Black & Decker FX400 Manuel utilisateur

FX400

FX400BMG

www.blackanddecker.ae

ENGLISH

Note: Parts A-F and K-R is available only with FX400BMG

Parts Identiﬁcation

A. Filler Cap

B. Lid

C. Blender jug

D. Jug base

E. Jug seal

F. Blade holder

G. Blade

H. Motor coupling

I. Food processor body

J. Control knob

K Mincer jug lid

L. Mincer jug

M. Mincer blade

N. Mincer blade holder

O. Grinder jug

P. Grinder blade

Q. Grinder blade holder

R. Mincer spatula

ENGLISH

Parts Identiﬁcation

S. Food processor jug

T. Blade holder

U. Emulsiﬁer

V. Kneading blade

W. Stainless steel chopping blade

X. Grating disc

Y. Food processor jug lid

Z. Pusher

ENGLISH

Intended use

Your Black & Decker appliance comes with 7

accessories* to perform below functions:

Stainless Steel blade for chopping, beating,

creaming, crumbling, cutting, folding in,

mashing, mincing and mixing.

Shredding and Slicing disc for grating and

shredding vegetables, fruits and cheese. The

reverse side of this disc is used for cutting and

slicing vegetables and fruits.

Fanned disc for whisking, whipping and

emulsifying.

Separate blade for kneading dough.

** Blender for blending, crushing, foaming,

grinding, pureeing, homogenizing, liquidizing,

milling, shaking and stirring.

**Grinder mill for grinding coffee, herbs and

spices.

** Mincer mill for mincing meat and chopping

vegetables

Do not use this appliance for any other purpose.

This product is intended for indoor household

use only.

*7 accessories with model FX400BMG

**These accessories are available with model

FX400BMG

Read this entire manual carefully

before using the appliance.

Safety instructions

• Warning! When using mains-powered

appliances, basic safety precautions,

including the following, should always be

followed to reduce the risk of ﬁre, electric

shock and personal injury.

• The intended use is described in this manual.

The use of any accessory or attachment or

the performance of any operation with this

appliance other than those recommended in

this instruction manual may present a risk of

personal injury.

• Retain this manual for future reference.

Using your appliance

• Always take care when using the appliance.

• Never pull the power supply cord to

disconnect the plug from the socket. Keep the

power supply cord away from heat, oil and

sharp edges.

• Do not place the appliance on or near heat

sources or in a heated oven.

• Do not use the appliance outdoors.

• Always protect the motor unit from water or

excessive humidity.

• If the power supply cord is damaged during

use, disconnect the appliance from the power

supply immediately. Do not touch the power

supply cord before disconnecting from the

power supply.

• Disconnect the appliance from the power

supply when not in use, before ﬁtting or

removing parts and before cleaning.

• Never let the appliance operate unattended.

• Never reach into the jar with your ﬁngers or

an object while the appliance is running.

ENGLISH

• Only remove the jar after you have switched

the appliance off and any moving parts have

stopped.

• Do not touch the cutting blades.

• Keep any loose clothing or long hair away

from the feeding tube and any moving parts.

• Care shall be taken when handling the sharp

cutting blades, emptying the bowl and during

cleaning.

• Do not immerse the appliance, cord set or

plug in liquids.

Safety of others

• This appliance is not intended for use by

persons (including children) with reduced

physical sensory or mental capabilities, or

lack of experience and knowledge, unless

they have been given supervision or

instruction concerning use of the appliance

by a person responsible for their safety.

• Children should be supervised to ensure that

they do not play with the appliance.

After use

• Remove the plug from the socket before

leaving the appliance unattended and before

changing, cleaning or inspecting any parts of

the appliance.

• When not in use, the appliance should be

stored in a dry place. Children should not

have access to stored appliances.

Inspection and repairs

• Switch off the appliance before cleaning,

changing accessories or approaching parts

which move in use

• Before use, check the appliance for

damaged or defective parts. Check for

breakage of parts, damage to switches and

any other conditions that may affect its

operation.

• Do not use the appliance if any part is

damaged or defective.

• Do not use the appliance if the blade is

damaged.

• Have any damaged or defective parts

repaired or replaced by an authorised repair

agent.

• Before use, check the power supply cord for

signs of damage, ageing and wear.

• Do not use the appliance if the power supply

cord or mains plug is damaged or defective.

• If the power supply cord or mains plug is

damaged or defective it must be repaired by

an authorised repair agent in order to avoid a

hazard. Do not cut the power supply cord

and do not attempt to repair it yourself.

• Never attempt to remove or replace any

parts other than those speciﬁed in this

manual.

Electrical safety

Before use, check that the mains voltage

corresponds to the voltage on the rating plate.

This appliance is double insulated in

accordance with EN 60335-2-14;

therefore no earth wire is required.

• To avoid the risk of electric shock, do not

immerse the cord, plug or motor unit in water

or other liquid.

• Check that the supply voltage shown on the

rating plate of the appliance matches that of

your electrical system. Any connection error

will invalidate the guarantee.

ENGLISH

Mains plug replacement

If a new mains plug needs to be ﬁtted:

•Safely dispose of the old plug

•Connect the brown lead to the live terminal

of the new plug

•Connect the blue lead to the neutral terminal

•If the product is class I (earthed), connect

the

green/yellow lead to the earth terminal

Warning! If your product is class II double

insulated (only 2 wires in the cord set), no

connection is to be made to the earth terminal

• Follow the ﬁtting instructions supplied with

good quality plugs

•Any replacement fuse must be of the same

rating as the original fuse supplied with the

product.

Warning! The above section on mains plug

replacement is for authorized service centre

personals.

Assembly

1. Wash all detachable parts (see chapter

‘Maintenance and cleaning’).

2. For the food processor ﬁt the required

accessory blade (U, V, W or X) onto the

blade holder (T). ﬁt the assembled blade

holder into the food processor jug (S)s

3. For the blender ﬁt the jug seal (E) around the

base of the blender blade (G), place the

blade (G) into the blade holder (F) then place

the blade holder onto the blender jug base

(D).

4. For the mincer or grinder ﬁt the jug seal (E)

into the required blade holder (N or Q), then

place the blade holder (N or Q) on to the

required jug base (L or O).

5. Secure the blade holder (F, N or Q) by

turning it anti clockwise.

Use

1. Place the appliance on a ﬂat, stable surface.

2. Put the ingredients into the required jug.

3. If using the food processor ﬁt the the lid (Y)

onto the jug (S) by turning it clockwise.

4. If using the blender push the lid (B) and ﬁller

cap (A) onto the jug (C).

5. If using the grinder or mincer seal the jug by

ﬁtting the required blade holder (N or Q) and

with the seal (E) and secure by turning

anti-clockwise.

Note: When using the blender or mincer, the

correct lid must be ﬁtted.

6. Place the jug onto the food processor body

(I).

7. Secure the jug by turning it anti clockwise.

8. Connect it to the electrical supply and select

the required speed using the rotary switch.

The following settings are available:-

P = Pulse Operation

O = Power Off

1 = Low Speed

2 = High Speed

The appliance should be disconnected

from the mains supply before removing

the jug.

ENGLISH

Recommendations when food

processing

*1 Use the Chopping blade (W)

*2 Use the kneading blade (V)

*3 Use the grating disc (X)

*4 Use the Emulsiﬁer (U)

Note: The The food processor functions should

not be run for longer than 1 minute. After a

continuous run of 1 minute, the blender should

be allowed to cool down for at least 2 minutes

before further use.

Warning: Pulse mode should not be operated

more than 10 sec at a time.

Recommendations when

blending (FX400BMG Only)

Note: The blender should not be run for longer

than 1 minute. After a continuous run of 1

minute, the blender should be allowed to cool

down for at least 2 minutes before further use.

Warning: Pulse mode should not be operated

more than 10 sec at a time.

Recommendations when

grinding (FX400BMG Only)

Note: The dry grinder should not be

continuously run for longer than 40 seconds.

Warning: Pulse mode should not be operated

more than 10 sec at a time.

Warning: Max capacity of Grinder mill is 50g

and mincer mill is 150g

Chopping *1 Vegetables Pulse or 2 15 sec

and fruits

Chopping *1 Meat, cheese 1 20 sec

and chocolate

Blending *1 Soups and 1 20 sec

thick drinks

Pureeing *1 Cooked vegetables 1 10-15 sec

and soft fruits

Mixing *1 Pastry and scones 2 40 sec

Mashing *1 Cooked potatoes 2 60 sec

and baby food

Kneading *2 Bread dough 1 20 sec

Folding in *2 Mousse batter 1 15 sec

Creaming *2 Cake batter 1 30 sec

Slicing *3 Vegetables and fruits 1 or 2 5 sec

Slicing *3 Potatoes and cheese 1 5 sec

Shredding *3g Vegetables and fruits 1 or 2 5 sec

Grating *3 Cheese and 1 5 sec

chocolate

Whisking *4 Eggs 2 1-2 min

Whipping *4 Cream 2 1-2 min

Emulsifying *4 Light batters for 2 1-2 min

omlettes, pancakes etc

Function Types of food Speed Time

Blending Liquids 2 15 sec

Liquidizing Fruits or vegetables 1 30 sec

cut in cubes with equal

amount of water

Crushing Ice cubes of Pulse or 1 15 sec

dimension 3x2cm

Foaming milk shakes, juices etc 2 20 sec

Pureeing Vegetables and 1 30 sec

soft fruits

Stirring Batter or soups 1 1 min

Function Types of food Speed Time

Dry grinding Coffee beans Pulse 10-20 sec

Dry grinding Dry herbs 1 20 sec

Dry grinding Spices Pulse 10-20 sec

Function Types of food Speed Time

ENGLISH

Warning! The grinder should NOT be used for

wet grinding of hard food materials like pulses,

beans, grains etc. This will lead to damage of

blades and reduction of motor life span.

Recommendations when

mincing (FX400BMG Only)

Note: The mincer should not be continuously

run for longer than 40 seconds.

Warning: Pulse mode should not be operated

more than 10 sec at a time.

Warning: Max capacity of Grinder mill is 50g

and mincer mill is 150g

Useful advice

• Place the appliance on a clean, ﬂat work

surface.

• Connect the appliance to a suitable electrical

supply. Rotate the control knob (J) to the

required speed.

• When blending is complete return the control

knob to the off (0) position.

• Once the blade (F) has come to a complete

stop, lift the jug (C) from the blender body (I).

• Remove the lid (B) and pour the ingredients

into a suitable container.

Note: Ingredients can be added by inserting

them through the hole left when the ﬁller cap (A)

is removed.

Warning! Never operate the Blender without the

lid (B) ﬁtted.

Warning! Never operate the Food processor

without the lid (Y) ﬁtted.

Warning! Never operate the mincer without lid

(K) ﬁtted

Maintenance & cleaning

• Switch the appliance off, remove the plug

from the wall socket and wait until the blade

has stopped rotating.

• The appliance is easier to clean if you do so

immediately after use.

• Do not use abrasive cleaning agents,

scourers, acetone, alcohol etc. to clean the

appliance.

• All detachable parts are dishwasher-safe.

• Place the detachable plastic parts on the top

tray of the dishwasher. Make sure they are

placed well away from the heating element.

• All removable parts can be cleaned with a

cleaning brush in warm water with some

washing-up liquid and rinse them under the

tap.

• Remove the dirty parts from the motor unit.

Clean the motor unit with a damp cloth.

• Never immerse the motor unit in water nor

rinse it under the tap.

Technical data

Mincing Meat cubes of Pulse or 1 10-20 sec

dimension 2x2cm

Mincing Pulses soaked for Pulse 30 sec

at least 8 hrs

Mincing Chutney - Vegetables 1 20 sec

and ground spices

with water

Function Types of food Speed Time

Voltage 220 – 240 Volts

Supply 50/60 Hz

Power 400W

Weight 2.8kg

ENGLISH

Protecting the environment

Separate collection. This product must not

be disposed of with normal household

waste.

Should you ﬁnd one day that your Black &

Decker product needs replacement, or if it is of

no further use to you, do not dispose of it with

other household waste. Make this product

available for separate collection.

• Black & Decker provides a facility for

recycling Black & Decker products once they

have reached the end of their working life.

This service is provided free of charge. To

take advantage of this service please return

your product to any authorised repair agent

who will collect them on our behalf.

• You can check the location of your nearest

authorised repair agent by contacting your

local Black & Decker ofﬁce at the address

indicated in this manual. Alternatively, a list of

authorized Black & Decker repair agents and

full details of our after-sales service and

contact are available on the Internet at:

www.2helpU.com.

Warranty

Black & Decker is conﬁdent of the quality of its

products and offers an outstanding warranty.

This warranty statement is in addition to and in

no way prejudices your statutory rights.

The warranty is valid within the territories of the

Member States of the European Union and the

European Free Trade Area.

If a Black & Decker product becomes defective

due to faulty materials, workmanship or lack of

conformity, within 24 months from the date of

purchase, Black & Decker warranty to replace

defective parts, repair products subjected to fair

wear and tear or replace such products to ensure

minimum inconvenience to the customer unless:

The product has been used for trade,

professional or hire purposes;

The product has been subjected to misuse

or neglect;

The product has sustained damage

through foreign objects, substances or

accidents;

Repairs have been attempted by persons

other than authorised repair agents or

Black & Decker service staff.

To claim on the warranty, you will need to submit

proof of purchase to the seller or an authorised

repair agent. You can check the location of your

nearest authorised repair agent by contacting

your local Black & Decker ofﬁce at the address

indicated in this manual.

Alternatively, a list of authorised Black & Decker

repair agents and full details of our after-sales

service and contacts are available on the Internet

at: www.2helpU.com.

FRANÇAIS

Identiﬁcation des pièces

A. Bouchon de remplissage

B. Couvercle

C. Bol mixeur

D. Base du récipient

E. Joint d’étanchéité

F. Porte-lame

G. Lame

H. Accouplement du moteur

I. Corps du robot culinaire

J. Bouton de réglage

K Couvercle pour le récipient du hachoir

L. Récipient du hachoir

M. Lame du hachoir

N. Porte-lame du hachoir

O. Récipient du moulin

P. Lame du moulin

Q. Porte-lame du moulin

R. Spatule pour le hachoir

Autres manuels pour FX400

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Black & Decker Robot culinaire

Black & Decker

Black & Decker QUICK 'N EASY FP1336 Instructions d'installation

Black & Decker

Black & Decker HC306 Manuel utilisateur

Black & Decker

Black & Decker FP4150 Manuel utilisateur

Black & Decker

Black & Decker FP2500 Instructions d'installation

Black & Decker

Black & Decker MultiPREP Slice 'N Dice SL3000 Manuel utilisateur

Black & Decker

Black & Decker FX710 - B5 Manuel utilisateur

Black & Decker

Black & Decker FX750 Manuel du propriétaire

Black & Decker

Black & Decker hc 300 Instructions d'installation

Black & Decker

Black & Decker EHC500 Series Instructions d'installation

Black & Decker

Black & Decker FP1000M Manuel utilisateur

Black & Decker

Black & Decker QuickN'Easy FP1200 Series Instructions d'installation

Black & Decker

Black & Decker PowerPro II FP1611SCKT Instructions d'installation

Black & Decker

Black & Decker FP2700SC Manuel utilisateur

Black & Decker

Black & Decker SC350 Manuel utilisateur

Black & Decker

Black & Decker Power Pro FP2650S Instructions d'installation

Black & Decker

Black & Decker HandyChopper HC2000 Instructions d'installation

Black & Decker

Black & Decker HC21K Instructions d'installation

Black & Decker

Black & Decker FP4150 Manuel utilisateur

Black & Decker

Black & Decker Home Essentials HC21 Instructions d'installation

Black & Decker

Black & Decker SL1050 Manuel utilisateur

Black & Decker

Black & Decker FP2510SKT Instructions d'installation

Black & Decker

Black & Decker FP1600 Manuel utilisateur

Black & Decker

Black & Decker FX1000 Manuel utilisateur

Black & Decker

Black & Decker Spacemaker CG700 Instructions d'installation

Manuels Robot culinaire populaires d'autres marques

INNOLIVING

INNOLIVING INN-727 Manuel utilisateur

Berkel

Berkel C32 Manuel utilisateur

Beko

Beko CHP5554W Manuel utilisateur

KitchenAid

KitchenAid 5KFP0719 Manuel utilisateur

QUIGG

QUIGG KM 2017Wi.20 Manuel utilisateur

Lakeland

Lakeland PRESS AND CHOP 31557 Manuel utilisateur

Bosch

Bosch MMR08 GB Series Manuel utilisateur

HOFFEN

HOFFEN Chef Express T9532 Manuel utilisateur

Garland

Garland 852 ZG Manuel utilisateur

Robot Coupe

Robot Coupe CL50 Gourmet Manuel utilisateur

SAPIRHOME

SAPIRHOME SP-1111-K Manuel utilisateur

Moulinex

Moulinex DJ3051 Manuel utilisateur

Bosch

Bosch MUM5 Manuel utilisateur

cecotec

cecotec Mambo Touch Manuel utilisateur

KitchenAid

KitchenAid 9KFC0516 Manuel utilisateur

Gorenje

Gorenje SBR 1000 DV Manuel utilisateur

Arzum

Arzum AR 1128 Manuel utilisateur

KitchenAid

KitchenAid 5KFP0719A Manuel utilisateur