ Press the ‘MODE’ button on the remote control

or the unit’s control panel to cycle through the

available heat and fan settings. The corresponding

indicator will light up on the unit’s display screen to

show each setting has been selected.

ENGLISH (Original instructions)

Temperature Selection

♦ The unit’s temperature can be adjusted manually

in any of the 3 available heat settings.

♦ Use the ‘+’ or ‘-‘ buttons on the remote control

or the unit’s control panel to manually adjust the

heating output temperature. Use the ‘+’ button

to increase the temperature, or the ‘-‘ button to

decrease it.

NOTE: The temperature will increase or decrease

by increments of 1 degree, from a minimum of 5 to a

maximum of 35 degrees.

NOTE: The temperature can only be manually

selected when the unit is in heating mode; in cooling

mode, temperature selection is automatic and the

temperature level cannot be adjusted.

Intelligent Mode

♦ This unit is complete with an intelligent heating

mode. In this mode, the unit will automatically

detect room temperature and adjust its settings

accordingly, as follows:

♦ Whenever room temperature is more than 2

degrees lower than the control temperature set in

the unit, the unit will automatically default to the

Medium heat setting.

♦ Whenever the ambient temperature is within 2

degrees of the set control temperature, the unit

will default to the Low heat setting.

♦ Whenever the ambient temperature is lower

than the set control temperature, the unit will

automatically stop heating.

NOTE: The unit will automatically default to

Intelligent mode whenever it is rst turned on. The

corresponding indicator will light up on the unit’s LED

display to show this mode is activated. To select this

mode when any other heating or cooling mode is

active, press the ‘Mode’ button on the remote control

or the unit’s control panel until the corresponding

indicator lights up on the unit’s LED display.

♦ Press the ‘-’ and ‘+’ keys on the remote control or

the unit’s control panel when in Intelligent mode to

change the control temperature for this setting.

Setting the Timer

♦ The unit is equipped with a programmable 24 hour

timer.

♦ Press the Timer button on the remote control or

the unit’s control panel to activate the timer.

♦ Once the timer has been activated, press the ‘+’

and ‘-‘ buttons on the remote control or the unit’s

control panel to pre-set the duration of the heating

cycle, from 0 to 24 hours. Press the ‘+’ button to

increase the length of the timed heating cycle, or

the ‘-‘ button to decrease it.

NOTE: The length of the timed cycle will increase

or decrease by increments of 1 hour, from 0 up to

24 hours.

Oscillation

♦ This heater is equipped with an oscillation

function.

♦ To activate the oscillation function, press the

Oscillation button on the remote control or the

unit’s control panel. The corresponding indicator

will light up to show the oscillation function has

been selected.

♦ Press the Oscillation button again while the

function is in operation to turn it off.

The Child Lock Function

♦ This unit is equipped with a programmable child

lock, which provides added safety when the

heater is in use.

♦ To activate the child lock function, simultaneously

press and hold the - and + buttons on the remote

control or the unit’s control panel. There will be a

sound prompt and the unit will no longer respond

to button presses to indicate the child-lock

function has been activated.

♦ To remove the child lock once it has been

activated, simultaneously press and hold the

- and + buttons on the remote control or the

unit’s control panel again while this function is in

operation. There will be a sound prompt and the

unit will resume normal functionality to indicate the

child-lock function has been de-activated.

NOTE: The unit can be put into Standby mode

while the child lock function is activated, but

cannot be turned on again until this function has

been cancelled. However, the child lock can be

ENGLISH

(Original instructions)

de-activated even after the unit has been put into

Standby mode. Carry out the process detailed above

after the unit has been powered down to de-activate

the child lock function while in Standby mode. There

will be a sound prompt to indicate the child-lock

function has been de-activated.

Safety Cut-Out

♦ This unit is equipped with a safety cut-out device,

which will automatically kick in whenever the unit

overheats or is tipped over.

♦ The safety cut-out device will activate whenever

the unit reaches an inner working temperature

of more than 50 degrees Centigrade. When this

function activates, the unit will automatically shut

down, and the text ‘FF’ will ash on the unit’s LED

display to show the safety cut-out has activated.

NOTE: While the safety cut-out is in operation, the

unit will not respond to any commands or button

presses. The unit will need to be switched off or

unplugged from the mains before normal operation

can resume.

Tip-Over Switch

♦ In addition to the safety cut-out, this unit is

also complete with a tip-over switch, which will

interrupt operation whenever the heater is tipped

off-balance or toppled over. This function will

automatically activate regardless of if the unit is

turned on or off.

♦ When the safety switch activates, the unit will

automatically stop operating and the text ‘E3’ will

appear on the LED display.

NOTE: When the safety tip-over switch is active,

the unit will not respond to any commands or button

presses. The unit will need to be set back upright,

switched off or unplugged from the mains before

normal operation can resume.

Cleaning and maintenance

WARNING: Before cleaning and maintenance,

switch the appliance off and remove the plug from

the socket, to prevent electric shock.

♦ Do not immerse any part of the appliance, power

cord or plug in liquids.

♦ Use a soft damp cloth to wipe the surface. Avoid

using detergent, spray or chemicals as these may

cause damage to the appliance.

Removable Filter

♦ This unit is equipped with a removable and

washable lter.

♦ To clean the lter, start by removing it from its slot

at the back of the unit. To do this, press the tab at

the top of the lter to loosen it, then pull it away

from the main body of the unit.

♦ Once the lter has been removed, simply rinse

it under running water to clean it, then leave it to

air dry.

NOTE: Ensure the lter is thoroughly dry before

replacing it into the unit.

♦ When the lter has fully dried off, push it back

into its slot at the back of the unit until it clicks into

place.

Mains plug replacement

If a new mains plug needs to be tted:

♦ Safely dispose of the old plug.

♦ Connect the brown lead to the live terminal in the

new plug.

♦ Connect the blue lead to the neutral terminal.

♦ If the product is class I (earthed), connect the

green/yellow lead to the earth terminal.

Note! If your product is class II double insulated

(only 2 wires in the cord set), no connection is to be

made to the earth terminal.

Follow the tting instructions supplied with good

quality plugs. Any replacement fuse must be of the

same rating as the original fuse supplied with the

product.

WARNING: The above section on mains plug

replacement is for authorized service centre

persons.

ENGLISH (Original instructions)

Protecting the environment

Separate collection. Products and

batteries marked with this symbol must

not be disposed of with normal household

waste.

Products and batteries contain materials that can

be recovered or recycled, reducing demand for

raw materials. Please recycle electrical products

and batteries according to local provisions. Further

information is available at www.2helpU.com.

Technical data

BXSH44004GB

Input voltage V AC 220 - 240

Frequency Hz 50

Power input W2200

Weight KG 8.55

Product Guarantee

This product comes with a 2 Year guarantee from the

original date of purchase. If any defect arises due to

faulty materials of workmanship, the faulty products

must be returned to the place of purchase. Refund or

replacement is at the discretion of the retailer. This

guarantee is in addition to and in no way prejudices

your statutory rights.

The Following Conditions Apply:

♦ The product must be returned to the retailer

with proof of purchase or a receipt within the

1st year of purchase. For any product related

issues after 12 months please contact our

customer services team.

♦ The product must be installed and used in

accordance with the instructions contained in

this instruction guide.

♦ It must be used only for domestic purposes.

♦ It does not cover wear and tear, damage,

misuse or consumable parts.

♦ This guarantee is valid in the UK and Republic

of Ireland.

For all customer service enquires please contact

us below;

RKW,

Sutton House,

Berry Hill Road,

Stoke-on-Trent,

ST4 2NL

Email blackanddecker@rkwltd.com

Tel 0333 220 6089

Table des matières

Autres manuels Black & Decker Chauffage

Black & Decker

Black & Decker 200CV Instructions d'installation

Black & Decker

Black & Decker BXSH2003E Manuel utilisateur

Black & Decker

Black & Decker BXCSH2001E Manuel utilisateur

Black & Decker

Black & Decker BXRA43006GB Manuel utilisateur

Black & Decker

Black & Decker BDUH100-201 Instructions d'installation

Black & Decker

Black & Decker BDH-104 Manuel utilisateur

Black & Decker

Black & Decker BHTC571 Manuel utilisateur

Black & Decker

Black & Decker OR12FB Manuel utilisateur

Black & Decker

Black & Decker Heat Xtreme 100CH-MEX Series Instructions d'installation

Black & Decker

Black & Decker BDCH100-301 Instructions d'installation

Black & Decker

Black & Decker BDH-J12 Manuel utilisateur

Black & Decker

Black & Decker BDCV350 Manuel utilisateur

Black & Decker

Black & Decker BXRA1500E Manuel utilisateur

Black & Decker

Black & Decker BDCH575 Instructions d'installation

Black & Decker

Black & Decker BDH-105 Manuel utilisateur

Black & Decker

Black & Decker BHDC500W46 Manuel utilisateur

Black & Decker

Black & Decker 7BDQ1000 Manuel utilisateur

Black & Decker

Black & Decker HX210-B5 Manuel utilisateur

Black & Decker

Black & Decker BXSH2001E Manuel utilisateur

Black & Decker

Black & Decker BDH-D16 Manuel utilisateur

Black & Decker

Black & Decker BDCH550 Instructions d'installation

Black & Decker

Black & Decker HX340 Manuel utilisateur

Black & Decker

Black & Decker BHTI06 Manuel utilisateur

Black & Decker

Black & Decker HX175 Manuel utilisateur

Manuels Chauffage populaires d'autres marques

oventrop

oventrop Regucor Series Manuel utilisateur

Blaze King

Blaze King CLARITY CL2118.IPI.1 Manuel utilisateur

ELMEKO

ELMEKO ML 150 Manuel utilisateur

BN Thermic

BN Thermic 830T Manuel utilisateur

KING

KING K Series Mode d’emploi

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Guide de démarrage rapide

Well Straler

Well Straler RC-16B Manuel utilisateur

EUROM

EUROM 333299 Manuel utilisateur

Heylo

Heylo K 170 Manuel utilisateur

Eterna

Eterna TR70W Manuel utilisateur

Clarke

Clarke GRH15 Mode d’emploi

IRSAP

IRSAP The Radiator Company Ovali Manuel utilisateur

Empire Heating Systems

Empire Heating Systems WCC65 Manuel utilisateur

Wetekom

Wetekom 92 86 43 Manuel utilisateur

Desa

Desa SPC170-F Manuel utilisateur

Watlow

Watlow Watrod Electric Tubular Heaters Manuel utilisateur

Haverland

Haverland ECO-DRY GPS Series Manuel de la liste des pièces

Stelpro

Stelpro ASILVC2060 Series Manuel utilisateur